Publications associées à Effect of Al2Cu precipitates size and mass transport on the polarisation behaviour of age-hardened Al-Si-Cu-Mg alloys in 0.05 M NaCl

Publications associées (31)

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Zoé Mury, Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Sandro Carrara

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Polydopamine-coated photoautotrophic bacteria for improving extracellular electron transfer in living photovoltaics

Ardemis Anoush Boghossian, Melania Reggente, Hanxuan Wang, Charlotte Elisabeth Marie Roullier, Mohammed Mouhib

Living photovoltaics are microbial electrochemical devices that use whole cell–electrode interactions to convert solar energy to electricity. The bottleneck in these technologies is the limited electron transfer between the microbe and the electrode surfac ...

2024

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Michele Morgante

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

EPFL2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora, Roberto Valenza

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...

Royal Soc Chemistry2024

Multielectron Redox Chemistry of Uranium by Accessing the plus II Oxidation State and Enabling Reduction to a U(I) Synthon

Rosario Scopelliti, Marinella Mazzanti, Ivica Zivkovic, Anne-Sophie Chauvin, Megan Renee Keener, Maxime Christian Gérard Tricoire

Thesynthesis of molecular uranium complexes in oxidation stateslower than +3 remains a challenge despite the interest for their multielectrontransfer reactivity and electronic structures. Herein, we report theone- and two-electron reduction of a U(III) com ...

2023

Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures

Biranche Tandon

Melt electrowriting is a microscale manufacturing technique that uses polymer-based melts to create fibrous structures. An electric field is used to stabilize a continuous molten jet, which is then written onto a substrate as a microscale fiber. Herein, it ...

WILEY-V C H VERLAG GMBH2023

Monitoring and understanding Cu catalyst dissolution during CO2 electroreduction

Jan Vávra

Electrochemical reduction of carbon dioxide is a promising approach to decrease the amount of anthropogenic CO2 being released into the atmosphere, provided that a surplus of renewable electrical energy is available. Copper based materials are at the cente ...

EPFL2022

Visible-light driven water oxidation and oxygen production at soft interfaces

Hubert Girault, Astrid Johana Olaya Avendano, Jorge Gustavo Uranga, Julieta Soledad Riva

The visible light driven water oxidation reaction (WOR) by the organic electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-quinodimethane (TCNQF(4)) was studied at the water|butyronitrile interface. The WOR was performed at neutral pH, and without any ...

Royal Society of Chemistry2022

Ru tailored hydrous cobalt phosphate as a rational approach for high-performance alkaline oxygen evolution reaction

Mohammad Khaja Nazeeruddin

The water splitting is an appealing approach to fulfil the demand of energy without any global concerns. The oxygen evolution reaction is one of way to achieve unlimited energy from water but the low stability, high energy required to drive the reaction (o ...

ELSEVIER SCI LTD2022

Stabilizing Unusual Oxidation States of Lanthanides in Molecular Complexes: Synthesis, Properties, and Reactivity

Aurélien René Willauer

The chemistry of divalent lanthanides has generated increasing interest in the past years due to their redox properties and unique reaction pathways. Notably, molecular complexes of low-valent lanthanides have been shown to be suitable one-electron reducta ...

EPFL2022

Enhanced rate performance of lithium-ion battery anodes using a cobalt-incorporated carbon conductive agent

Xile Hu, Albert Claude Jean-Pierre Daubry

Lithium-ion batteries with enhanced rate performance are of crucial importance for practical applications. Extensive studies on the structural design and surface modification of electrode materials with the aim of improving the rate performance have been r ...

ROYAL SOC CHEMISTRY2022

Lifetime of dielectric elastomer actuators under DC electric fields

Fabio Beco Albuquerque

Dielectric elastomer actuators (DEAs) are interesting soft actuators compared to other actuation technologies owing to large achievable actuation strains, high energy density and fast actuation. However, because DEAs need to be operated under high electric ...

EPFL2022

Ultrafast carrier and quasiparticle dynamics in strongly confined perovskite nanoplatelets

Etienne Christophe Socie

Over the past decade, lead halide perovskites (LHPs) have received considerable attention thanks to their impressive optoelectronic properties. Today, LHP-based devices are one of the most efficient single-junction solar cells, with power-conversion effici ...

EPFL2022

Thin film organic electrochemical transistors based on hybrid PANI/PEDOT:PSS active layers for enhanced pH sensing

Danick Briand, Silvia Demuru, Brince Paul Kunnel

We report on organic electrochemical transistors (OECTs) with active channels made of hybrid inkjet-printed poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and electropolymerized polyaniline (PANI) layers, exhibiting simultaneously impro ...

2021

Dopant Engineering for Spiro‐OMeTAD Hole‐Transporting Materials towards Efficient Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jovana Milic, Jiyoun Seo, Seckin Akin, Hui-Seon Kim, Marco Alejandro Ruiz Preciado

One of the most prominent hole-transporting material (HTM) for hybrid perovskite solar cells has been 2,2″,7,7″-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD), which is commonly doped with metal bis(trifluoromethylsulfonyl)imide ...

2021

Mapping of Chemical Heterogeneity at Surfaces with High-Throughput Wide-Field Second Harmonic Microscopy

Igor Nahálka

Many industrial processes are based on electrochemical reactions using engineered electrocatalysts. However, the current lack of theoretical knowledge obscures efforts to maximize catalysts' efficiency, and the optimization process is mostly empirical. To ...

EPFL2020

Oxygen Plasma/Bismuth Modified Inkjet Printed Graphene Electrode for the Sensitive Simultaneous Detection of Lead and Cadmium

Hubert Girault, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto

In this work, a simple procedure for the preparation of an inkjet printed disposable graphene electrode is reported. Commercial graphene ink was printed on a kapton substrate and the resulting electrode was 30 min treated by oxygen plasma, then modified by ...

2020

Stabilization of p-GaAs electrode surfaces in organic solvent by bi-phenyl rings for spin dependent electron transfer studies

Jean-Philippe Ansermet, Christophe Roussel, Mika Antero Tamski

Biphenyl-4-thiol (B4t) functionalised p-GaAs photocathodes were compared to non-functionalised p-GaAs ones in the presence of methyl viologen cation radical (MV+•) as a redox mediator. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS ...

2020