Publications associées à Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Antonia Georgopoulou Papadonikolaki, Josephine Anna Eleanor Hughes, Kai Christian Junge

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, James Alec Pierce Bourely, Nicolas Francis Fumeaux, Melissa Kossairi

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Luis Guillermo Villanueva Torrijo, Danick Briand, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Photocured Nanocellulose Composites: Recent Advances

Yves Leterrier, Aigoul Schreier, Mohammed Arif Poothanari, Julien Bras

This perspective gives an overview of recent progress in thefield of photocured polymer composites based on variousforms of nanocelluloses, with a focus on cellulose nanofibrils. The manufacturing processes and performances of these nanocellulosecomposites ...

AMER CHEMICAL SOC2022

Ultra-Compact Ka-band Metamaterial Waveguide Filters, Fabricated by Lost-Wax Casting

Maliheh Khatibi Moghaddam, Romain Christophe Rémy Fleury

This paper proposes a novel technique for the design of miniaturized Ka-band filters based on locally resonant metamaterials (LRMs), which are fabricated monolithically using lost wax casting. We implement ultra-small metamaterial filters by exploiting a n ...

IEEE2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020

The influence of casting position and disturbance induced by reinforcement on the structural concrete strength

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

It is well known that control specimens used to assess the concrete strength of new structures have different casting and curing conditions than those of actual structures. Notably, after pouring of the concrete and before its hardening, a number of phenom ...

ERNST & SOHN2021

Thermal Activation, Intermittency and Size Effects in the Plastic Deformation of Cast Aluminium Microwires

Suzanne Godelieve Alphonsine Verheyden

The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...

EPFL2018

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Hubert Girault, Véronique Amstutz, Emad Oveisi, Andreas Stephan Lesch, Victor Costa Bassetto

The accurate and reproducible large-scale production of catalyst layers containing low-cost, abundant electrocatalysts gains in importance. Herein, pivotal factors are discussed that need to be considered when a combined inkjet printing and photonic curing ...

2018

Effect of fiber orientation on the in-plane tensile response of UHPFRC reinforcement layers

Eugen Brühwiler, Emmanuel Denarié, Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on site Ultra-High Performance Fiber Reinforced cement-based Composite UHPFRC) layers is a very efficient reinforcement technique, currently spreading. For the design of these tensile reinf ...

Elsevier2016

Precision glass molding of high-resolution diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

The demand of high resolution diffractive optical elements (DOE) is growing. Smaller critical dimensions allow higher deflection angles and can fulfill more demanding requirements, which can only be met by using electron-beam lithography. Replication techn ...

Spie-Int Soc Optical Engineering2016

Fabrication process of silicone-based dielectric elastomer actuators

Samuel Rosset, Herbert Shea, Oluwaseun Adelowo Araromi, Samuel Schlatter

This contribution demonstrates the fabrication process of dielectric elastomer transducers (DETs). DETs are stretchable capacitors consisting of an elastomeric dielectric membrane sandwiched between two compliant electrodes. The large actuation strains of ...

Journal of Visualized Experiments2016

Controlling Mesopore Size and Processability of Transparent Enzyme-Loaded Silica Films for Biosensing Applications

Bernard Wenger, Heinrich Hofmann, Raphaël Pugin, Oswaldo Javier Pérez Anguiano, Emmanuel Scolan

Silica-based nanoporous thin films including large mesopores are relevant as enzyme supports for applications in biosensing. The diffusion and immobilization of large biomolecules such as enzymes in such porous films require the presence of large mesopores ...

Amer Chemical Soc2015

Structural Behavior of R-UHPFRC - RC Composite Slabs

Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on-site Ultra-High Performance Fiber Reinforced cement-based Composite (UHPFRC) layers is an efficient reinforcement technique, currently spreading. The thin layer of UHPFRC, with or withou ...

EPFL2015

Interaction between liquid aluminium and solid iron Al-rich intermetallics formation

Guillaume Pasche

Intermetallic phases formation is one of the phenomena, which when coupled to thermal and mechanical strains leads to the premature wear of aluminium die casting tools made out of steel. This work focuses on two aspects of this wear problem. The first and ...

EPFL2013