Publications associées à Mechanical reinforcement of granular hydrogels

Publications associées (33)

Bioprinting of piezoresistive organohydrogel networks for advanced real-time mechanosensing in engineered tissue models

Understanding biomechanics in 3D cell culture is key to advancing tissue engineering, yet integrating real-time sensing into soft tissues remains a challenge. We developed a stretchable, piezoresistive hydrogel by combining PEDOT:PSS with a polyvinyl alcoh ...

2025

Towards edible robots and robotic food

Dario Floreano, Jun Shintake, Bokeon Kwak, Markéta Pankhurst

Edible robots and robotic food — edible systems that perceive, process and act upon stimulation — could open a new range of opportunities in health care, environmental management and the promotion of healthier eating habits. For example, they could enable ...

2024

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Paul Joseph Dyson, Xinbang Wu, Mingyang Liu

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a su ...

Nature Portfolio2024

Parametric Reduced Order Model of a Gas Bearings Supported Rotor

Jürg Alexander Schiffmann, Fabio Nobile, Dimitri Maurice Goutaudier

Gas bearings use pressurized gas as a lubricant to support and guide rotating machinery. These bearings have a number of advantages over traditional lubricated bearings, including higher efficiency in a variety of applications and reduced maintenance requi ...

2023

Localized Ionic Reinforcement of Double Network Granular Hydrogels

Esther Amstad, Alexandra Thoma

Nature produces soft materials with fascinating combinations of mechanical properties. For example, the mussel byssus embodies a combination of stiffness and toughness, a feature that is unmatched by synthetic hydrogels. Key to enabling these excellent mec ...

Wiley-V C H Verlag Gmbh2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

Biodegradable and printed chipless environmental sensors for sustainable Internet-of-Things applications

James Alec Pierce Bourely

The rapid expansion of the Internet of Things (IoT) and its integration across various industries is contributing to the significant increase in electronic waste (e-waste), posing serious environmental and sustainability challenges. This thesis addresses t ...

EPFL2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

A large part of building demolitions is motivated by purely socio-economic reasons. Hence, about-to-be-demolished structures, commonly made of reinforced concrete, very often present no or little degradation. When adaptive reuse of the entire building is n ...

2024

Decision support methodology for waste-to-value process integration

Rafael Amorim Leandro De Castro Amoedo

Waste treatment is a complex procedure that comprises multidimensional aspects. The challenges posed by the energy transition and international protocols emphasize the role of waste in its material and energy dimension. With an increasing population and li ...

EPFL2023

3D deep learning for enhanced atom probe tomography analysis of nanoscale microstructures

Ye Wei

Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineer ...

2024

Reuse of cut concrete slabs in new buildings for circular ultra-low-carbon floor designs

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

The study explores an original idea that responds to the urgent need to reduce the detrimental environmental impacts of load-bearing floor construction in new buildings by reusing saw-cut reinforced concrete (RC) pieces salvaged from soon-to-be demolished ...

2024

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel " fruto-Fenton " process, effective over a wide pH range (4-9)

César Pulgarin, Stefanos Giannakis, Aline Laetitia Schaub

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared wi ...

Pergamon-Elsevier Science Ltd2024

Multiscale Spatiotemporal Characterization of Embodied Environmental Performance of Building Structures in Geneva from 1850 to 2018

Corentin Jean Dominique Fivet, Catherine Elvire L. De Wolf

Load-bearing systems in buildings, significant in material use and embodied greenhouse gas emissions (EGHGE), have lacked detailed analysis on their environmental and functional relationships over time and space. This study evaluates the environmental impa ...

2024

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Complexity of crack front geometry enhances toughness of brittle solids

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

Brittle solids typically fail by growth and propagation of a crack from a surface flaw. This process is modelled using linear elastic fracture mechanics, which parameterizes the toughness of a material by the critical stress intensity factor, or the prefac ...

NATURE PORTFOLIO2024

On the role of system integration in plastic waste management

François Maréchal, Ivan Daniel Kantor, Julia Granacher

The management of plastic waste is a growing concern that can harm wildlife and ecosystems, and its end-of-life policies are key to mitigating plastic environmental impact. This work presents a decision-making methodology for the thermal and material valor ...

Elsevier2023

Additive Manufacturing of Bioinspired Mineral-Based Composites

Ran Zhao

Biominerals are used by natural organisms for example as structural supports and optical sensors. They are produced from a limited number of elements and under ambient conditions. Nevertheless, they often possess excellent mechanical properties and sometim ...

EPFL2024