Publications associées à Insights into the thermo-mechanics of orthogonal nanometric machining

Publications associées (27)

TSLAM: a tag-based object-centered monocular navigation system for augmented manual woodworking

Yves Weinand, Julien Gamerro, Andrea Settimi, Hong-Bin Yang

TimberSLAM (TSLAM) is an object-centered, tag-based visual self-localization and mapping (SLAM) system for monocular RGB cameras. It was specifically developed to support a robust and augmented reality pipeline for close-range, noisy, and cluttered fabrica ...

2024

Metasurface-Enhanced Infrared Spectroscopy: An Abundance of Materials and Functionalities

Hatice Altug, Andreas Tittl, Aurélian Michel John-Herpin, Felix Ulrich Brikh

Infrared spectroscopy provides unique information on the composition and dynamics of biochemical systems by resolving the characteristic absorption fingerprints of their constituent molecules. Based on this inherent chemical specificity and the capability ...

Wiley-V C H Verlag Gmbh2023

Integrated electronics for time-of-flight positron emission tomography photodetectors

Andrada Alexandra Muntean

Positron emission tomography is a nuclear imaging technique well known for its use in oncology for cancer diagnosis and staging. A PET scanner is a complex machine which comprises photodetectors placed in a ring configuration that detect gamma photons gen ...

EPFL2023

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

Xabier Sarasola Martin

The European Roadmap to Fusion Electricity (Federici et al., 2018) [1] details the path to complete within the next three decades the DEMOnstration power plant, DEMO, aiming to a net gain of Energy Q=40. The 2018 DEMO baseline considers a 2 GW tokamak devi ...

2023

Leibniz en Créateur. Un regard matériel sur sa machine à calculer

Simon François Dumas Primbault

Between 1671 and 1716, the German mathematician Gottfried Wilhelm Leibniz attempted to design a reckoning machine. Working closely with the Parisian clockmaker Monsieur Ollivier, Leibniz eventually failed at producing a working prototype. After the redisco ...

2022

Development of a large-area, light-weight module using the MALTA monolithic pixel detector

Edoardo Charbon, Francesco Piro

The MALTA pixel chip is a 2 cm x 2 cm large monolithic pixel detector developed in the Tower 180 nm imaging process. The chip contains four CMOS transceiver blocks at its sides which allow chip-to-chip data transfer. The power pads are located mainly at th ...

ELSEVIER2022

Dual-function artificial molecular motors performing rotation and photoluminescence

Lukas Pfeifer

Molecular machines have caused one of the greatest paradigm shifts in chemistry, and by powering artificial mechanical molecular systems and enabling autonomous motion, they are expected to be at the heart of exciting new technologies. One of the biggest c ...

AMER ASSOC ADVANCEMENT SCIENCE2022

Two-phase and oil-free co-rotating scroll compressor/expander

Jürg Alexander Schiffmann

This paper discusses experimental and theoretical investigations about a re-designed co-rotation scroll machine, operating in compressor and expander mode. The machine has been tested under various operational conditions, with the aim to determine the infl ...

2019

Thermal and Voltage-Aware Performance Management of 3D MPSoCs with Flow Cell Arrays and Integrated SC Converters

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Alexandre Sébastien Julien Levisse, Halima Najibi

Flow cell arrays (FCAs) concurrently provide efficient on-chip liquid cooling and electrochemical power generation. This technology is especially promising for three-dimensional multi-processor systems-on-chip (3D MPSoCs) realized in deeply scaled technolo ...

2022

Very-High-Speed Miniaturized Permanent Magnet Motors: Design and Optimization

Yves Perriard, Guillaume Paul-André Burnand

This paper aims to present an optimization method for very-high-speed electrical machines based on multiphysical analytical models. Analytical models allow a fast design but have to be robust and reliable. The set of models presented is very complete and c ...

IEEE2019

Learning-Based Hardware Design for Data Acquisition Systems

Cosimo Aprile

This multidisciplinary research work aims to investigate the optimized information extraction from signals or data volumes and to develop tailored hardware implementations that trade-off the complexity of data acquisition with that of data processing, conc ...

EPFL2018

Impact of Lanthanide Nanomaterials on Photonic Devices and Smart Applications

Jean-Claude Bünzli

Half a century after its initial emergence, lanthanide photonics is facing a profound remodeling induced by the upsurge of nanomaterials. Lanthanide-doped nanomaterials hold promise for bioapplications and photonic devices because they ally the unmatched a ...

WILEY-V C H VERLAG GMBH2018

Placement of Virtual Containers on NUMA systems: A Practical and Comprehensive Model

Baptiste Joseph Eustache Lepers

Our work addresses the problem of placement of threads, or virtual cores, onto physical cores in a multicore NUMA system. Different placements result in varying degrees of contention for shared resources, so choosing the right placement can have a large ef ...

USENIX ASSOC2018

Out-of-plane instability of thin reinforced concrete walls under seismic loading

Angelica Rosso

Out of plane instability of reinforced concrete walls is a failure mechanism observed rather recently following the earthquakes in Chile (2010) and New Zealand (2011). Global out of plane instability is a phenomenon that may occur in thin walls, subjected ...

EPFL2018

Static and Dynamic Self-Assembly of Pearl-Like-Chains of Magnetic Colloids Confined at Fluid Interfaces

Ignacio Pagonabarraga Mora

Magnetic colloids adsorbed at a fluid interface are unique model systems to understand self-assembly in confined environments, both in equilibrium and out of equilibrium, with important potential applications. In this work the pearl-chain-like self-assembl ...

2021

Design Methodology for Constructing Multimaterial Origami Robots and Machines

Jamie Paik, Zhenishbek Zhakypov

Robotic origami allows rapid prototyping of intelligent robots and machines constructed from thin sheets of functional materials. Multimaterial-based design freedom of origami robots creates functional versatility; however, the design parameters pose chall ...

2018

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Development of soft microscopic implants and acoustically-powered machines for biomedical applications

Murat Kaynak

The development of miniaturized machines that can actively cross barriers, navigate through heterogeneous materials and access remote sites can revolutionize environmental inspection and targeted therapy. Seminal work demonstrated the feasibility of follow ...

EPFL2021

Modular and reconfigurable desktop microfactory for high precision manufacturing

Zhenishbek Zhakypov

Sub-millimeter scale devices are developing rapidly taking smaller, smarter, and more precise forms. This is achieved thanks to advancements in micro-manufacturing tools and techniques. For micro-production, a miniaturization of the machinery is a prominen ...

Springer London Ltd2017

Stereolithography-Based Antennas for Satellite Communications in Ka-Band

Juan Ramon Mosig, Tomislav Debogovic, Maria Garcia Vigueras, Joana Rita Alves dos Santos Silva

This paper illustrates the role of additive manufacturing (AM) as enabling technology to realize high-performance low-cost antennas for Ka-band applications. In addition to the inherent electromagnetic challenges implicit in the conception of such complex ...

Ieee-Inst Electrical Electronics Engineers Inc2017