Publications associées à Dissolvable molecular bridges promoting buried interface modification for high-performance inverted perovskite solar cells

Publications associées (18)

Managing Excess Lead Iodide with Functionalized Oxo-Graphene Nanosheets for Stable Perovskite Solar Cells

Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long-term stability is gaining inc ...

Wiley-VCH Verlag GmbH2023

Influence of an Organic Salt-Based Stabilizing Additive on Charge Carrier Dynamics in Triple Cation Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Bin Ding, Yong Ding, Roland Christopher Turnell-Ritson

Besides further improvement in the power conversion efficiency (PCE) of perovskite solar cells (PSC), their long-term stability must also be ensured. Additives such as organic cations with halide counter anions are considered promising candidates to addres ...

Wiley2023

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Over 24% efficient MA-free Cs(x)FA(1-x)PbX(3) perovskite solar cells

Michael Graetzel

Methylammonium (MA)-free perovskites such as Cs(x)FA(1-x)PbX(3) (CsFA) show excellent thermal stability, favoring their use in perovskite solar cells (PSCs). However, the power conversion efficiency (PCE) of CsFA lags behind that of MA-containing formulati ...

CELL PRESS2022

Formate as Anti-Oxidation Additives for Pb-Free FASnI(3) Perovskite Solar Cells

Jiyoun Seo, Jaeki Jeong, Jinhyun Kim

Pb-free Sn-based perovskite solar cells (PSCs) have significant potential for application in photovoltaic devices because oftheir suitable bandgap, low exciton binding energy, high carrier mobility, and long diffusion length. However, their performance is ...

WILEY-V C H VERLAG GMBH2022

Mechanistic Insights into the Role of the Bis(trifluoromethanesulfonyl) imide Ion in Coevaporated p-i-n Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Mounir Driss Mensi, Hiroyuki Kanda, Klaus Leifer, Cristina Roldán Carmona, Albertus Adrian Sutanto, Keith Gregory Brooks, Maria Cristina Momblona Rincón, Cansu Igci, Nadja Isabelle Desiree Klipfel

Hybrid lead halide perovskites have reached comparable efficiencies to state-of-the-art silicon solar cell technologies. However, a remaining key challenge toward commercialization is the resolution of the perovskite device instability. In this work, we id ...

2021

Understanding the design principles of organic sensitizers for highly efficient dye sensitized solar cells

Marko Stojanovic

The conversion of solar to electrical power has presented itself as a solution to meet the growing energy demand and replace our current fossil fuel dependence, which causes dramatic damages to the environment. At the heart of this challenge lies the perfo ...

EPFL2021

Recent progress in black phosphorus nanostructures as environmental photocatalysts

Sami Rtimi

Hazardous chemicals excruciatingly contaminated water, air, and soil for the past few decades. Eco-friendly techniques to clean and or destroy these harmful chemicals is an urgent requirement at this moment. In this direction, a large number of methodologi ...

ELSEVIER SCIENCE SA2020

Quasi-Heteroface Perovskite Solar Cells

Ulf Anders Hagfeldt, Peng Wang

Perovskite solar cells (PSCs) have attracted unprecedented attention due to their rapidly rising photoelectric conversion efficiency (PCE). In order to further improve the PCE of PSCs, new possible optimization path needs to be found. Here, quasi-heterofac ...

WILEY-V C H VERLAG GMBH2020

Photoelectrochemical Cells Based on Dye Sensitization for Electricity and Fuel Production

Ulf Anders Hagfeldt, Nikolaos Vlachopoulos

Dye-sensitized semiconductor oxide photoelectrodes in which light is absorbed by a monomolecular layer of dye chemisorbed on a porous oxide substrate have attracted considerable interest in the last 35 years, mainly for the conversion of sunlight to electr ...

SWISS CHEMICAL SOC2019

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules

Michael Graetzel

Recent advances in the use of organic-inorganic hybrid perovskites for optoelectronics have been rapid, with reported power conversion efficiencies of up to 22 per cent for perovskite solar cells1-9. Improvements in stability have also enabled testing over ...

Nature Publishing Group2017

Sterically Hindered Phthalocyanines for Dye-Sensitized Solar Cells: Influence of the Distance between the Aromatic Core and the Anchoring Group

Michael Graetzel, Mohammad Khaja Nazeeruddin, Jun Ho Yum, Aravind Kumar Chandiran

A new phthalocyanine (Pc) bearing bulky peripheral substituents and a carboxylic anchoring group directly attached to the macrocycle has been prepared and used as a sensitizer in DSSCs, reaching 5.57% power conversion efficiency. In addition, an enhanced p ...

Wiley-Blackwell2014

Thin-Film Silicon Triple-Junction Solar Cells on Highly Transparent Front Electrodes With Stabilized Efficiencies up to 12.8%

Christophe Ballif, Franz-Josef Haug, Matthieu Despeisse, Mathieu Gérard Boccard, Grégory Bugnon, Michael Elias Stückelberger

High-efficiency thin-film silicon triple-junction solar cells in p-i-n configuration have been fabricated using amorphous silicon top cell absorber layers, as well as microcrystalline silicon middle and bottom cell absorbers. The triple-junction cells were ...

Ieee-Inst Electrical Electronics Engineers Inc2014

Low band gap S,N-heteroacene-based oligothiophenes as hole-transporting and light absorbing materials for efficient perovskite-based solar cells

Michael Graetzel, Mohammad Khaja Nazeeruddin, Shaik Mohammed Zakeeruddin, Peng Qin

Novel low band gap oligothiophenes incorporating S,N-heteropentacene central units were developed and used as hole-transport materials (HTMs) in solid-state perovskite-based solar cells. In addition to appropriate electronic energy levels, these materials ...

Royal Society of Chemistry2014

Kinetics of a-Si:H bulk defect and a-Si:H/c-Si interface-state reduction

Christophe Ballif, Stefaan De Wolf

Low-temperature annealing of hydrogenated amorphous silicon (a-Si:H) is investigated. An identical energy barrier is found for the reduction of deep defects in the bulk of a-Si:H films and at the interface such layers form with crystalline Si (c-Si) surfac ...

2012

Increased light harvesting in dye-sensitized solar cells with energy relay dyes

Michael Graetzel, Mohammad Khaja Nazeeruddin, Jun Ho Yum, Pascal Comte

Conventional dye-sensitized solar cells have excellent charge collection efficiencies, high open-circuit voltages and good fill factors. However, dye-sensitized solar cells do not completely absorb all of the photons from the visible and near-infrared doma ...

Nature Publishing Group2009

The function of a TiO2 compact layer in dye-sensitized solar cells incorporating "Planar" organic dyes

Michael Graetzel, Udo Bach

We present a device based study into the operation of liquid electrolyte dye-sensitized solar cells (DSSC's) using organic dyes. We find that, for these systems, it is entirely necessary to employ a compact TiO2 layer between the transparent fluorine doped ...

American Chemical Society (ACS)2008

Tetrahydrothiophenium-based ionic liquids for high efficiency dye-sensitized solar cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mingkui Wang, Peng Wang, Yiming Cao

Binary melts of S-ethyltetrahydrothiophenium iodide and dicyanoamide (or tricyanomethide) have been employed for dye-sensitized solar cells with high power conversion efficiencies up to 6.9% under the illumination of AM 1.5G full sunlight. We have further ...

2008