Publications associées à Investigation and modeling of odors release from membrane holes on daily overlay in a landfill and its impact on landfill odor control

Influence of micro-patterned support properties and interfacial polymerization conditions on performance of patterned thin-film composite membranes

Kumar Varoon Agrawal, Cédric Karel J Van Goethem

Patterned membranes prepared via spray-modified non -solvent induced phase separation (s-NIPS) have successfully shown enhanced fluxes and better fouling control, thanks to the increased surface area and high fluid shear at the membrane/feed interface. The ...

Elsevier2024

From Surfactants to 3D Printing: How Ion-Chelator Pair Interactions Affect the Mechanical Properties of Bioinspired Materials

Gaia De Angelis

The remarkable adaptability observed in marine ecosystems has often inspired researchers when developing new soft materials. The research undertaken in this thesis explores how ion chelator pair interactions influence the mechanical properties of bioinspir ...

EPFL2024

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Jan Van Herle, Zoé Mury, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

Functionalized Å-scale Pores in Graphene for Carbon Capture

Kuang-Jung Hsu

Single-layer graphene, hosting a high density of functionalized molecular-sieving atom-thick pores, is considered to be an excellent material for gas separation membranes. These functionalized atom-thick pores enable the shortest transport pathway across t ...

EPFL2024

Membrane specificity of the human cholesterol transfer protein STARD4

Charlotte Julie Caroline Gehin

STARD4 regulates cholesterol homeostasis by transferring cholesterol between the plasma membrane and endoplasmic reticulum. The STARD4 structure features a helix-grip fold surrounding a large hydrophobic cavity holding the sterol. Its access is controlled ...

Academic Press Ltd- Elsevier Science Ltd2024

Crystal, defect, and morphology engineering of porous two-dimensional materials for ionic separation

Heng-Yu Chi

Ordered two-dimensional (2D) materials hosting Å-scale pores are highly promising for enabling challenging separation, thanks to well-defined pore geometry resulting in tight confinement of ions when hosted inside the pore. In addition, the 2D nature of th ...

EPFL2024

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Large Libraries of Structurally Diverse Macrocycles Suitable for Membrane Permeation

Christian Heinis, Alessandro Angelini, Mischa Schüttel, Ganesh Kumar Mothukuri, Manuel Leonardo Merz, Zsolt Bognár, Xinjian Ji, Edward Jeffrey Will, Alexander Lund Nielsen, Anne Sofie Luise Zarda

Macrocycles offer an attractive format for drug development due to their good binding properties and potential to cross cell membranes. To efficiently identify macrocyclic ligands for new targets, methods for the synthesis and screening of large combinator ...

Wiley-VCH Verlag GmbH2024

Advancements in Nanomechanical Characterization and Biomolecular Imaging with Atomic force Microscopy

Veronika Cencen

Atomic force microscopy (AFM) is a widely used imaging tool for obtaining a variety of information for a range of samples. Although it was initially intended to serve as a method of observing very flat solid surfaces, its use expanded into several other fi ...

EPFL2024

Homogenization theory captures macroscopic flow discontinuities across Janus membranes

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna, Kevin Wittkowski

Janus membranes, thin permeable structures with chemical and geometrical asymmetric properties, show great potential in industrial separation processes. Yet the link between the micro- and macro-scale behaviours of these membranes needs to be established r ...

Cambridge University Press2023

Towards ultrathin metal-organic frameworks membranes for high-performance separation

Kumar Varoon Agrawal, Heng-Yu Chi, Qi Liu, Shuqing Song, Ranadip Goswami

Research on metal-organic frameworks (MOFs) based membranes has gained a lot of attention in the last decade thanks to the unique and highly versatile chemistry of MOFs, which allows one to synthesize a variety of structural dimensions, topologies, pore si ...

Aip Publishing2023

Micro- or nanostructured optical element

Niels Quack, Dorian Giraud Herle

A micro- or nanostructured optical element (1) is proposed comprising: a membrane (3) with an array of holes (5), the membrane (3) comprising a membrane light wave facing surface; an array of pillars (7) sized and shaped such that a respective pillar (7) i ...

2023

High throughput wide field second harmonic imaging of giant unilamellar vesicles

Sylvie Roke, Pierre-Marc Jean Marie Dansette, Maksim Eremchev, David Roesel

Cell-sized giant unilamellar vesicles (GUVs) are an ideal tool for understanding lipid membrane structure and properties. Label-free spatiotemporal images of their membrane potential and structure would greatly aid the quantitative understanding of membran ...

AIP Publishing2023

A novel interfacial polymerization assisted phase inversion process for the facile fabrication of ion-selective nanofiltration membranes

Tao Liu, Zongyao Zhou, Shijie Hu

Interfacial polymerization (IP) and non-solvent induced phase inversion (NIPS) are the two most commonly used mainstream technologies to fabricate separation membranes. Taking their advantages, we developed a simple, facile and scalable method to integrate ...

Elsevier Science Sa2023

Effects of thermal, mechanical, and electrostatic perturbations on lipid membrane hydration investigated by second harmonic imaging

Seonwoo Lee

Hydrated lipid bilayer membranes are crucial components of cells and organelles, serving as the outer boundary that separates the cellular components from the extracellular environment. Lipid membranes regulate their structures and functions by dynamically ...

EPFL2023

Advances in polymer-based nanocomposite membranes for water remediation: Preparation methods, critical issues and mechanisms

Sami Rtimi

Membrane technology is a growing tool for contaminants removal from polluted water. Although various types of polymeric membranes have been developed for water remediation, the common drawbacks like fouling, hydrophobicity and low mechanical strength are y ...

Elsevier Sci Ltd2023

Structure of a membrane-bound menaquinol:organohalide oxidoreductase

Henning Paul-Julius Stahlberg, Christof Holliger, Julien Maillard, Lorenzo Cimmino, Dongchun Ni, Babatunde Edukpe Ekundayo

Organohalide-respiring bacteria are key organisms for the bioremediation of soils and aquifers contaminated with halogenated organic compounds. The major players in this process are respiratory reductive dehalogenases, corrinoid enzymes that use organohali ...

Nature Research2023

Simultaneous Electrophysiology and Imaging Reveal Changes in Lipid Membrane Thickness and Tension upon Uptake of Amphiphilic Gold Nanoparticles

Francesco Stellacci, Paulo Henrique Jacob Silva, Camilla Servidio, Xufeng Xu

Amphiphilic gold core nanoparticles (AmNPs) striped with hydrophilic 11-mercapto-1-undecanesulfonate (MUS) and hydrophobic 1-octanethiol (OT) ligands are promising candidates for drug carriers that passively and nondisruptively enter cells. Yet, how they i ...

Amer Chemical Soc2023

MPD and TMC supply as parameters to describe synthesis-morphology-performance relationships of polyamide thin film composite membranes

Kumar Varoon Agrawal, Cédric Karel J Van Goethem

This study assesses the influence during interfacial polymerization on polyamide thin film composite (TFC) morphology and performance of varying monomer concentrations and organic phases with widely varying physico-chemical characteristics (interfacial ten ...

ELSEVIER2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023