Publications associées à Cellular biocomposites from polylactide and microfibrillated cellulose

Publications associées (30)

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

Influence of Fiber Orientation on the Elastic Limit Tensile Stress of UHPFRC

Eugen Brühwiler, Emmanuel Denarié, Jian Zhan

The elastic limit tensile stress of UHPFRC is governed by contributions of the cementitious matrix and the fibrous skeleton. This paper finds that fiber orientation has significant influence on the matrix tensile strength of UHPFRC, while this is not consi ...

2023

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Thomas Keller, Hongwei Zhu

An experimental investigation was conducted on the thermophysical and thermomechanical properties of phenolic-basalt fiber-reinforced polymer (P-BFRP) rebars subjected to high temperature. As a comparison, vinylBFRP (V-BFRP) and epoxy-BFRP (E-BFRP) rebars ...

ELSEVIER SCI LTD2022

Load-bearing hydrogels ionically reinforced through competitive ligand exchanges

Esther Amstad, Matteo Hirsch, Mathias Steinacher, Ran Zhao

Fast advances in soft robotics and tissue engineering demand for new soft materials whose mechanical properties can be interchangeably and locally varied, thereby enabling, for example, the design of soft joints within an integral material. Inspired by nat ...

ROYAL SOC CHEMISTRY2021

In situ photopolymerizable hydrogels for intracranial aneurysms treatment

Oriane Poupart

Intracranial aneurysm is a cerebrovascular disease characterized by an artery dilation in the brain. An aneurysm is prone to rupture, which causes a life-threatening subarachnoid hemorrhage. The major drawbacks of the current treatments, open surgical clip ...

EPFL2021

Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction

Thomas Keller, Anastasios Vassilopoulos, Alireza Farajzadeh Moshtaghin

The aim of this work is the investigation of mesoscale/local variability in mechanical properties of clear timber in the radial direction. Clear Norway spruce wood, Picea abies, was used for cutting specimens of different lengths with a small cross-section ...

2020

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications

Andreas Mortensen, Ludger Weber

In this work, the macrotexture of dense Zn produced by laser powder bed fusion (LPBF) was studied and the mechanical properties for different tensile bar orientations were measured. The compressive strength of LPBF Zn scaffolds with five different unit cel ...

ELSEVIER SCI LTD2020

Microstructural simulation and measurement of elastic modulus evolution of hydrating cement pastes

Karen Scrivener, Cyrille Dunant, Arnaud Charles Albert Muller

Predicting the evolution of stiffness in cement paste requires linking morphological properties of the microstructure to the evolution of mechanical properties. Measures are typically difficult to obtain with sufficient time resolution to capture the trans ...

Pergamon-Elsevier Science Ltd2020

Tensile response of UHPFRC under very low strain rates and low temperatures

Emmanuel Denarié, Mohamed Abdul Hafiz

This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...

Pergamon-Elsevier Science Ltd2020

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

Pergamon-Elsevier Science Ltd2020

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Multi-physical characterization of cellular ceramics for high-temperature applications

Ehsan Rezaei

The use of cellular ceramics in enhancing the performance of a high-temperature latent heat thermal energy storage unit was investigated. A detailed design methodology is presented, which consists of a combined analytical-numerical analysis followed by a m ...

EPFL2020

An analytical inverse analysis to determine equi-biaxial tensile properties of strain-hardening UHPFRC from ring-on-ring test

Eugen Brühwiler, Emmanuel Denarié, Xiujiang Shen

The equi-biaxial tensile properties of strain-hardening UHPFRC are determined and investigated based on an original analytical inverse analysis of results from ring-on-ring tests. First, the analytical inverse analysis method is developed based on the elas ...

2020

Surface textures suppress viscoelastic braking on soft substrates

Martin Louis Francis Coux, John Martin Kolinski

A gravity-driven droplet will rapidly flow down an inclined substrate, resisted only by stresses inside the liquid. If the substrate is compliant, with an elastic modulus G < 100 kPa, the droplet will markedly slow as a consequence of viscoelastic braking. ...

National Academy of Sciences2020

Experimental Assessment of the Impact of Partial Saturation On the Mechanical Properties of Gas Shales

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

The impact of partial water saturation on the mechanical behaviour of clays and claystones has been widely proved. This work aims at demonstrating that also for gas shales partial water saturation has a significant influ-ence on their stiffness and strengt ...

2019

Shear to elastic modulus ratio in unreinforced masonry

Katrin Beyer, Bastian Valentin Wilding, Michele Godio

In the seismic design of unreinforced masonry walls, the elastic modulus E and shear modulus G are essential parameters for the calculation of the in-plane wall stiffness. Current codes provide empirical estimates of the elastic modulus and furthermore a r ...

2019

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Nicolas Candau, Oguzhan Oguz

Circumventing inherent embrittlement, poor heat resistance, and melt elasticity of poly(lactic acid) (PLA) without compromising its remarkable stiffness and strength has become a particular challenge in polymer science due to increasing demand for green ma ...

AMER CHEMICAL SOC2019

Stress mitigation for adhesively bonded photovoltaics with fibre reinforced polymer composites in load carrying applications

Thomas Keller, Yu Bai

Structural loads, especially in-plane compression, may cause local buckling and debonding of the photovoltaic (PV) cells that are mechanically integrated with structural members and this may lead to degradation in their electrical performance. This paper p ...

ELSEVIER SCI LTD2019