Publications associées à Hollow Cylinder Tests on Boom Clay: Modelling of Strain Localization in the Anisotropic Excavation Damaged Zone

Publications associées (32)

A FEM modelling workflow to simulate THM effects in the rock around nuclear waste packages

High-level waste, stemming from nuclear electricity generation poses significant environmental and safety concerns. Currently, high-level wastes are stored in interim facilities needing constant monitoring and waiting for a definitive solution. Deep geolog ...

EPFL2024

Microbial hydrogen sinks in the sand-bentonite backfill material for the deep geological disposal of radioactive waste

Rizlan Bernier-Latmani, Manon Frutschi, Nicolas Louis Maurice Jacquemin, Simiao Wang, Niels Burzan, Aislinn Ann Boylan, Camille Aude Rolland

The activity of subsurface microorganisms can be harnessed for engineering projects. For instance, the Swiss radioactive waste repository design can take advantage of indigenous microorganisms to tackle the issue of a hydrogen gas (H2) phase pressure build ...

Frontiers Media SA2024

Thermo-hydro-mechanical behaviour of the Callovo-Oxfordian claystone under thermal changes

Héloïse Manon Fuselier

Underground storage of radioactive waste is consensually recognised as the safest storage solution by European and worldwide countries relying mainly or partially on nuclear energy production. Over twenty years of research led by the French national agency ...

EPFL2024

Insights from an extensive triaxial testing campaign on a shale for comparative site characterization of a deep geological repository

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Several boreholes were drilled for site comparison of a deep geological repository (DGR) in Northern Switzerland. The main target of the exploration program was the >100m thick Opalinus Clay, the designated host rock encountered at approximately 450 to 100 ...

Elsevier2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Thermo-hydro-mechanical analysis of the complete lifetime of the bentonite barrier in the FEBEX in-situ test

Lyesse Laloui, Alessio Ferrari, Jose Antonio Bosch Llufriu, Yafei Qiao

The FEBEX test was a large-scale demonstration project for the deep geological disposal concept of nuclear waste involving bentonite seals that lasted 18 years. One of the objectives of the test was to evaluate the capabilities of numerical methods to prov ...

2023

Lattice Green's function method for Atomistic/Continuum coupling

Ankit Gupta

Metal plasticity is an inherently multiscale phenomenon due to the complex long-range field of atomistic dislocations that are the primary mechanism for plastic deformation in metals. Atomistic/Continuum (A/C) coupling methods are computationally efficient ...

EPFL2023

Thermal Conditions in Indoor Environments: Exploring the Reasoning behind Standard-Based Recommendations

Dolaana Khovalyg, Sarah Wael Ahmed Crosby

Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountabili ...

2023

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Learning Transformations To Reduce the Geometric Shift in Object Detection

Mathieu Salzmann, Martin Pierre Engilberge, Vidit Vidit

The performance of modern object detectors drops when the test distribution differs from the training one. Most of the methods that address this focus on object appearance changes caused by, e.g., different illumination conditions, or gaps between syntheti ...

Ieee Computer Soc2023

How I became myself after merging with a computer: Does human-machine symbiosis raise human rights issues?

Marcello Ienca

Novel usages of brain stimulation combined with artificially intelligent (AI) systems promise to address a large range of diseases. These new conjoined technologies, such as brain-computer interfaces (BCI), are increasingly used in experimental and clinica ...

ELSEVIER SCIENCE INC2023

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

Limit on the intergalactic magnetic field from the ultrahigh-energy cosmic ray hotspot in the Perseus-Pisces region

Andrii Neronov, Oleg Kalashev

The Telescope Array Collaboration has reported an evidence for existence of a source of ultrahigh energy cosmic ray events in Perseus-Pisces supercluster. We show that the mere existence of such a source imposes an upper bound on the strength of intergalac ...

American Physical Society2023

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Alessandro Scolaro, Carlo Fiorina, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...

ELSEVIER SCIENCE SA2023

Emergence of robust self-organized undulatory swimming based on local hydrodynamic force sensing

Auke Ijspeert, Kamilo Andres Melo Becerra, Laura Isabel Paez Coy, Robin Thandiackal

Undulatory swimming represents an ideal behavior to investigate locomotion control and the role of the underlying central and peripheral components in the spinal cord. Many vertebrate swimmers have central pattern generators and local pressure-sensitive re ...

AMER ASSOC ADVANCEMENT SCIENCE2021

Is there a difference in how people from different socio-environmental contexts perceive discomfort due to glare from daylight?

Jan Wienold, Clotilde Marie A Pierson

Exposure to daylight has much to offer and should be optimised to maximise its potential. In order to harvest its benefits, any visual discomfort from daylight should be anticipated and minimised. Hence, there is the need to predict discomfort from dayligh ...

2022

Eulerian simulation of complex suspensions and biolocomotion in three dimensions

Yuexia Luna Lin

We present a numerical method specifically designed for simulating three-dimensional fluid-structure interaction (FSI) problems based on the reference map technique (RMT). The RMT is a fully Eulerian FSI numerical method that allows fluids and large-deform ...

National Academy of Sciences2022

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Sense of agency for intracortical brain-machine interfaces

Olaf Blanke, Andrea Serino, Nathan Quentin Faivre, Marco Solcà, Pavo Orepic, Tommaso Enrico Bertoni

Intracortical brain-machine interfaces decode motor commands from neural signals and translate them into actions, enabling movement for paralysed individuals. The subjective sense of agency associated with actions generated via intracortical brain-machine ...

NATURE PORTFOLIO2022

Contact.engineering-Create, analyze and publish digital surface twins from topography measurements across many scales

Till Junge

The optimization of surface finish to improve performance, such as adhesion, friction, wear, fatigue life, or interfacial transport, occurs largely through trial and error, despite significant advancements in the relevant science. There are three central c ...

IOP Publishing Ltd2022