Publications associées à Accurate Software Tool for the Prediction of RF Breakdown in Microstrip Transmission Lines

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, Xavier Aeby, James Alec Pierce Bourely, Jaemin Kim, Oleksandr Vorobyov

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...

IEEE2022

Sommerfeld Integrals and Their Relation to the Development of Planar Microwave Devices

Krzysztof Michalski, Juan Ramon Mosig

This paper deals with the mathematical expressions called Sommerfeld integrals. Introduced by A. Sommerfeld in 1909, they are mathematically equivalent to inverse Hankel transforms. The original historical goal of these integrals was to provide an accurate ...

Ieee-Inst Electrical Electronics Engineers Inc2021

Two-Element Antenna-Active Phase Shifter Packaging at 77 GHz

Anja Skrivervik, Efe Öztürk

This work presents a low cost and wire-bonded active phase shifter chip to RF circuitry on PCB board packaging for implementing a two-element phased array antenna at 77 GHz. The 1.5 mm × 1.1 mm chip is embedded in RO3003 PCB board and its GSG ports are wir ...

IEEE2019

Broadbeam microstrip patch antenna using higher order modes

Anja Skrivervik, Ismael Vico Triviño

The aim of this contribution is to assess the potential of using various microstrip radiating elements excited with different modes to achieve wide pattern beamwidths. The proposed antenna is made in classic microstrip technology and consists of a circular ...

The European Association on Antennas and Propagation (EurAAP)2019

Extension of the Unmatched-Media Time Reversal Method to Locate Soft Faults in Transmission Lines

Mario Paolone

An alternative method based on time reversal to locate solid faults in transmission line networks was recently proposed by Codino et al. in the paper “An alternative method for locating faults in transmission line networks based on time reversal” (IEEE Tra ...

2018

Compact Microstrip Feedings with an Elevated Ground Plane for Thick Folded SIW

Juan Ramon Mosig, Lei Wang, Qi Wu

Folded substrate integrated waveguide (FSIW) has been proposed for further size reduction, while keeping the advantages of traditional SIW. FSIW-based horn antennas are very promising in millimeter wave applications. To improve the bandwidth and efficiency ...

Ieee2016

Modeling of Long-Term Multipactor Evolution in Microwave Components Including Dielectric Layers

Apostolos Sounas

Multipactor is a resonant vacuum discharge occurring in microwave components of satellite systems as well as in particle accelerators. Due to its undesirable effects, multipactor analysis constitutes a mandatory step in the design of modern satellite compo ...

EPFL2015

A New Set of Electrodes for Coaxial Quarter Wave Switched Oscillators

Farhad Rachidi-Haeri

We present a new profile for the electrodes forming the radial transmission line of a switched oscillator (SWO). The profile is formed using a curvilinear orthogonal space based on a specific 2-D transformation called logarithmic-tangent. The proposed prof ...

Ieee-Inst Electrical Electronics Engineers Inc2013

Electromagnetic Simulation of CERN Accelerator Components and Experimental Applications

Carlo Zannini

Wakes and impedances of single accelerator elements can be obtained by means of theoretical calculation, electromagnetic (EM) simulations or bench measurements. Since theoretical calculations apply only to simple structures and bench measurements have some ...

EPFL2013

Contribution to modeling multipactor and corona discharges in high power electromagnetic fields

Francisco Edén Sorolla Rosario

Multipactor and microwave corona breakdown are two high frequency discharges occurring within microwave components for space applications as well as within particle accelerators. The appearance of these phenomena results in the exponential growth of the el ...

EPFL2012

Electromagnetic Modelling of Planar Circuits Embedded in Laterally Shielded Multilayered Media

Laleh Golestanirad

Multilayered media with printed circuits embedded between their dielectric layers are one of the most successful technologies for manufacturing planar structures with a very promising performance-to-price ratio. These planar structures include many differe ...

EPFL2011

Cavity-backed slot array antenna in substrate-integrated waveguide technology

Roberto Torres Sánchez

A slot array placed on the face of a cavity realized in substrate-integrated waveguide technology is presented. Guidelines to design similar antennas are provided. The design has been done with the help of commercial software. The result is a low-cost, dir ...

Wiley-Blackwell2011

On the application of symmetry conditions and the convergence rate of modal series in the MoM-based integral equation analysis of laterally shielded multilayered media

Juan Ramon Mosig, Michael Mattes, Laleh Golestanirad

Integral equation (IE) formulations.solved by the Method of Moments (MoM) have been used successfully to address a vast variety of electromagnetic problems. Printed circuits embedded partially or totally in laterally bounded multilayered media,such as micr ...

2010

Rigorous Investigation of RF Breakdown Effects in High Power Microstrip Passive Circuits

Juan Ramon Mosig, Michael Mattes

This work presents a new rigorous investigation of corona effects in microstrip components. To carry out the investigation, a new software tool has been developed. The new tool first calculates the electromagnetic fields in complex microstrip structures us ...

2009

Enhanced CRLH transmission line performances using a lattice network unit cell

Juan Ramon Mosig, Frédéric Bongard, Julien Perruisseau-Carrier

A novel topology for the composite right/left-handed transmission line (CRLH TL) is presented. This type of CRLH TLs has the advantage of exhibiting an all-pass behavior and a frequency-independent characteristic impedance, in the so-called balanced case. ...

Institution of Engineering and Technology2009

Contribution to characterization techniques for practical metamaterials and microwave applications

Frédéric Bongard

Metamaterials (MTMs) are broadly defined as artificial composite materials specifically engineered to produce desired unusual electromagnetic properties not readily available in nature. The most interesting unusual property achievable with MTMs is probably ...

EPFL2009