Publications associées à Seismic retrofit of steel tall buildings with bilinear oil dampers

Publications associées (30)

Using automated design appraisal to model building-specific devaluation risk due to land-use change

Uncertainty of spillover effects – including property devaluation - from proposed land-use change elicits opposition to local development. This hinders cities’ ability to implement land-use policy aimed at housing affordability and environmental sustainabi ...

2024

Seismic Assessment and Retrofit of Pre-Northridge High Rise Steel Moment Resisting Frame Buildings with Bilinear Oil Dampers

Dimitrios Lignos

This paper presents quantitative information on the effectiveness of seismic retrofit solutions using bilinear oil dampers for seismically deficient existing tall steel buildings. For this purpose, a benchmark 40-story steel space moment-resisting frame bu ...

MDPI2023

Surrogate modelling for seismic collapse risk assessment of steel moment resisting frames

Dimitrios Lignos, Andronikos Skiadopoulos, Nenad Bijelic

With the overall goal of reducing the numerical burden of uncertainty quantification involved in seismic risk assessments, this paper examines opportunities for assessment of seismic collapse capacity and risk using data-driven surrogates as a complement t ...

2023

The use of ductile steel fuses for the seismic protection of acceleration sensitive non- structural components: Numerical and Experimental verification

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

Recent seismic events have showcased the vulnerability of non-structural components to even low- or moderate-intensity earthquakes that occur far more frequently than design-basis ones. Thus, community-critical buildings, such as hospitals, telecommunicati ...

EEME2023

A fully-coupled highly-parallelized geomechanical simulator for assessing induced seismicity

Jean-François Molinari, Brice Tanguy Alphonse Lecampion, Guillaume Anciaux, Nicolas Richart, Emil Gallyamov

Induced seismicity caused by anthropogenic modification of the subsurface effective stress state has been observed in a number of industrial applications -- from hydrocarbon extraction (e.g., Groningen [1]), drilling waste-water disposal (e.g., [2]) to the ...

2023

Nucleation, propagation, and scale dependence of laboratory frictional ruptures; implications for earthquake mechanics

Federica Paglialunga

Earthquakes are natural phenomena that cause ground shaking and damage to people and infrastructures. Despite significant progress achieved in understanding how earthquakes start, propagate, and arrest, many aspects of their physics and mechanics remain no ...

EPFL2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Florent Alexandre Boudoire, Elias Sebastian Klauser

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

On the symmetries in the dynamics of wide two-layer neural networks

Lénaïc Chizat

We consider the idealized setting of gradient flow on the population risk for infinitely wide two-layer ReLU neural networks (without bias), and study the effect of symmetries on the learned parameters and predictors. We first describe a general class of s ...

AMER INST MATHEMATICAL SCIENCES-AIMS2023

Can one hear the shape of a target zone?

Max-Olivier Hongler

We develop an exchange rate target zone model with finite exit time and non-Gaussian tails. We show how the tails are a consequence of time-varying investor risk aversion, which generates mean-preserving spreads in the fundamental distribution. We solve ex ...

2023

Bayes Security: A Not So Average Metric

Carmela González Troncoso, Giovanni Cherubin

Security system designers favor worst-case security metrics, such as those derived from differential privacy (DP), due to the strong guarantees they provide. On the downside, these guarantees result in a high penalty on the system's performance. In this pa ...

IEEE2023

A probabilistic deformation-based seismic hazard model for Iran

Alireza Khodaverdian

Probabilistic seismic hazard analysis, as the most prevalent approach to evaluate earthquake hazard, is commonly based on earthquake catalogs. Although previous studies show that the recurrence time of large-magnitude (M-w > 7.0) events in Iran is more tha ...

2022

A Probabilistic Physics-Based Seismic Hazard Model for the Alborz Region, Iran

Alireza Khodaverdian

The seismic activity rate is one of the most significant factors in seismic hazard modeling. Although it is usually estimated from observed seismicity, a complete picture of the possible earthquakes is not always available since catalogs of the observed ea ...

SEISMOLOGICAL SOC AMER2022

An Inertial Uni-Axial Interferometer-Based Accelerometer for Harsh Environments

Gerard Aliana Cervera

For high-impact devices, subsequent vibrations have as much influence on the deterioration of the mechanical structure as the impact itself. To mitigate the consequences of both impacts and resulting vibrations, it is crucial to accurately understand the p ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Seismic Design and Behavior of Steel Braced Frame Buildings with Friction Dampers as Dissipative Floor Connectors

Martina Paronesso

Field observations and comprehensive life-cycle building assessment suggest that buildings designed according to today's seismic standards meet the life-safety requirement. However, they are prone to economic losses due to repairs in the aftermath of earth ...

EPFL2022

Steel Sheet Sheathed Cold-Formed Steel Framed In-line Wall Systems. I: Impact of Structural Detailing

Fani Derveni

The North American construction industry has seen substantial growth in the use of cold-formed steel (CFS) framing for midrise buildings in recent years. In seismic zones, CFS-framed buildings utilize shear walls to provide the primary lateral resistance t ...

ASCE-AMER SOC CIVIL ENGINEERS2022

The impact of uncertainties on post-earthquake response predictions of a building with unreinforced masonry walls

Ian Smith, Katrin Beyer, Mathias Christian Haindl Carvallo

In this paper, the impact of several sources of uncertainty on the seismic response of an experimentally tested building is assessed for the case of a post-earthquake scenario. The building comprises unreinforced masonry and reinforced concrete walls. It i ...

2022

Welded moment connections with highly dissipative panel zones for enhanced seismic performance of steel moment frames

Andronikos Skiadopoulos

Research conducted after the 1994 Northridge earthquake in the U.S. and the 1995 Kobe earthquake in Japan led to the development of today's pre-qualified beam-to-column connections for capacity-designed steel moment resisting frames (MRFs). Welded moment c ...

EPFL2022

Historical Development and Seismic Performance of Unreinforced Masonry Buildings with Vertical Extensions in the City Centre of Barcelona

Savvas Saloustros

This paper presents the historical development of the vertical extensions of unreinforced masonry buildings in the Eixample district of Barcelona and their impact on the seismic behaviour. Existing masonry buildings of Eixample present significant seismic ...

TAYLOR & FRANCIS INC2022

Long-term triggered seismicity on the Mosha fault by Damavand volcano, Iran: Implications on the seismic hazard of Tehran metropolis

Seyyedmaalek Momeni

The seismic history of the Mosha fault, the largest and most active fault of Eastern Tehran metropolis, and its relation to the Damavand active volcano, the highest mountain in the Middle East, is investigated. We deduce that the central Mosha, near the Da ...

2022

Seismic response of historical masonry buildings and aggregates - large-scale experimental testing and macro-element modelling

Igor Tomic

The seismic analysis of existing unreinforced masonry buildings is a challenging task, troubled by different sources of material and modelling uncertainties. The historical heritage value of a building can further complicate the assessment and design of re ...

EPFL2022