Publications associées à Eutectic melts

Publications associées (32)

Unmoderated molten salt reactors design optimisation for power stability

The critical region of unmoderated molten salt reactors consists in a cavity filled with a liquid fuel. The lack of internal structure implies a complex flow structure of the circulating fuel salt. A preliminary core shape optimization has been performed d ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Improved methodology for analysis and design of Molten Salt Reactors

Rodrigo Gonzalez Gonzaga De Oliveira

Molten Salt Reactors is a class of advanced reactors that is typically characterised by the presence of a molten inorganic salt of a fissile material as fuel. At the moment, this class of reactors is considered one of the promising options in the long run ...

EPFL2021

Monocarborane cluster as a stable fluorine-free calcium battery electrolyte

Andreas Züttel, Kun Zhao

High-energy-density and low-cost calcium (Ca) batteries have been proposed as 'beyond-Li-ion' electrochemical energy storage devices. However, they have seen limited progress due to challenges associated with developing electrolytes showing reductive/oxida ...

Nature Portfolio2021

Decreasing the Stability of Borohydride with Ionic Liquids for Hydrogen Storage and Carbon Dioxide Conversion

Loris Giovanni Lombardo

The world needs to move from a fossil fuel to a renewable energy based society. With the increasing electricity production from wind and PV, short and long term energy storage are becoming one of challenge of the 21st century. While batteries are the prefe ...

EPFL2021

Promoting Persistent Superionic Conductivity in Sodium Monocarba-closo-dodecaborate NaCB11H12 via Confinement within Nanoporous Silica

Mirjana Dimitrievska

Superionic phases of bulk anhydrous salts based on large cluster-like polyhedral (carba)borate anions are generally stable only well above room temperature, rendering them unsuitable as solid-state electrolytes in energy-storage devices that typically oper ...

AMER CHEMICAL SOC2021

The Solvent Effect on H2O2 Generation at Room Temperature Ionic Liquid|Water Interface

Hubert Girault

H2O2 is a versatile chemical and can be generated by the oxygen reduction reaction (ORR) in proton donor solution in molecular solvents or room temperature ionic liquids (IL). We investigated this reaction at interfaces formed by eleven hydrophobic ILs and ...

2021

The solubility parameters of carbon dioxide and ionic liquids: Are they an enigma?

Vassily Hatzimanikatis

In a recent article entitled "Solubility Parameter of Carbon Dioxide-an Enigma"[1], Marcus reported the literature values for the solubility parameter of liquid carbon dioxide (CO2) at 298 K with discrepancies as large as 200%. An analogous article on ioni ...

ELSEVIER2021

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Nanocapillary confinement of imidazolium based ionic liquids

Aleksandra Radenovic, Sanjin Marion, Sebastian James Davis

Room temperature ionic liquids are salts which are molten at or around room temperature without any added solvent or solution. In bulk they exhibit glass like dependence of conductivity with temperature as well as coupling of structural and transport prope ...

2020

A polymeric ionic liquid catalyst for the N-formylation and N-methylation of amines using CO2/PhSiH3

Paul Joseph Dyson, Andreas Züttel, Zhaofu Fei, Kyriakos Stylianou, Arunraj Chidambaram, Aswin Gopakumar, Dmitry Vasilyev, Serhii Shyshkanov

We describe a polymeric ionic liquid (PIL) derived from trimethyl(p-vinylbenzyl)ammonium chloride ([VBTAm]Cl) that efficiently catalyzes the N-formylation of amines employing CO2 and PhSiH3 at room temperature with low catalyst loadings in near-quantitativ ...

2020

Buoyancy-driven melting and solidification heat transfer analysis in encapsulated phase change materials

Sophia Haussener, Nithin Mallya

Controlled melting and solidification in encapsulated phase change materials (PCMs) is of practical interest, for example, in latent heat storage applications. The choice of PCMs and the dynamic heat transfer characteristics during phase change - affecting ...

2021

Anion Selection Criteria for Water-in-Salt Electrolytes

Maximilian Becker, Corsin Battaglia, David Reber

Water-in-salt electrolytes have enabled the development of novel high-voltage aqueous lithium-ion batteries. This study explores the reasons why analogous sodium electrolytes have struggled to reach the same level of electrochemical stability. Solution str ...

WILEY-V C H VERLAG GMBH2020

Dynamic wetting in pressure-infiltration of ceramic particle preforms by molten metal

Gionata Schneider

This thesis investigates the interaction between mechanically induced flow of a liquid metal into a porous solid, and kinetic effects at the triple line. The approach is experimental and focuses on metal-ceramic systems for which the literature gives value ...

EPFL2019

Breed-and-burn fuel cycle in molten salt reactors

Andreas Pautz, Boris Aviv Hombourger

The operation of a reactor on an open but self-sustainable cycle without actinide separation is known as breed-and-burn. It has mostly been envisioned for use in solid-fueled fast-spectrum reactors such as sodium-cooled fast reactors. In this paper the app ...

EDP Sciences2019

Preparation of high-conductivity, high-capacity phase change media capsules with enhanced thermos-chemical stability in thermal energy storage applications

Selmar Rudolf Binder

Thermal energy storage using the effects of the latent heat in the solid-liquid phase transformation has found its way into every day applications. Reusable, organic phase change media stabilize low temperatures of parcels, and salt/water tanks act as buff ...

EPFL2019

Cfd-Based Correlation For Forced Convection Heat Transfer In Circular Ducts Of Internally Heated Molten Salts

Carlo Fiorina

Heat transfer phenomena involving internally heated fluid flows are of particular interest in several industrial applications, in chemical plants as in the nuclear field. This topic is relevant for the development of the Molten Salt Reactors (MSRs) since i ...

AMER SOC MECHANICAL ENGINEERS2018

Defect chemistry of methylammonium lead iodide

Alessandro Senocrate

The present work deals with the defect chemistry and charge transport properties in halide perovskites, and in particular in the archetypal methylammonium lead iodide. These materials are extensively researched due to their very promising application as li ...

EPFL2018

Intricacies of Cation-Anion Combinations in Imidazolium Salt-Catalyzed Cycloaddition of CO2 Into Epoxides

Paul Joseph Dyson, Gabor Laurenczy, Felix Daniel Bobbink, Martin Hulla, Dmitry Vasilyev, Florent Menoud

The cycloaddition of CO2 into epoxides catalyzed by imidazolium and related salts continues to attract attention due to the industrial importance of the cyclic carbonate products. The mechanism of the imidazolium-catalyzed transformation has been proposed ...

2018

Lattice Energy as Emerging General Parameter Describing Ionic Organic Semiconducting Materials Properties

Donatas Gesevicius

Cyanine dyes represent a class of ionic functional materials used by a broad heterogeneous science community contain-ing biologists, chemists, physicists and materials scientists. Their diverse application opportunities are ranging from fluorescence marker ...

EPFL2018

Solar-driven reduction of CO₂ : from homogeneous to heterogeneous catalytic systems

Marcel Roland Schreier

Rapidly increasing levels of atmospheric carbon dioxide and their damaging impact on the global climate system raise doubts about the sustainability of the fossil resource based energy system. Meanwhile, raising living standards and increasing global popul ...

EPFL2017