Publications associées à Identification of material parameters of a tubular dielectric elastomer actuator for a cardiac assist device

Publications associées (28)

Modeling friction and wear using an adaptive discrete-continuum coupling

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Computational Homogenization for Inverse Design of Surface-based Inflatables

Mark Pauly, Florin Isvoranu, Francis Julian Panetta, Yingying Ren, Seiichi Eduardo Suzuki Erazo, Uday Kusupati

Surface-based inflatables are composed of two thin layers of nearly inextensible sheet material joined together along carefully selected fusing curves. During inflation, pressure forces separate the two sheets to maximize the enclosed volume. The fusing c ...

Association for Computing Machinery (ACM)2024

Inversing the actuation cycle of dielectric elastomer actuators for a facial prosthesis

Yves Perriard, Yoan René Cyrille Civet, Paolo Germano, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Alexis Boegli, Quentin Philippe Mario De Menech

Dielectric Elastomer Actuators (DEAs) are a type of smart material described as compliant capacitors. They show impressive performances as soft actuators, such as a high strain and fast response. Nonetheless, replicating natural muscle function with DEAs h ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Permanently magnetized elastomer rotating actuator using traveling waves

Herbert Shea, Jean-Baptiste Chossat

We report a soft actuator that generates continuous rotation of an object placed on it by electromagnetically exciting circular travelling waves in a soft disk. The disk, that serves as the stator, is made of a stretchable composite consisting of segments ...

Iop Publishing Ltd2024

Morphological and Material Programability of a Hall-Effect Based Soft Tactile Sensors

Josephine Anna Eleanor Hughes, Sudong Lee

The different receptors in human skin show not only diversity in the stimuli to which they respond, but also variable sensitivity and directionality. This is often determined by their location or morphology, and can play an important role in filtering or a ...

IEEE2024

Frequency response of fiber reinforced DEAs

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi

Dielectric Elastomer Actuators (DEAs) have emerged as versatile and promising devices for a multitude of applications, including soft robotics, haptic interfaces, and artificial muscles. DEAs are an interesting soft actuator technology due to their high en ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

3D printed large amplitude torsional microactuators powered by ultrasound

Mahmut Selman Sakar, Amit Yedidia Dolev, Mehdi Ali Gadiri, Junsun Hwang

Here, we introduce a design, fabrication, and control methodology for large amplitude torsional microactuators powered by ultrasound. The microactuators are 3D printed from two polymers with drastically different elastic moduli as a monolithic compliant me ...

2024

Additively manufactured stretchable zipping electrostatic actuators

Giulio Grasso

The use of soft and stretchable materials allows the development of adaptive robotic systems and human-machine interfaces that are more natural and comfortable to interact with. One of the application fields that benefits the most from these compliant mate ...

EPFL2024

Edible Soft Actuators based on Konjac Glucomannan for Underwater Operation

Ryo Kanno, Dario Floreano, Jun Shintake, Bokeon Kwak, Markéta Pankhurst

Soft robots are being increasingly developed and deployed for underwater applications such as exploration, monitoring, and rescue owing to their innate compliance, mechanical and chemical stability, and waterproof properties. However, they are still predom ...

2024

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

Herbert Shea, Amir Firouzeh, Edouard Franck Vincent Gustave Leroy

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...

SPRINGERNATURE2023

Efficient approximation of cardiac mechanics through reduced-order modeling with deep learning-based operator approximation

Alfio Quarteroni, Andrea Manzoni

Reducing the computational time required by high-fidelity, full-order models (FOMs) for the solution of problems in cardiac mechanics is crucial to allow the translation of patient-specific simulations into clinical practice. Indeed, while FOMs, such as th ...

Wiley2023

Modeling the mechanics and rheology of porous and granular media: an elastoplastic continuum approach

Lars Kristoffer Uhlen Blatny

The complex mechanics of porous and granular media play a significant role in various industrial processes and natural phenomena. As an example, understanding the mechanics of how failure occurs, localizes and propagates in porous brittle solids under vari ...

EPFL2023

Control-oriented modeling and analysis of tubular dielectric elastomer actuators dedicated to cardiac assist devices

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Armando Matthieu Walter, Ning Liu

This paper deals with the control-oriented modeling of a multilayered dielectric elastomer actuator based tube. The actuator is clamped at both sides and performs a radial displacement. The hyperelastic deformation and the viscoelastic performance, togethe ...

2022

Ultra-high voltage, low power and energy recovering electronics for dielectric elastomer actuators

Raphaël Johannes Charles Mottet

Heart failure is a cardiovascular disease affecting between 1 and 2% of the population of developed countries alone - more than 10 million people - with this number bound to increase due to the ageing of the population. This condition starts to develop its ...

EPFL2022

Adaptation of a solid-state-Marx modulator for electroactive polymer

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Morgan Almanza

Electroactive polymers show promising characteristic such as lightness, compactness, flexibility and large displacements making them a candidate for application in cardiac assist devices. This revives the need for quasi- square wave voltage supply switchin ...

2022

High Permittivity Siloxanes as Promising Materials for Dielectric Elastomer Transducers: From Synthesis to Application

Yauhen Sheima

The speed of change in the modern world is impressive. Within the last 50 years, many devices and technologies have significantly transformed their appearance, intrinsic characteristics and improved their performance. Computers have changed from the size o ...

EPFL2022

Deformation and Fracture of Tough Microstructured Hydrogels

Michael David Kessler

Many natural materials are structured on different length scales. This structuring often leads to an intricate interplay between soft and stiff components, which significantly improves the fracture toughness of these materials. A class of soft material tha ...

EPFL2022

A novel soft cardiac assist device based on a dielectric elastomer augmented aorta: An in vivo study

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Jonathan André Jean-Marie Chavanne, Armando Matthieu Walter, Francesco Clavica, Silje Ekroll Jahren

Although heart transplant is the preferred solution for patients suffering from heart failures, cardiac assist devices remain key substitute therapies. Among them, aortic augmentation using dielectric elastomer actuators (DEAs) might be an alternative tech ...

2022