Publications associées à Open-Source Implementation and Validation of a 3D Inverse Design Method for Francis Turbine Runners

On the prediction of the induced damage by the start-up sequence of Francis turbines: On operational resilience framework

Christophe Nicolet, Mario Paolone, Martin Seydoux, Elena Vagnoni

The number of transient operations in hydraulic machinery connected to power grid, notably start-ups and shut-downs, has observed a substantial increase in recent decades, primarily driven by the global shift toward intermittent renewable energy sources. S ...

Pergamon-Elsevier Science Ltd2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...

IOPscience2024

Wind turbine wake superposition under pressure gradient

Fernando Porté Agel, Arslan Salim Dar

We investigate the effect of pressure gradient on the cumulative wake of multiple turbines in wind tunnel experiments spanning across a range of adverse pressure gradient (APG), zero pressure gradient (ZPG), and favorable pressure gradient (FPG). Compared ...

2024

Towards an improved understanding of wind turbine wakes in complex terrain

Arslan Salim Dar

In this thesis, we explored the effect of certain terrain-induced flow phenomena on the development of wind turbines sited in complex terrain. A combined experimental and analytical approach is used to study wind turbine wakes in different types of complex ...

EPFL2024

The effect of nacelle-to-rotor size on the wake of a miniature wind turbine

Fernando Porté Agel, Arslan Salim Dar, Rim Majzoub

Wind tunnel experiments are performed to investigate the effect of nacelle-to-rotor size on the wake of a wind turbine under different Reynolds numbers. Four different turbine configurations are tested, which vary in the rotor diameter and nacelle length a ...

IOP Science2024

Optimal blade pitch control for enhanced vertical-axis wind turbine performance

Sébastien Le Fouest, Karen Ann J Mulleners

Vertical-axis wind turbines are great candidates to enable wind power extraction in urban and off-shore applications. Currently, concerns around turbine efficiency and structural integrity limit their industrial deployment. Flow control can mitigate these ...

Nature Research2024

Modular segmentation, spatial analysis and visualization of volume electron microscopy datasets

Martin Weigert

Volume electron microscopy is the method of choice for the in situ interrogation of cellular ultrastructure at the nanometer scale, and with the increase in large raw image datasets generated, improving computational strategies for image segmentation and s ...

Nature Portfolio2024

Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization

Mario Paolone, Elena Vagnoni, Aldo Leonardo Alerci

Hydropower plants play a crucial role in the power system facing ambitious renewable energy targets. Due to their inherent controllability, they are well suited to provide flexibility to the grid. However, an increased flexibility provision leads to a prol ...

Pergamon-Elsevier Science Ltd2023

Dynamic stall characterisation and control for vertical-axis wind turbines

Sébastien Le Fouest

According to the International Energy Agency, the global net-zero emissions objective requires the installed wind power capacity to increase 11-fold between 2020 and 2050. The scientific community has recently voiced concerns about the logistic feasibility ...

EPFL2023

Cross-code verification of non-neutral ABL and single wind turbine wake modelling in LES

Fernando Porté Agel, Marwa Souaiby

Large Eddy Simulations (LES) of atmospheric boundary layer (ABL) flow with the actuator disc (AD) for turbine modelling is a widely used method of simulating wind farm flows. Hence, it is important to understand the requirements for achieving a good compar ...

IOP PUBLISHING LTD2023

Multiparty Homomorphic Encryption: from Theory to Practice

Christian Vincent Mouchet

Multiparty homomorphic encryption (MHE) enables a group of parties to encrypt data in a way that (i) enables the evaluation of functions directly over its ciphertexts and (ii) enforces a joint cryptographic access-control over the underlying data. By exten ...

EPFL2023

Wind farm power density optimization according to the area size using a novel self-adaptive genetic algorithm

Fernando Porté Agel, Nicolas Otto Kirchner Bossi

This work studies the power density (PD) optimization in wind farms, and its sensitivity to the available area size. A novel genetic algorithm (PDGA) is introduced, which optimizes PD and the turbine layout, by self-adapting to the PD and to the solutions ...

Pergamon-Elsevier Science Ltd2023

Wind Turbine Wakes in Active Yaw Control: Numerical and Theoretical Studies

Mou Lin

In this thesis, we explore the best practice of simulating the wakes of the turbines under active yaw control (AYC) using large-eddy simulation (LES). In the first study, we validate the blade-element actuator disk model (ADM-BE) for a yawed wind turbine. ...

EPFL2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Practical Implementations of Remote Power Side-Channel and Fault-Injection Attacks on Multitenant FPGAs

Francesco Regazzoni, Mirjana Stojilovic, Ognjen Glamocanin, Dina Gamaleldin Ahmed Shawky Mahmoud

Cloud computing environments increasingly provision FPGAs because of their fine-grained, highly parallel, and flexible hardware architecture. The availability of FPGAs in the cloud fueled research on the security risks associated with exposing FPGA fabric ...

Springer, Cham2023

Advancing atomic force microscopy through open source instrumentation

Mustafa Kangül

Atomic force microscopy (AFM), a member of the scanning probe microscopy (SPM) family, holds a unique position as a nano-characterization instrument in the fields of physics, chemistry, and biology. Its ability to provide atomic resolution and operate in v ...

EPFL2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Projector-based augmented stacking framework for irregularly shaped objects

Yves Weinand, Katrin Beyer, Julien Gamerro, Andrea Settimi, Qianqing Wang, Edward Carlo Giorgio Andò

Augmented reality in additive fabrication is predominantly applied to the manufacturing of structures from regularly shaped materials. Our work however embraces natural heterogeneity, by focusing on the assembly of irregularly shaped elements such as miner ...

2023