Publications associées à Do Carbon Nanotubes Contribute to Electrochemical Biosensing?

Publications associées (31)

Electrodeposition of polyaniline on reduced graphene oxide/cotton yarn with tunable electrochemical performance for flexible textile supercapacitors

Graphene/cotton fibers show significant promise in wearable energy storage due to their low cost, porous structure, and exceptional integration ability into wearable systems. However, the eco-unfriendly reductants and standalone electric double-layer capac ...

Elsevier Sci Ltd2024

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Modeling and characterization of the nucleation and growth of carbon nanostructures in physical synthesis

Kevin Rossi

Carbon nanostructures formed through physical synthesis come in a variety of sizes and shapes. With the end goal of rationalizing synthetic pathways of carbon nanostructures as a function of tunable parameters in the synthesis, we investigate how the initi ...

ELSEVIER2023

Plasmon-induced near-infrared fluorescence enhancement of single-walled carbon nanotubes

Giulia Tagliabue, Ardemis Anoush Boghossian, Shang-Jung Wu, Alessandra Antonucci, Theodoros Tsoulos, Amirmostafa Amirjani, Sayyed Hashem Sajjadi

Single-walled carbon nanotubes (SWCNTs) emit near-infrared (NIR) fluorescence that is ideal for optical sensing. However, the low quantum yields diminish the sensor’s signal-to-noise ratio and limits the penetration depths for in vivo measurements. In this ...

2022

Configurable Organic Electrochemical Transistors with Printed Functional Materials for Multiplexed Sweat Analysis

Silvia Demuru

Monitoring human sweat with wearable biochemical sensors could give insights into the hydration, fatigue, and health status, tracking the variations of biomarkers non-invasively and in real-time. In this field, organic electrochemical transistors (OECTs) a ...

EPFL2022

Cyclic Behaviour of Unidirectional Hybrid Interlayer Glass/Carbon and Carbon/Carbon Composites

Anastasios Vassilopoulos

The lack of ductility is a major drawback of fibre reinforced polymer (FRP) materials. As it is known, these materials are stiff and strong, but brittle with little or no warning before final failure. In the last decades, some solutions have been proposed ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Tandem electrocatalytic CO2 reduction with Fe-porphyrins and Cu nanocubes enhances ethylene production

Raffaella Buonsanti, Anna Loiudice, Min Wang

Copper-based tandem schemes have emerged as promising strategies to promote the formation of multi-carbon products in the electrocatalytic CO2 reduction reaction. In such approaches, the CO-generating component of the tandem catalyst increases the local co ...

ROYAL SOC CHEMISTRY2022

Directed evolution of DNA-wrapped single-walled carbon nanotube complexes for optical sensing

Benjamin Paul Johanès Gabriel Lambert

Single-walled carbon nanotubes (SWCNTs) have garnered significant interest for their applications in optical biosensing. SWCNTs exhibit a sensitive and photostable fluorescence in the near-infrared (NIR) range, allowing for the continuous monitoring of tar ...

EPFL2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites

Anastasios Vassilopoulos

This work investigates the quasi-static, low-cycle and fatigue behavior of hybrid glass/ultra-high modulus carbon (GC) and low modulus/ /high modulus carbon (CC) fiber composites. These pseudo-ductile unidirectional interlayer hybrids are a new type of com ...

2021

Thermally-Drawn Multi-Electrode Fibers for Bipolar Electrochemistry and Magnified Electrochemical Imaging

Fabien Sorin

Imaging systems using closed bipolar electrode (cBPE) arrays and electrochemiluminescence (ECL) have attracted great attention in recent years as a 2D imaging platform with high spatiotemporal resolution. However, the fabrication techniques for cBPE arrays ...

Wiley2021

Interaction of Fluorescent Single-Walled Carbon Nanotubes with Photosynthetic Microbes

Alessandra Antonucci

The discovery of carbon-based nanomaterials has impacted a variety of research areas in ways that could not be imagined three decades ago. Their unique combination of structural, optical, and electronic properties has made these nano-sized materials partic ...

EPFL2020

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

The authors report the fabrication and characterization of chemiresistive sensors, composed of a thermoplastic elastomer (TPE), styrene‐ethylene‐ran‐butylene‐styrene, and a high‐structure carbon black (CB) targeted for detecting hydrocarbons at or near roo ...

Wiley2020

Comparison of high density and nitrogen seeded detachment using SOLPS-ITER simulations of the tokamak a configuration variable

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Kevin Henricus Annemarie Verhaegh, Mirko Wensing, Hugo De Oliveira, Lorenzo Martinelli

First of a kind SOLPS-ITER simulations on tokamak a configuration variable (TCV) that include nitrogen have been performed to model recent nitrogen seeded detachment experiments. Based on spectroscopic measurements, a nitrogen recycling coefficient R-p(N) ...

2020

Non-covalent Methods of Engineering Optical Sensors Based on Single-Walled Carbon Nanotubes

Ardemis Anoush Boghossian, Alice Judith Gillen

Optical sensors based on single-walled carbon nanotubes (SWCNTs) demonstrate tradeoffs that limit their use in in vivo and in vitro environments. Sensor characteristics are primarily governed by the non-covalent wrapping used to suspend the hydrophobic SWC ...

2019

Templating colloidal sieves for tuning nanotube surface interactions and optical sensor responses

Ardemis Anoush Boghossian, Daniel Jerôme Siefman, Alice Judith Gillen, Shang-Jung Wu, Benjamin Paul Johanès Gabriel Lambert

Surfactants offer a tunable approach for modulating the exposed surface area of a nanoparticle. They further present a scalable and cost-effective means for suspending single-walled carbon nanotubes (SWCNTs), which have demonstrated practical use as fluore ...

2019

Protein Bioconjugation to Carbon Nanotubes for Near-Infrared Sensing

Vitalijs Zubkovs

Single-walled carbon nanotubes (SWCNTs) are a promising material for electrochemical and optical biosensing applications. Their small dimensions, large surface area, indefinite photostability, and remarkable electronic properties make SWCNTs an ideal trans ...

EPFL2019

Thermal Drawing of Polymer Nano-composites: Fluid Dynamic Analysis and Application to Novel Functional Fibers

Alexis Gérald Page

The thermal drawing process is emerging as a versatile platform for the development of multimaterial fiber devices and advanced textiles for sensing, energy harvesting or medical applications, owing to the possibility to integrate insulators, conductors an ...

EPFL2019

Hydrogen storage material

Andreas Züttel, Heena Yang

The present relates to a carbon material having a 3D structure and made of graphene oxide and carbon nanotubes, characterized in that the 3D structure consists in that the carbon nanotubes are located with some agglomeration between the graphene oxide laye ...

2019

Film Morphology Effect on VOC Sensor Performance Fabricated by Drop-On-Demand Inkjet-Printing

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

This paper presents a sensor for detecting volatile organic compounds with an inkjet-printed composite. The sensing material is composed of polystyrene (35 kg/mol molecular weight) and a high structure carbon black, Ketjenblack EC-600JD. We used a dual-sol ...

IEEE2019