Publications associées à Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion-wear components and effect of contact area

Publications associées (29)

A story of two transitions: From adhesive to abrasive wear and from ductile to brittle regime

Jean-François Molinari, Sacha Zenon Wattel

Atomistic simulations performed with a family of model potential with tunable hardness have proven to be a great tool for advancing the understanding of wear processes at the asperity level. They have been instrumental in finding a critical length scale, w ...

2024

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

Na Li, Du Wen

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Quantified interface chemistry and biophysics via water imaging

Sylvie Roke

High throughput wide-field second harmonic imaging enables the label-free imaging of interfacial (< 3 nm thick) water, with a spatial resolution of similar to 370 nm using similar to 100 ms acquisition times per image. The obtained interfacial orientationa ...

Spie-Int Soc Optical Engineering2024

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Decarbonizing the fertilizers sector: an alternative pathway for urea and nitric acid production

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

In order to alleviate the environmental impact that nitrogen fertilizers production is responsible for, several efforts have been addressed to incentivize the partial or total decarbonization of the supply chains of ammonia and its derivatives. The decarbo ...

2024

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Ece Mailand

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To addr ...

Amer Chemical Soc2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Role of Minimum Adhesive Wear Particle Size in Third-Body Layer Properties

Jean-François Molinari, Son-Jonathan Pham-Ba

We employ a novel discrete element method (DEM) force formulation to simulate adhesive wear and assess the effects of material and loading parameters on the properties of the third-body layer (TBL) formed during sliding motion. The study emphasizes the rol ...

2023

Wetting Dynamics Beneath an Impacting Droplet

Ramin Kaviani

Many natural and industrial processes involve fluid flow at a three phase interface between liquid, solid and gas. When the liquid is forced to move rapidly over the solid surface, the physical mechanisms governing contact line motions are multi-phase and ...

EPFL2023

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

The Three-Phase Contact Potential Difference Modulates the Water Surface Charge

Aleksandra Radenovic, Andrei Kiselev, Vasily Artemov

The surface charge of an open water surface is crucialfor solvationphenomena and interfacial processes in aqueous systems. However, themagnitude of the charge is controversial, and the physical mechanismof charging remains incompletely understood. Here we ...

AMER CHEMICAL SOC2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Florent Alexandre Boudoire, Elias Sebastian Klauser

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Understanding the role of surface oxygen-containing functional groups on carbon-supported cobalt catalysts for the oxygen evolution reaction

Manhui Wei, Andreas Züttel, Kangning Zhao, Liping Zhong, Thi Ha My Pham, Youngdon Ko

Supported Co-based catalysts exhibit promising catalytic activities in the oxygen evolution reaction (OER) during alkaline water electrolysis. Surface functionalization of the support modulates the dispersion of the catalysts and their interaction with the ...

Royal Society of Chemistry2023

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Tobias Brink, Enrico Milanese

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Activation of stainless steel 316L anode for anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar

The increased emphasis on renewable energy has resulted in a surge of R&D efforts into hydrogen and battery research. The intensive electrochemical environment surrounding the anodic oxygen evolution reaction (OER) has plagued both the activity and stabili ...

Elsevier2022

Understanding the mechanisms of adhesive wear for heterogeneous materials through atomistic simulations

Jean-François Molinari, Antonio Joaquin Garcia Suarez, Sacha Zenon Wattel

When two rough surfaces slide against each other, two main behaviors can be observed at the asperity level: A ductile behavior where the asperities tend to smooth out or a brittle behavior where the asperities detach and form debris. Recently, a critical l ...

2022