Publications associées à System transverse in-plane shear stiffness of pultruded GFRP bridge decks

Publications associées (34)

Dynamic behavior of exposed geomembrane systems in pressure waterways

Geomembrane systems have been used in dams and reservoirs as rehabilitation technology since several decades and are now used worldwide. They act as impervious layer to prevent and mitigate water leakage and damage to structures. They meet the needs of man ...

CRC Press/Balkema2023

Experimental investigation on the bending response of reuse-ready timber slabs – The Pixel Slab System

Corentin Jean Dominique Fivet, Edisson Xavier Estrella Arcos, Johnny Syriani

Current construction practices follow linear economic models of "take-make-dispose" that result in substantial material landfilling after the end-of-life of buildings. This issue takes relevance given the construction industry's significant stake in the hi ...

International Association for Shell and Spatial Structures (IASS)2023

Shear Response of Wet Weak Carbonate Rock/Grout Interfaces Under Cyclic Loading

Eleni Stavropoulou

The development and construction of offshore wind farms requires the correct estimation of the friction that can be mobilised at the rock/grout interface. In conventional studies, the shear behaviour of a joint is usually investigated with laboratory tests ...

2021

Origami-inspired carbon fiber-reinforced composite sandwich materials - Fabrication and mechanical behavior

Thomas Keller

A folding fabrication method inspired by origami for carbon fiber-reinforced composites to fabricate three-dimensional structures is presented. PMI foams serve as substrates, making it possible to manufacture this kind of origami-inspired composite sandwic ...

ELSEVIER SCI LTD2021

Tuning stiffness nonlinearty: theory and applications

Simon Nessim Henein, Ilan Vardi, Mohamed Gamal Abdelrahman Ahmed Zanaty

Perfect elasticity is not achievable in real-life situation, so spring stiffness is not perfectly constant. In this paper, we study the effect of modifying non-linear stiffness terms while keeping the nominal stiffness constant. We introduce three methods ...

ASME2020

Planar hydraulic fracture growth perpendicular to the isotropy plane in a transversely isotropic material

Brice Tanguy Alphonse Lecampion, Haseeb Zia, Fatima-Ezzahra Moukhtari

The configuration of a hydraulic fracture (HF) propagating perpendicular to the isotropy plane of a transversely isotropic (TI) material is encountered in most sedimentary basins. We account for both elastic and fracture toughness anisotropy, and investiga ...

2020

An Analytical Method to Predict the Structural Behavior of Timber-Concrete Structures With Brittle-to-Ductile Shear Connector Laws

Eugen Brühwiler

Timber-Concrete Composite (TCC) structures allow taking synergistic advantage of the properties of both materials to optimize the overall performances in terms of lightness, slenderness, acoustic insulation, vibrational behaviour and environmental footprin ...

ELSEVIER SCI LTD2020

Elastic properties of self-organized nanogratings produced by femtosecond laser exposure of fused silica

Yves Bellouard, Pieter Vlugter

Under certain exposure conditions, a femtosecond laser beam focused in the bulk of fused silica leads to the formation of self-organized structures consisting of a series of “nanolayers,” parallel to one another. Remarkably, this laser-induced nanoscale an ...

2020

Propagation of a planar hydraulic fracture perpendicular to the isotropy plane of a transversely isotropic material

Brice Tanguy Alphonse Lecampion, Haseeb Zia, Fatima-Ezzahra Moukhtari

We investigate the case of a hydraulic fracture (HF) propagating perpendicular to the isotropy plane of a transversely isotropic material: a relevant configuration for the growth of HFs in sedimentary rocks where fractures are propagating vertically across ...

53rd US Rock Mechanics/Geomechanics Symposium2019

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

2019

Isogeometric Analysis on V-reps: First results

Annalisa Buffa, Pablo Antolin Sanchez

Inspired by the introduction of Volumetric Modeling via volumetric representations (V-reps) by Massarwi and Elber in 2016, in this paper we present a novel approach for the construction of isogeometric numerical methods for elliptic PDEs on trimmed geometr ...

2019

Travelling heteroclinic waves in a Frenkel-Kontorova chain with anharmonic on-site potential

Boris Buffoni

The Frenkel-Kontorova model for dislocation dynamics from 1938 is given by a chain of atoms, where neighbouring atoms interact through a linear spring and are exposed to a smooth periodic on-site potential. A dislocation moving with constant speed correspo ...

ELSEVIER SCIENCE BV2019

Compliant riblets: Problem formulation and effective macrostructural properties

Giuseppe Antonio Zampogna

Small-scale, deformable riblets, embedded within the viscous sublayer of a turbulent boundary layer and capable to adapt to the overlying motion, are studied. The wall micro-grooves are made of a linearly elastic material and can undergo small deformations ...

2019

Growth of a radial hydraulic fracture accounting for the viscous fluid flow in a rough cohesive zone

Brice Tanguy Alphonse Lecampion, Dong Liu

We investigate the growth of an axisymmetric hydraulic fracture in an impermeable quasi-brittle material accounting for the presence of a fluid lag. The process zone is simulated using a linear softening cohesive zone model and is characterized by an incre ...

2019

Effective Stiffness and drift capacity of modern unreinforced masonry walls

Katrin Beyer, Bastian Valentin Wilding

Code design of unreinforced masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness and the ultimate drift capacity of the in-plane force-displacement response of URM walls. Eurocode 8, for example, e ...

2018

Supershear bursts in the propagation of a tensile crack in linear elastic material

Jean-François Molinari, Fabian Barras

Since the early years of the linear elastic theory of fracture [linear elastic fracture mechanics (LEFM)], scientists have sought to understand and predict how fast cracks grow in a material or slip fronts propagate along faults. While shear cracks can tra ...

2018

Shape memory alloys in fibre-reinforced polymer composites

Véronique Michaud, Amaël Maximilien Cohades

This article reviews the current state-of-the-art in the applications of shape memory alloy (SMA) wires into high performance fibre reinforced polymer composite materials (FRPs). SMAs have been investigated to date to address four main areas of properties ...

2018

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Micro-mechanical finite element modeling for in-plane behavior of historical masonry

Shenghan Zhang

Seismic assessment of unreinforced masonry structures remains a challenge. This dissertation investigates the in-plane behavior of historical masonry elements and proposes an advanced simulation method based on the cohesive zone model (CZM) in a finite ele ...

EPFL2018

Scanning Probe Microscopy Characterization of Organic Self-Assembled Monolayers

Evangelia-Nefeli Athanasopoulou

As technology advances, surface coatings become more and more important to assure materials performances. In recent years, molecular coatings have found larger acceptance and uses. Among them, self-assembled monolayers (SAMs) are attractive because they ar ...

EPFL2018