Publications associées à Interface States and Trapping Effects in Al1O3- and ZrO2/InAlN/AlN/GaN Metal-Oxide-Semiconductor Heterostructures

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an ...

Nature Portfolio2024

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Active Power Decoupling for Single-Phase Input-Series-Output-Parallel Solid-State Transformers

Drazen Dujic, Tianyu Wei, Andrea Cervone

Solid-state transformers with input-series outputparallel structures are being considered for a variety of applications requiring MVAC to LVDC conversion. Due to the singlephase AC/DC conversion at the input side, all floating cells of the solid-state tran ...

2024

Tomographic microscopy of functionally graded polymer-derived SiCN ceramics with tunable gradients

Jürgen Brugger, Lorenz Hagelüken

Polymer-derived ceramics (PDCs) are a very attractive class of materials due to their excellent properties such as resistance to high temperatures and harsh environments, adjustability of mechanical and functional behavior, and compatibility with a broad r ...

Elsevier Sci Ltd2024

500 MHz high resolution proximity sensors with fully integrated digital counter

Giovanni Boero, Nergiz Sahin Solmaz, Reza Farsi

We report on the design and characterization of two inductive proximity sensors based on LC oscillators operating at 500 MHz. The distance from the target is obtained by measuring the oscillation frequency variation. Both sensors contain an off-chip LC res ...

ELSEVIER SCI LTD2023

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Luis Guillermo Villanueva Torrijo, Danick Briand, Morgan Mc Kay Monroe

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Zenodo2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Luis Guillermo Villanueva Torrijo, Danick Briand, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Pathways to enhance electrochemical CO2 reduction identified through direct pore-level modeling

Sophia Haussener, Shuo Liu, Etienne Boutin, Evan Fair Johnson

Electrochemical conversion of CO2 to fuels and valuable products is one pathway to reduce CO2 emissions. Electrolyzers using gas diffusion electrodes (GDEs) show much higher current densities than aqueous phase electrolyzers, yet models for multi-physical ...

2023

Additive Fabrication of Microsupercapacitors

Amin Hodaei

Microsupercapacitors (with footprints from -mm up to -cm scale) have attracted attention for use as electrochemical energy storage devices to power wearables, IoT, and other small microsystems due to their high power density, excellent charge/discharge rev ...

EPFL2023

Dc-Link Ripple Suppression of Cascaded H-Bridge Based MV Grid Emulator Apparatus for Analysis and Testing of Grid-Tied Converters in Distribution System

Drazen Dujic, Chengmin Li, Xin Xiang, Jing Sheng

The medium-voltage grid emulator is gaining popularity for testing grid-code compliance of large-capacity converters for renewable energy resources. The cascaded H-bridge converter based on active-front-ends is a promising candidate for high-power grid emu ...

2023

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Amar Kapic, Andromachi Tsirou

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Investigation of thermoelectric nanomaterials

David Thomas Osenberg

Thermoelectric conversion remains an active research field in light of its potential to enhance energy efficiency by waste heat recovery in a noise and wear-free manner. Nanostructuring is responsible for most of the recently reported improvements of the ...

EPFL2023

Surface Charge Boundary Condition Often Misused in CO2 Reduction Models

Sophia Haussener, Etienne Boutin, Evan Fair Johnson

The Poisson-Nernst-Planck equations have been used to model species transport in electrochemical CO2 reduction, where the surface charge boundary condition accounts for the potential drop across the Stern layer. A direct comparison of the published models ...

AMER CHEMICAL SOC2023

Condition Health Monitoring for Medium-Voltage High-Power Modular Multilevel Converter

Ignacio Alejandro Polanco Lobos

Among the policies to reduce the consequences of GHG emissions, the decarbonization of the electrical, transport, and manufacturing sectors has profoundly changed how the electricity is produced, transmitted, distributed, and consumed, particularly imposin ...

EPFL2022

A Generalized Phase-Shift PWM Extension for Improved Natural and Active Balancing of Flying Capacitor Multilevel Inverters

Elison de Nazareth Matioli, Georgios Kampitsis

The emergence of wide bandgap power devices has brought the attention back to the flying capacitor (FC) multilevel inverters with a large number of stages, in an effort to increase the power density by minimizing the passive components. The main challenge ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Alexandre Schmid, David Palomeque Mangut

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

IEEE2022

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

Danick Briand, Rubaiyet Iftekharul Haque, Martin Lubej

This paper presents the design and development of a coplanar capacitive proximity sensor for the detection of the gap between the edges of dielectric foils. The finite element analysis is applied to study the design of the sensor by investigating the effec ...

2022

Thermodynamics of organic electrochemical transistors

Hsin Tseng, Matteo Cucchi

Though models describing the operating mechanism of organic electrochemical transistors (OECTs) have been developed, these models are unable to accurately reproduce OECT electrical characteristics. Here, the authors report a thermodynamic-based framework t ...

Nature Portfolio2022

Magnetic Properties of Surface Adsorbed Metal Adatoms and Dimers

Dante Philippe Sblendorio

This thesis investigates the magnetic properties of single atoms and dimers adsorbed on graphene and oxide decoupling layers supported by single crystal metal substrates, using scanning tunneling microscopy (STM) and spin-polarized scanning tunneling micro ...

EPFL2022

Scrutinizing thermally stimulated current transients originating from trapped charges in organic semiconductors: A drift-diffusion study

Frank Nüesch, Beat Ruhstaller

Thermally stimulated current (TSC) is a widely used technique to assess trap states and extract their density, energy, and capture rate using analytical expressions. In many cases, the latter are derived from physical models pertaining to inorganic semicon ...

AIP Publishing2022