Publications associées à Effect of a collar on subsidence and local micromotion of cementless femoral stems: in vitro comparative study based on micro-computerised tomography

Non-destructive Prediction of the Buckling Load of Cylindrical Shells

The current research focuses on the prediction of the maximum axial compression load a cylindrical shell is able to bear. This maximum axial compression load is the value at which a cylindrical shell loses stability and abruptly buckles. After the buckling ...

EPFL2022

Overcorrected Implants for Total Shoulder Arthroplasty

Yasmine Boulanaache

Glenohumeral osteoarthritis is a degenerative shoulder joint disease, which causes the breakdown of articular cartilage and bone. People affected by this disease suffer from severe pain and eventually reduced mobility and poor life quality. This disease is ...

EPFL2021

Microtensile failure mechanisms in lamellar bone: Influence of fibrillar orientation, specimen size and hydration

Johann Michler, Daniele Casari, Tatiana Kochetkova

A mechanistic understanding of bone fracture is indispensable for developing improved fracture risk assessment in clinics. Since bone is a hierarchically structured material, gaining such knowledge requires analysis at multiple length scales. Here, the ten ...

ELSEVIER SCI LTD2021

A Vibrational Technique for in vitro Intraoperative Prosthesis Fixation Monitoring

Kamiar Aminian, Hooman Dejnabadi, Seyed Abdolmajid Yousefsani

Objective: In this paper, a new vibrational modal analysis technique was developed for intraoperative cementless prosthesis fixation evaluation upon hammering. Methods: An artificial bone (Sawbones)-prosthesis system was excited by sweeping of a sine signa ...

2020

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

Dominique Pioletti, Jorge Solana Munoz, Ulrike Kettenberger

BACKGROUND: Fracture fixation in weak bone is still a clinical challenge. Screw augmentation was shown to successfully increase their primary stability. The currently used calcium phosphate or polymeric bone cements, however, present important drawbacks su ...

2018

Knee Implant Loosening Detection: A Vibration Analysis Investigation

Kamiar Aminian, Hossein Rouhani, Arash Arami

Knee implant loosening is mainly caused by the weakness of the prosthesis-bone interface and is the main reason for surgical revisions. However, pre-operative diagnosis is difficult due to lack of accurate tests. In this study, we developed a vibration-bas ...

Springer Verlag2018

Fretting corrosion between bone and calcium phosphate-calcium titanate coatings

Stefano Mischler, Adriana Esguerra Arce

Biocompatibility is one of the biggest challenges for biomaterials development. This issue arises in the case of coatings. Calcium phosphate (CP) coatings are currently used to cover femoral stem implants, while calcium titanate (CT) has also been proposed ...

ELSEVIER SCIENCE SA2018

On Establishing Buckling Knockdowns for Imperfection-Sensitive Shell Structures

Emmanuel Georges Albert Virot

This paper investigates issues that have arisen in recent efforts to revise long-standing knockdown factors for elastic shell buckling, which are widely regarded as being overly conservative for well-constructed shells. In particular, this paper focuses on ...

ASME2018

Fixed and mobile-bearing total ankle prostheses: Effect on tibial bone strain

Alexandre Terrier, Maïka Réane Guillemin, Xavier Crevoisier, Caroline Sieger Fernandes

Background Total ankle replacement is associated to a high revision rate. To improve implant survival, the potential advantage of prostheses with fixed bearing compared to mobile bearing is unclear. The objective of this study was to test the hypothesis th ...

Elsevier2017

Micromotion-induced peri-prosthetic fluid flow around a cementless femoral stem

Dominique Pioletti, Alexandre Terrier, Valérie Hélène Emilie Malfroy Camine

Micromotion-induced interstitial fluid flow at the bone-implant interface has been proposed to play an important role in aseptic loosening of cementless implants. High fluid velocities are thought to promote aseptic loosening through activation of osteocla ...

Taylor & Francis2017

Dual mobility cups provide biomechanical advantages in situations at risk for dislocation: a finite element analysis

Alexandre Terrier, Valérie Parvex, Maïka Réane Guillemin, Adeliya Latypova

Purpose Constrained devices, standard implants with large heads, and dual mobility systems have become popular options to manage instability after total hip arthroplasty (THA). Clinical results with these options have shown variable success rates and signi ...

Springer Verlag2017

In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation

Dominique Pioletti, Ulrike Kettenberger

Locally applied bisphosphonates, such as Zoledronate, have been shown in several studies to inhibit peri-implant bone resorption and recently to enhance peri-implant bone formation. Studies have also demonstrated positive effects of hydroxyapatite particle ...

Wiley-Blackwell2017

Full-Scale Cyclic Testing of Deep Slender Wide-Flange Steel Beam-Columns under Unidirectional and Bidirectional Lateral Drift Demands

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

Deep and slender wide-flange steel beam-columns are commonly used in steel special moment frames (SMFs) in North America. These sections provide large moment-of-inertia required to satisfy the design code’s drift limits while keeping the column steel weigh ...

International Association of Earthquake Engineering2017

Full-field measurement of micromotion around a cementless femoral stem using micro-CT imaging and radiopaque markers

Dominique Pioletti, Alexandre Terrier, Valérie Hélène Emilie Malfroy Camine, Hannes Andreas Rüdiger

A good primary stability of cementless femoral stems is essential for the long-term success of total hip arthroplasty. Experimental measurement of implant micromotion with linear variable differential transformers is commonly used to assess implant primary ...

Elsevier2016

Micromotion and fluid flow around cementless femoral components in total hip arthroplasty

Valérie Hélène Emilie Malfroy Camine

Cementless total hip arthroplasty is a highly successful and reliable procedure to restore joint function and reduce pain in patients with severe osteoarthritis. Nevertheless, despite the technical advances over the last decades in the development of cemen ...

EPFL2016

Tribocorrosion under fluid lubrication : modeling wear of CoCrMo artificial hip joints

Shoufan Cao

Wear is still the key problem causing the failure and limiting the lifetime of artificial hip joints, especially for the polymer acetabular cup in the metal-on-polymer and ceramic-on-polymer articulations. To reduce the wear, metal-on-metal articulation ha ...

EPFL2016

Implant-based three-dimensional superimposition of the growing mandible in a rabbit model

The reliable assessment of craniofacial morphological changes during growth requires invariant regions for image registration. As these regions have not yet been identified in three dimensions, intra-osseous implants are required as fiducial markers for th ...

Oxford Univ Press2016

Peri-implant bone adaptations to overloading in rat tibiae: experimental investigations and numerical predictions

Joël Cugnoni, John Botsis, Marco Piccinini

Objectives(i) To assess the effects of mechanical overloading on implant integration in rat tibiae, and (ii) to numerically predict peri-implant bone adaptation. Materials and methodsTranscutaneous titanium implants were simultaneously placed into both tib ...

Wiley-Blackwell2016

Time course of bone screw fixation following a local delivery of zoledronate in a rat femoral model – a micro-finite element analysis

Dominique Pioletti, Alexandre Terrier, Ulrike Kettenberger, Adeliya Latypova

A good fixation of osteosynthesis implants is crucial for a successful bone healing but often difficult to achieve in osteoporotic patients. One possible solution to this issue is the local delivery of bisphosphonates in direct proximity to the implants, A ...

Elsevier2015

Adverse tissue reaction to corrosion at the neck-stem junction after modular primary total hip arthroplasty

Stefano Mischler, Pierre Mettraux

Complications related to the neck-stem junction of modular stems used for total hip arthroplasty (THA) are generating increasing concern. A 74-year-old male had increasing pain and a cutaneous reaction around the scar 1 year after THA with a modular neck-s ...

Elsevier Masson2015