Publications associées à {225} habit planes in martensitic steels: from the PTMC to a continuous model

Publications associées (32)

Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron

Julie Nathalie S Gheysen, Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar

We document that in unstressed, undeformed, samples of pure iron containing silica inclusions precipitated by melt deoxidation, the iron matrix and a small fraction of the silica inclusions are locally separated at room temperature by a void. Thermal cycli ...

Springer2023

Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...

Elsevier Science Sa2023

The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics

Helena Van Swygenhoven, Nicola Casati

In situ multiaxial loading during neutron diffraction tests were undertaken on a low-alloyed Quenched and Partitioning (Q&P) Transformation Induced Plasticity (TRIP) Bainitic Ferrite (TBF) steel with dispersed austenite particles. The effect of stress tria ...

2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Complements to Mugge and Friedel's Theory of Twinning

Cyril Cayron

The crystallography of twinning is based on the concepts of simple shear and obliquity introduced by Mugge, Mallard and Friedel at the turn of the last century, with tensor mathematics later developed by Bilby, Bevis and Crocker in the 1960s. We propose a ...

2020

Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study

Helena Van Swygenhoven

An in-situ high resolution digital image correlation investigation during uniaxial tensile deformation reveals the recoverable and the non-recoverable strain mechanisms in a Ni51Ti49 alloy with a mean grain size of 35 mu m. Recoverable strain is due to the ...

2020

What EBSD and TKD Tell Us about the Crystallography of the Martensitic B2-B19′ Transformation in NiTi Shape Memory Alloys

Cyril Cayron

The complex and intricate microstructure of B19′ martensite in shape memory nickel titanium alloys is generally explained with the Phenomenological Theory of Martensitic Crystallography (PTMC). Over the last decade, we have developed an alternative approac ...

2020

Variant selection in martensitic steels

Annick Pauline Baur

The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...

EPFL2019

The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading

Helena Van Swygenhoven, Wei-Neng Hsu

The preferred deformation mechanisms with respect to the load path are studied in a medium stacking fault energy 304 austenitic stainless steel that exhibits both transformation induced plasticity and twinning induced plasticity. In situ neutron diffractio ...

2019

Deformation-induced martensitic transformation under multiaxial loading

Wei-Neng Hsu

The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...

EPFL2019

On the chevron morphology of surface martensite

Roland Logé, Cyril Cayron, Annick Pauline Baur

It is established that the annealing twin boundaries of austenite act as nucleation sites for the martensitic transformation. In the present study, we observe that in surface martensite the transformation only takes place for twin boundaries that are appro ...

2019

A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation

Helena Van Swygenhoven

A modification to the empirical Olson-Cohen strain-induced austenite to martensite transformation kinetic model is proposed. The proposed kinetic model accounts for the stress state at the grain level and the crystallography of the transformation mechanism ...

PERGAMON-ELSEVIER SCIENCE LTD2019

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

Helena Van Swygenhoven, Nicola Casati, Karl Alan Sofinowski

A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...

2019

Sensitivity of Simulated Steel Column Instabilities to Plasticity Model Assumptions

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

Current experimental studies on the seismic behavior of steel wide-flange columns under multi-axis cyclic loading reveal that these members, depending on their geometric characteristics, may be susceptible to axial shortening, out-of-plane deformations and ...

2019

FVPM numerical simulation of the effect of particle shape and elasticity on impact erosion

François Avellan, Ebrahim Jahanbakhsh, Audrey Paulette Solange Maertens, Sebastián Camilo Leguizamón Sarmiento, Siamak Alimirzazadeh

The erosion of hydraulic machines by solid particle impacts is a widespread problem that leads to outage for expensive repairs, efficiency reduction, and cavitation enhancement. Numerical simulations can be used to study the phenomenon, provided they featu ...

ELSEVIER SCIENCE SA2019

Variant Selection in Fe-20Ni-1.8C under Bending

Roland Logé, Cyril Cayron, Annick Pauline Baur

Variant selection is commonly observed in martensitic steels when a stress is applied to the material during transformation. Classically, the selection phenomenon is modelled considering the work of the shape strain in the applied stress field. This shape ...

2018