Publications associées à Architectural Modeling of a Multi-Tone/Single-Sideband Serial Link Transceiver for Lossy Wireline Data Links

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Ultra-Low Power Short-Range 60-GHz FMCW Radar Front-End

Sammy Cerida Rengifo

The millimeter wave (mmWave) frequency band is becoming very interesting over the past years because it provides the opportunity to operate using large bandwidths which are not available at lower frequencies. This enables new communication standards suppor ...

EPFL2023

DChannel: Accelerating Mobile ApplicationsWith Parallel High-bandwidth and Low-latency Channels

Haitham Al Hassanieh

Interactive mobile applications like web browsing and gaming are known to benefit significantly from low latency networking, as applications communicate with cloud servers and other users' devices. Emerging mobile channel standards have not met these needs ...

USENIX ASSOC2023

A Low-Complexity LoRa Synchronization Algorithm Robust to Sampling Time Offsets

Orion Afisiadis, Mathieu Pierre Xhonneux

LoRaWAN is nowadays one of the most popular protocols for low-power Internet of Things communications. Although its physical layer, namely LoRa, has been thoroughly studied in the literature, aspects related to the synchronization of LoRa receivers have re ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Maximum-Likelihood-Based Two-User Receiver for LoRa Chirp Spread-Spectrum Modulation

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Orion Afisiadis, Joachim Tobias Tapparel, Mathieu Pierre Xhonneux

Long Range (LoRa) is an emerging low-power wide-area network technology offering long-range wireless connectivity to Internet of Things (IoT) devices. For energy efficiency reasons, LoRa end nodes implement a nonslotted ALOHA multiple access scheme to tran ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Millimeter-wave to near-terahertz sensors based on reversible insulator-to-metal phase transition in Vanadium dioxide

Fatemeh Qaderi Rahaqi

Millimeter-wave (mm-wave) and terahertz (THz) detection has opened a significant research direction in imaging, sensing, spectroscopy, and ultrafast wireless communication. The sensitivity of the phase transition to electromagnetic waves in Vanadium dioxid ...

EPFL2022

Gigahertz free-space electro-optic modulators based on Mie resonances

Ileana-Cristina Benea-Chelmus, Sydney Rebecca Mason

Electro-optic modulators are essential for sensing, metrology and telecommunications. Most target fiber applications. Instead, metasurface-based architectures that modulate free-space light at gigahertz (GHz) speeds can boost flat optics technology by micr ...

Nature Portfolio2022

Spike-Based Sensing and Communication for Highly Energy-Efficient Sensor Edge Nodes

Mihai Adrian Ionescu, Teodor Rosca

Highly energy-efficient wireless sensor nodes are a prerequisite for a sustainable operation of the Internet of things. Therefore, classical approaches for system design based on digital signal processing are not a viable solution, but system design has to ...

IEEE2022

Energy-Efficient Design Techniques for High-Speed Wireline Serial Links

Firat Çelik

The exponential growth in computing power and multimedia services has caused a tremendous increase in data traffic in recent years. This increase in data traffic brings a strong demand for data bandwidth of electrical input/output (I/O) links and pushes th ...

EPFL2021

High-Speed ADC Design and Optimization for Wireline Links

Ayça Akkaya

The ever-growing global internet traffic has increased demand for higher speed data transmission. As the bandwidth requirements of wireline links increase, extensive digital equalization techniques are required to compensate for the high-frequency channel ...

EPFL2021

Enhancing the Reliability of Dense LoRaWAN Networks With Multi-User Receivers

Andreas Peter Burg, Joachim Tobias Tapparel, Mathieu Pierre Xhonneux

LoRaWAN is a low-power wireless technology that provides long-range connectivity to battery-powered Internet of Things (IoT) devices. To minimize the energy consumption of the IoT nodes, LoRaWAN networks use for the uplink a pure non-slotted ALOHA multiple ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

High speed, complex wavefront shaping using the digital micro-mirror device

Demetri Psaltis, Ahmed Ayoub

Digital micro-mirror devices (DMDs) have been deployed in many optical applications. As compared to spatial light modulators (SLMs), they are characterized by their much faster refresh rates (full-frame refresh rates up to 32 kHz for binary patterns) compa ...

Nature Portfolio2021

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani, Furkan Karakaya

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

A 32 Gb/s PAM-16 TX and ADC-Based RX AFE with 2-tap embedded analog FFE in 28 nm FDSOI

Yusuf Leblebici, Ayça Akkaya, Firat Çelik

This paper presents a 32 Gb/s 16-level pulse amplitude modulation (PAM-16) source-series-terminated transmitter (TX) and a receiver (RX) analog front-end (AFE) in 28 nm FDSOI. The 8-way time-interleaved successive-approximation register (SAR) analog-to-dig ...

2021

Unconventional time-bandwidth performance of resonant cavities with nonreciprocal coupling

Camille Sophie Brès, Davide Grassani, Ivan Cardea, Kosmas Tsakmakidis

The time-bandwidth limit is a mathematical tenet that affects all reciprocal resonators, stating that the product of the spectral bandwidth that can couple into a resonant system and its characteristic energy decay time is always equal to 1. Here, we devel ...

2021

Low-Latency High-Bandwidth Circuit and System Design for Trigger Systems in High Energy Physics

Marcos Vinícius Silva Oliveira

The increasing luminosity in HEP (High Energy Physics) colliders demands trigger systems to be more selective. First, more information from the detector is routed to the trigger system. Second, larger parts of this information are processed together. These ...

EPFL2021

Physical Layer Aspects of LoRa and Full-Duplex Wireless Transceivers

Orion Afisiadis

Wireless communications are currently faced with two main challenges. The first challenge stems from the enormous number of Internet of Things (IoT) devices that transmit very small amounts of data. The second challenge is the need for ever-increasing data ...

EPFL2020

Kramers Kronig detection of four 20 Gbaud 16-QAM channels using Kerr combs for a shared phase estimation

Tobias Kippenberg, Martin Hubert Peter Pfeiffer, Fatemeh Alishahi, Arne Kordts, Maxim Karpov, Ahmad Fallahpour

We experimentally demonstrate Kramers-Kronig detection of four 20 Gbaud 16-quadrature-amplitude-modulated (QAM) channels after 50 km fiber transmission using two soliton Kerr combs as signal sources and local oscillators. The estimated carrier phase at the ...

OPTICAL SOC AMER2020

Arbitrarily high time bandwidth performance in a nonreciprocal optical resonator with broken time invariance

Camille Sophie Brès, Hatice Altug, Davide Grassani, Simon Julien Fabbri, Ivan Cardea, Kosmas Tsakmakidis

Most present-day resonant systems, throughout physics and engineering, are characterized by a strict time-reversal symmetry between the rates of energy coupled in and out of the system, which leads to a trade-off between how long a wave can be stored in th ...

Nature Research2020

Comprehensive Spectral Analysis of PWM Waveforms With Compensated DC link Oscillations

Drazen Dujic, Stefan Milovanovic

In the available literature, including reference books on the topic, the spectral analysis of voltage waveforms obtained through the use of pulse-width modulation relies on the assumption of an ideally flat voltage across the DC link of a considered switch ...

2020