Publications associées à Quasi-Debye microwave loss as an intrinsic limitation of microwave performance of tunable components based on SrTiO3 and BaxSr1-xTiO3 ferroelectrics

Publications associées (32)

Highly dispersed nanomaterials in polymer matrix via aerosol-jet-based multi-material 3D printing

Polymer-based nanocomposites emerged in the 1960s as a groundbreaking approach to advanced materials. By incorporating robust, durable, and multifunctional nanomaterials into a polymer matrix, the performance of nanocomposites has significantly surpassed t ...

Elsevier2024

The 2024 Magnonics Roadmap

Dirk Grundler, Thomas Yu, Ping Che, Qi Wang

Magnonics is a research field that has gained an increasing interest in both the fundamental and applied sciences in recent years. This field aims to explore and functionalize collective spin excitations in magnetically ordered materials for modern informa ...

2024

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

Automated all-functionals infrared and Raman spectra

Nicola Marzari, Lorenzo Bastonero

Infrared and Raman spectroscopies are ubiquitous techniques employed in many experimental laboratories, thanks to their fast and non-destructive nature able to capture materials' features as spectroscopic fingerprints. Nevertheless, these measurements freq ...

Nature Portfolio2024

Pyroelectricity in poled all-organic polar polynorbornene/polydimethylsiloxane-based stretchable electrets

Frank Nüesch, Francis Owusu

Pyroelectricity in a recently developed all-organic composite electret with a polar polynorbornene-based filler and polydimethylsiloxane (PDMS) matrix has been studied with the help of thermal and dielectric techniques. Measurement of the pyroelectric p co ...

Royal Society of Chemistry2024

Synthesis of polysiloxane elastomers modified with sulfonyl side groups and their electromechanical response

Holger Frauenrath, Yauhen Sheima

Dielectric elastomer transducers are elastic capacitors that respond to mechanical or electrical stress. They can be used in applications such as millimeter-sized soft robots and harvesters of the energy contained in ocean waves. The dielectric component o ...

Royal Society of Chemistry2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Microwave Metalens Antennas

Yuanyan Su

Recently, there has been growing interest in the use of metamaterial (MTM)-based lenses, also known as metalenses, as innovative antenna technology. Increasingly widespread applications of metalenses in modern microwave communication and sensing systems ha ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Breakdown development in a nanosecond pulsed dielectric barrier discharge in humid air in plane-to-plane geometry

Ivo Furno, Xin Yang, Lorenzo Ibba

We used the ns electric field induced second harmonic (EFISH) generation diagnostic to measure the electric field evolution in a 200 ns pulse, dielectric barrier, plane-to-plane discharge in humid air, on the time scale shorter than the laser pulse duratio ...

Iop Publishing Ltd2023

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Zenodo2023

On-Demand Cross-Linkable Bottlebrush Polymers for Voltage- Driven Artificial Muscles

Frank Nüesch, Francis Owusu, Yeerlan Adeli

Dielectric elastomer actuators (DEAs) generate motion resembling natural muscles in reliability, adaptability, elongation, and frequency of operation. They are highly attractive in implantable soft robots or artificial organs. However, many applications of ...

AMER CHEMICAL SOC2023

Electrically tunable dipolar interactions between layer-hybridized excitons

Andras Kis, Fedele Tagarelli, Edoardo Lopriore

Transition-metal dichalcogenide bilayers exhibit a rich exciton landscape including layer-hybridized excitons, i.e. excitons which are of partly intra- and interlayer nature. In this work, we study hybrid exciton-exciton interactions in naturally stacked W ...

ROYAL SOC CHEMISTRY2023

Inflight Microwave Drying Process of Micro-droplets for High Resolution 3D printing

Kwanghoon Choi

A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve the printing resolution for metal additive manufacturing in the frame of the SFA-AM project, Powder Focusing for Beam-Induced Laser 3D Printing. The project aims to transport s ...

EPFL2022

High Permittivity Siloxanes as Promising Materials for Dielectric Elastomer Transducers: From Synthesis to Application

Yauhen Sheima

The speed of change in the modern world is impressive. Within the last 50 years, many devices and technologies have significantly transformed their appearance, intrinsic characteristics and improved their performance. Computers have changed from the size o ...

EPFL2022

Stress effects on the impedance and ferroelectricity of PVDF-BiFeO3-MWCNT films using xanthan gum as dispersant

Frank Nüesch, Francis Owusu

Composite films based on dispersions of bismuth ferrite (BiFeO3) in polyvinylidene fluoride (PVDF) matrixes were prepared in the presence of multiwalled-carbon-nanotubes (MWCNT), using xanthan gum (XG) as dispersant. Films were prepared by spin coating and ...

ELSEVIER SCIENCE SA2022

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond

Holger Frauenrath, Yauhen Sheima

Dielectric elastomers (DEs) are key materials in actuators, sensors, energy harvesters, and stretchable electronics. These devices find applications in important emerging fields such as personalized medicine, renewable energy, and soft robotics. However, e ...

AMER CHEMICAL SOC2022

Slot-Die Coating of an On-the-Shelf Polymer with Increased Dielectric Permittivity for Stack Actuators

Yauhen Sheima

Nitrile-butadiene rubbers (NBR) have been extensively used as dielectric materials due to their commercial availability, excellent mechanical properties, glass transition temperature below 0 degrees C, and increased dielectric permittivity owing to the pre ...

AMER CHEMICAL SOC2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022