Publications associées à Preliminary Study of Distributed Fiber Optic Sensing Technologies in Hydraulic Machinery

Twenty years of irrigation acclimation is driven by denser canopies and not by plasticity in twig- and needle-level hydraulics in a Pinus sylvestris forest

Charlotte Grossiord, Eugénie Isabelle Mas, Christoph Bachofen, Alex Tunas Corzon, Hervé Cochard, Alice Jacqueline Frédérique Gauthey

Climate change is predicted to increase atmospheric vapor pressure deficit, exacerbating soil drought, and thus enhancing tree evaporative demand and mortality. Yet, few studies have addressed the longer-term drought acclimation strategy of trees, particul ...

Oxford Univ Press2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

On the prediction of the induced damage by the start-up sequence of Francis turbines: On operational resilience framework

Christophe Nicolet, Mario Paolone, Martin Seydoux, Elena Vagnoni

The number of transient operations in hydraulic machinery connected to power grid, notably start-ups and shut-downs, has observed a substantial increase in recent decades, primarily driven by the global shift toward intermittent renewable energy sources. S ...

Pergamon-Elsevier Science Ltd2024

Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization

Mario Paolone, Elena Vagnoni, Aldo Leonardo Alerci

Hydropower plants play a crucial role in the power system facing ambitious renewable energy targets. Due to their inherent controllability, they are well suited to provide flexibility to the grid. However, an increased flexibility provision leads to a prol ...

Pergamon-Elsevier Science Ltd2023

Enhancing Flood Resilience: Sediment Management in Le Bez Torrent

Giovanni De Cesare, Azin Amini, Romain Nathan Hippolyte Merlin Van Mol

In the canton of Bern, Switzerland, the “Le Bez” torrent is known for its flash floods, causing sediment and wood debris buildup in Villeret village settled on the alluvial fan. To mitigate this issue, a sediment/wood trap system is being implemented upstr ...

Swiss Academy of Sciences (SCNAT)2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Optimal CAM Computation of Kaplan Turbines Accounting for Wear and Tear Originated by Frequency Control

Sidi-Rachid Cherkaoui, Mario Paolone, Elena Vagnoni, Francesco Gerini

Nowadays, the importance of providing frequency stability to power systems with hydropower units is significantly increasing due to the growing proportion of volatile renewable energy sources. However, the provision of such services, as frequency containme ...

IEEE2021

Third correction of the Rhône River in Switzerland: physical and numerical modelling of the “Martigny bend” priority measure

Giovanni De Cesare, Stéphanie Joëlle André, Azin Amini, Pierre Bourqui, Jean-Noël Saugy, Irene Almeida Samora

The Rhône River, second largest in Switzerland, has already been corrected twice (1863-1893; 1930-1960) to ensure safety and economic development in the Rhône valley. However, in October 2000, the highest flood of the century occurred showing the limitatio ...

International Research Society INTERPRAEVENT2021

Evaluation of a Dynamic Transfer Matrix for a Hydraulic Turbine

François Avellan, Andres Müller, Keita Yamamoto

It is well known that hydraulic machines experience various types of flow instabilities causing a negative influence on the system under off-design operations. The transfer matrix method correlating the flow properties in upstream and downstream of hydraul ...

2020

Suppressing tip-leakage vortex cavitation by overhanging grooves

Mohamed Farhat, Huaiyu Cheng

In the present paper, a new control method for tip-leakage vortex (TLV) cavitation is proposed. This method, which combines the effects of grooves and winglets, is made of overhanging grooves (OHGs) fitted at the tip of a hydrofoil. Experimental and numeri ...

SPRINGER2020

Strain measurement of hydraulic turbine using distributed optical fiber sensor: a preliminary study

Luc Thévenaz, Can Yao, Pingyu Zhu

This paper demonstrates the feasibility and huge potential of applying distributed fiber optic sensing technologies to strain monitoring and failure predictions in hydraulic machinery, validated by a good match between experimental results and theoretical ...

Optical Society of America, 20202020

Bottom pressure characteristics in a stilling basin downstream of a stepped spillway for two different chute slopes

Anton Schleiss, José Pedro Gamito de Saldanha Calado Matos, Michael Pfister, Ivan Stojnic

In the last decades numerous stepped spillways were built, mostly on the downstream face of roller compacted concrete (RCC) dams. Stilling basins are often used as an energy dissipater. Although the hydraulics of stepped chutes was extensively investigated ...

The University of Queensland2020

Physical Mechanism and Flow Control of Tip Vortex Cavitation

Ali Amini

Occurrence of cavitation in hydraulic machines is a challenging issue because it is often accompanied with loss of efficiency, noise emissions, vibrations, and erosion damages. Tip vortices, in particular, are an ideal site for the development of cavitatio ...

EPFL2020

Dynamic behaviour of a Francis turbine during voltage regulation in the electrical power system

François Avellan, Elena Vagnoni

Hydroelectric units can be operated in synchronous condenser mode to provide reactive power to the electrical power system (EPS) for voltage regulation. In this operating mode, the hydraulic turbine consumes active power and in case of hydroelectric units ...

2020

Procedure for predicting part load resonance in Francis turbine hydropower units based on swirl number and local cavitation coefficient similitude

François Avellan, Christophe Nicolet, Christian Landry, Sébastien Alligné, Arthur Tristan Favrel, Loïc Andolfatto

Francis turbines operating at part load conditions develop a cavitation precessing vortex known as a vortex rope in the draft tube cone below the runner outlet. At part load conditions, this vortex precession acts as an excitation source inducing pressure ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2019

On the hysteresis of cavitation incipience and desinence in hydraulic machines

Mohamed Farhat, Martino Reclari, Ali Amini

The omnipresent vortical structures in hydraulic machines are extremely prone to the occurrence of cavitation. It is well known that besides the flow parameters, the incipience, development, and disappearance of cavitation within a vortex is very sensitive ...

IOP PUBLISHING LTD2019