Publications associées à Determination of the vacuum optomechanical coupling rate using frequency noise calibration

Publications associées (31)

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Non-contact sensing for anomaly detection in wind turbine blades: A focus-SVDD with complex-valued auto-encoder approach

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

2024

Magnetism of Single Surface Adsorbed Atoms Studied with Radio-Frequency STM

Clément Marie Soulard

This thesis investigates the magnetic properties of single atoms and molecules adsorbed on thin magnesium oxide decoupling layers, grown on a silver single crystal. To address these systems experimentally, we use a low temperature scanning tunneling micros ...

EPFL2024

A Spectral Ansatz for The Long-Time Homogenization of The Wave Equation

Matthias Benjamin Ruf

Consider the wave equation with heterogeneous coefficients in the homogenization regime. At large times, the wave interacts in a nontrivial way with the heterogeneities, giving rise to effective dispersive effects. The main achievement of the present wor ...

Ecole Polytechnique2024

Experimental observation of topological transition in linear and nonlinear parametric oscillators

Romain Christophe Rémy Fleury, Benjamin Apffel

Parametric oscillators are examples of externally driven systems that can exhibit two stable states with opposite phase depending on the initial conditions. In this work, we propose to study what happens when the external forcing is perturbed by a continuo ...

2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Mohammad Javad Karimi

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Nanomechanical resonators with low dissipation for quantum optomechanics

Alberto Beccari

Fields of technology as diverse as microwave filter construction, characterization of material interfaces with atomic precision, and detection of gravitational waves from astronomical sources employ mechanical resonators at their core. The utility of mecha ...

EPFL2023

Programmable Silicon Nitride Photonic Integrated Circuits

Tobias Kippenberg, Johann Emmeram Riemensberger, Rui Ning Wang, Anat Siddharth, Andrey Voloshin, Viacheslav Snigirev, Andrea Bancora, Vladimir Shadymov

Silicon Nitride (Si3N4) photonic integrated circuits (PICs) have emerged as core technology in a variety of applications ranging from LIDAR to quantum control and computing. However, the need for high-speed, low-voltage tuning and modulation has been a lon ...

IEEE2023

Complex-Valued-Autoencoder for Structural Health Monitoring with Frequency Modulated Continuous Wave Radar

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

Research Publishing2023

Scattering from Time-Modulated Transmission-Line Loads: Theory and Experiments in Acoustics

Romain Christophe Rémy Fleury, Matthieu Francis Malléjac

Scattering wave systems that are periodically modulated in time offer many new degrees of freedom to control waves in both the spatial and frequency domains. Such systems, albeit linear, do not conserve frequency and require the adaptation of the usual the ...

American Physical Society (APS)2023

Single-cell biology: what does the future hold?

Bart Deplancke

In this Editorial, our Chief Editor and members of our Advisory Editorial Board discuss recent breakthroughs, current challenges, and emerging opportunities in single-cell biology and share their vision of "where the field is headed." ...

WILEY2023

Tri-axial H-Field Sensor with Frequency-shaped Response in the band 400 MHz - 6 GHz

German Augusto Ramirez Arroyave

This contribution presents an isotropic field probe to assess human exposition to broadband magnetic fields in the 400 MHz to 6 GHz band according to the ICNIRP 2020 guidelines. This device complements the current practice in this band, based on the measur ...

IEEE2023

Ultra-Low Power Short-Range 60-GHz FMCW Radar Front-End

Sammy Cerida Rengifo

The millimeter wave (mmWave) frequency band is becoming very interesting over the past years because it provides the opportunity to operate using large bandwidths which are not available at lower frequencies. This enables new communication standards suppor ...

EPFL2023

Reticular chemistry for the rational design of mechanically robust mesoporous merged-net metal-organic frameworks

Berend Smit, Seyedmohamad Moosavi

Access to metal-organic frameworks (MOFs) with enhanced me-chanical stability is key to their successful deployment in practical applications. However, the high porosity of the material often af-fects mechanical stability. In this article, to achieve highl ...

CELL PRESS2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Analytic Approximation of In-Body Path Loss for Implanted Antennas

Anja Skrivervik, Mingxiang Gao

Implantable bioelectronic devices predominantly use wireless links for communication and/or power transfer. When considering transmitting implanted antennas, electromagnetic radiation through biological media is highly attenuated, and previous work has sho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Appropriations and Uses of Travel Time

Ludy Juliana González Villamizar

Time has always been a central factor in understanding the challenges of daily mobility. For a long time, and still today, methods of economic evaluation of transport projects have monetized time savings so that they can be included in the cost–benefit ana ...

ISTE Wiley2023

Fluorescence crosstalk reduction by modulated excitation-synchronous acquisition for multispectral analysis in high-throughput droplet microfluidics

Christoph Merten, Jatin Panwar

Crosstalk between fluorescent biomarkers significantly limits the resolution of multispectral fluorescence analysis in real-time droplet-microfluidics applications. The crosstalk is a result of overlapping emission and excitation spectra of different fluor ...

ROYAL SOC CHEMISTRY2023

NORM TORI OF ETALE ALGEBRAS AND UNRAMIFIED BRAUER GROUPS

Eva Bayer Fluckiger, Ting-Yu Lee

Let k be a field, and let L be an etale k-algebra of finite rank. If a is an element of k(x), let X-a be the affine variety defined by N-L/k(x) = a. Assuming that L has at least one factor that is a cyclic field extension of k, we give a combinatorial desc ...

Hebrew Univ Magnes Press2023