Publications associées à Suppressing tip vortex cavitation by winglets

Publications associées (29)

Data from: Optimal blade pitch control for enhanced vertical-axis wind turbine performance

Karen Ann J Mulleners, Sébastien Le Fouest

This directory contains open-source data obtained using a single-bladed H-type vertical-axis wind turbine prototype with individual blade pitching. This data results from the optimisation of the blade's pitching kinematics using a genetic algorithm at two ...

Zenodo2024

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Vortex shedding from a composite hydrofoil: Experimental evidence of a novel "partial lock-in"

Thomas Antoine Nicolas Berger, Mohamed Farhat

Lock-in is of great importance in many engineering applications due to its practical implications for structural safety. The influence of composite bend-twist coupling on the wake dynamics and vortex-induced vibration around a carbon fiber composite hydrof ...

Aip Publishing2023

Growth, timing, & trajectory of vortices behind a rotating plate

Diego Francescangeli

The presence of aerodynamic vortices is widespread in nature. They can be found at small scales near the wing tip of flying insects or at bigger scale in the form of hurricanes, cyclones or even galaxies. They are identified as coherent regions of high vor ...

EPFL2022

To tread or not to tread: comparison between water treading and conventional flapping wing kinematics

Karen Ann J Mulleners, Alexander Gehrke, Swathi Badala Krishna

Hovering insects are limited by their physiology and need to rotate their wings at the end of each back-and-forth motion to keep the wing's leading edge ahead of its trailing edge. The wing rotation at the end of each half-stroke pushes the leading edge vo ...

IOP Publishing Ltd2022

Lagrangian analysis of bio-inspired vortex ring formation

Karen Ann J Mulleners, Mrudhula Baskaran

Pulsatile jet propulsion is a highly energy-efficient swimming mode used by various species of aquatic animals that continues to inspire engineers of underwater vehicles. Here, we present a bio-inspired jet propulsor that combines the flexible hull of a je ...

2022

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

Sharp turning maneuvers with avian-inspired wing and tail morphing

Dario Floreano, Valentin Wüest, Enrico Ajanic

Flight in dense environments, such as forests and cities requires drones to perform sharp turns. Although fixed-wing drones are aerodynamically and energetically more efficient than multicopters, they require a comparatively larger area to turn and thus ar ...

2022

An experimental study on the upper part-load elliptical vortex instability in a Francis turbine

François Avellan, Elena Vagnoni, Andres Müller, Arthur Tristan Favrel, Ali Amini

This paper presents preliminary results of an experimental study on the occurrence and development of the upper part-load instability in a reduced-scale Francis turbine. The study includes draft tube pressure measurements, high-speed flow visualization, an ...

IOP Publishing2021

Phenomenology and scaling of optimal flapping wing kinematics

Karen Ann J Mulleners, Alexander Gehrke

Biological flapping wing fliers operate efficiently and robustly in a wide range of flight conditions and are a great source of inspiration to engineers. The unsteady aerodynamics of flapping wing flight are dominated by large-scale vortical structures tha ...

IOP PUBLISHING LTD2021

Effects of leading-edge separation on the vortex-induced vibration of an elongated bluff body

Guiyue Duan

Wind-tunnel experiments were conducted to investigate the effects of leading-edge separation on the vortex-induced vibration (VIV) of an elastically-supported elongated bluff body. Solid wind barriers of various heights were fixed in the leading edge to ad ...

ELSEVIER2021

Scaling of the translational velocity of vortex rings behind conical objects

Karen Ann J Mulleners, Guillaume de Guyon-Crozier

Ring vortices are efficient at transporting fluid across long distances. They can be found in nature in various ways: they propel squids, inject blood in the heart, and entertain dolphins. These vortices are generally produced by ejecting a volume of fluid ...

2021

The dynamics and timescales of static stall

Karen Ann J Mulleners, Sébastien Le Fouest, Julien Dominique Claude Deparday

Airfoil stall plays a central role in the design of safe and efficient lifting surfaces. We typically distinguish between static and dynamic stall based on the unsteady rate of change of an airfoil’s angle of attack. Despite the somewhat misleading denotat ...

2021

Homogenization-based design of microstructured membranes: wake flows past permeable shells

François Gallaire, Edouard Boujo, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna

A formal framework to characterize and control/optimize the flow past permeable membranes by means of a homogenization approach is proposed and applied to the wake flow past a permeable cylindrical shell. From a macroscopic viewpoint, a Navier-like effecti ...

Cambridge University Press2021

Physical Mechanism and Flow Control of Tip Vortex Cavitation

Ali Amini

Occurrence of cavitation in hydraulic machines is a challenging issue because it is often accompanied with loss of efficiency, noise emissions, vibrations, and erosion damages. Tip vortices, in particular, are an ideal site for the development of cavitatio ...

EPFL2020

Dynamic stall on an airfoil undergoing VAWT blade angle of attack variations

Karen Ann J Mulleners, Sébastien Le Fouest, Sabrina Henne

Vertical axis wind turbines have several attractive features in the context of energy production in urban areas, but the inherent aerodynamic complexity of the flow around them has challenged their development on a larger scale. They generally operate at l ...

2020

A point vortex transportation model for yawed wind turbine wakes

Fernando Porté Agel, Haohua Zong

In this study, stereo particle imaging velocimetry measurements are performed at multiple streamwise locations behind a yawed wind turbine to reveal the formation mechanisms of the counter-rotating vortex pair (CVP), and a point vortex transportation (PVT) ...

Cambridge University Press2020

Large eddy simulation of the tip-leakage cavitating flow with an insight on how cavitation influences vorticity and turbulence

Mohamed Farhat

Cavitation within a tip leakage flow remains a challenging issue in a variety of axial hydraulic machines. It is still not possible nowadays to predict cavitation occurrence in such a flow with acceptable accuracy. In the present study, we have carried out ...

ELSEVIER SCIENCE INC2020

Mitigating tip vortex cavitation by a flexible trailing thread

Mohamed Farhat, Ali Amini

Tip Vortex Cavitation (TVC) is a major issue in design and operation of axial hydraulic machines. We investigate the capacity of a flexible trailing thread in alleviating TVC by analyzing the flow-induced motion. For this purpose, a nylon thread with three ...

AMER INST PHYSICS2019

Roll-up region of tip vortex: numerical investigation

Mohamed Farhat, Azin Amini, Matthieu Dreyer, Ali Amini, Martino Reclari

The appearance of gas-filled vortices at the tip of hydraulic machines blades is usually associated with increase of losses, vibrations, noise and erosion risk. The understanding of the roll-up region, where the boundary layer on the pressure side crosses ...

IOP Publishing2019