Publications associées à Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

Publications associées (28)

Pyroresistive response of percolating conductive polymer composites

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Zhiyuan Xie, Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

DC Power Distribution Networks with Direct Current Transformers

Renan Pillon Barcelos

The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...

EPFL2024

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Alexandre Schmid

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

IEEE2022

Elongated microstructured capacitive sensor

Véronique Michaud, Fabien Sorin, Dang Tùng Nguyen, Baris Çaglar, Chaoqun Dong, William Nicolas Duncan Esposito

The present invention concerns an elongated capacitive sensor (1) for fluid monitoring. The sensor (1) comprising: a fibre support (5) made of a dielectric material or dielectric composite material; and a first electrode (7, 9) and a second electrode (7, 9 ...

2021

Role of electric currents in the Fano resonances of connected plasmonic structures

Olivier Martin, Marco Riccardi

In this work, we use finite elements simulations to study the far field properties of two plasmonic structures, namely a dipole antenna and a cylinder dimer, connected to a pair of nanorods. We show that electrical, rather than near field, coupling between ...

2021

Electrical transport properties of Ru1-xTixO2 films deposited by magnetron sputtering technique

Silviu Cosmin Sandu, Rosendo Sanjines

The optical and electrical properties of Ru1-xTixO2 (0

PERGAMON-ELSEVIER SCIENCE LTD2021

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions

Pierrick Guy Robert Clément, Jürgen Brugger, Demetri Psaltis, Eirini Kakkava, Giulia Panusa, Jongmoon Jang

Polymer-derived ceramics (PDC) have recently gained increased interest in the field of bioceramics. Among PDC's, carbon-rich silicon oxycarbide ceramics (SiOC) possess good combined electrical and mechanical properties. Their durability in aggressive envir ...

AMER CHEMICAL SOC2020

Effects of 5 MeV electron irradiation on deep traps and electroluminescence from near-UV InGaN/GaN single quantum well light-emitting diodes with and without InAlN superlattice underlayer

Nicolas Grandjean, Jean-François Carlin, Raphaël Butté, Camille Haller

The electrical properties, electroluminescence (EL) power output and deep trap spectra were studied before and after 5 MeV electron irradiation of near-UV single-quantum-well (SQW) light-emitting diodes (LED) structures differing by the presence or absence ...

IOP PUBLISHING LTD2020

Approximate Kron Reduction Methods for Electrical Networks With Applications to Plug-and-Play Control of AC Islanded Microgrids

Giancarlo Ferrari Trecate, Alessandro Floriduz, Michele Tucci

Kron reduction (KR) is a methodology for analyzing an electrical network by replacing it with a simpler circuit having less nodes but the same terminal behavior of voltages and currents at target vertices. Existing approaches to instantaneous KR, however, ...

2019

Patterned biphasic electrical conductor and methods for producing thereof

Stéphanie Lacour, Arthur Edouard Hirsch

A method for manufacturing an electrical conductor is herein disclosed, said method comprising a) providing a substrate comprising on a surface thereof a solid metal conductive layer or film; b) depositing a liquid metal on said solid layer; c) allowing sa ...

2019

Sim-to-real transfer reinforcement learning for control of thermal effects of an atmospheric pressure plasma jet

Berend Smit

Applications of atmospheric pressure plasma jets (APPJs) present challenging feedback control problems due to the complexity of the plasma-substrate interactions. The plasma treatment of complex substrates is particularly sensitive to changes in the physic ...

2019

Wearable Triboelectric Generator based on a Hybrid Mix of Carbon Nanotube and Polymer Layers

Jürgen Brugger

A novel single-layer structured triboelectric generator (TEG) is proposed with a hybrid mix of carbon nanotube (CNT) and silk. Here, the mixing of two materials in liquid phase for proven effective power generation is shown. In this research, CNT provides ...

IOP PUBLISHING LTD2019

Silicon Photonic MEMS Phase-Shifter

Niels Quack, Hamed Sattari, Teodoro Graziosi, Marcell Kristof Kiss

We present a design for an analog phase shifter based on Silicon Photonic MEMS technology. The operation principle is based on a two-step parallel plate electrostatic actuation mechanism to bring a vertically movable suspended tapered waveguide in a first ...

2019

Tip connector for fluidic and electrical connection

Philippe Renaud, Yann Barrandon, Jean-Baptiste Bureau, David Vincent Bonzon, Georges Muller, David Forchelet, Nicolas Uffer

A connector for providing both a fluidic and electrical connection is disclosed, said connector having a proximal end, a distal end and an elongated body in between, characterized in that the elongated body has an inner cavity spanning throughout its lengt ...

2018

Multi-degree-of-freedom low-frequency electroacoustic absorbers through coupled resonators

Hervé Lissek, Sami Driss Karkar, Etienne Thierry Jean-Luc Rivet

Electroacoustic absorbers represent an interesting solution for low-frequency sound absorption in rooms. These systems simply consist of closed-box electrodynamic loudspeakers, whose acoustic impedance at the diaphragm is judiciously adjusted by connecting ...

Elsevier2018

On the Properties of the Compound Nodal Admittance Matrix of Polyphase Power Systems

Mario Paolone, Andreas Martin Kettner

Most techniques for power system analysis model the grid by exact electrical circuits. For instance, in power flow study, state estimation, and voltage stability assessment, the use of admittance parameters (i.e., the nodal admittance matrix) and hybrid pa ...

IEEE Institute of Electrical and Electronics Engineers2018