Publication

Numerical Simulation of Porosity in Cements

Publications associées (30)

Meso-scale finite element modeling of Alkali-Silica-Reaction

Jean-François Molinari, Roozbeh Rezakhani, Emil Gallyamov

The Alkali-Silica Reaction (ASR) in concrete is a chemical reaction, which produces an expansive product, generally called “ASR gel”, and causes cracking and damage in concrete over time. Affecting numerous infrastructures all around the world, ASR has bee ...

2021

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Microstructural modelling of autogenous shrinkage in Portland cement paste at early age

Karen Scrivener, Shashank Bishnoi, Quang Huy Do

Purpose ...

EMERALD GROUP PUBLISHING LTD2020

Evolution of microstructural changes in cement paste during environmental drying

Karen Scrivener, Hamed Maraghechi, Wioletta Soja, Fabien Jacques Michel Georget

Exposure of concrete to the atmosphere changes the microstructure of the cement paste. However, knowledge about the alteration of the porosity due to drying is typically not considered in deterioration processes of the hardened cement paste. The purpose of ...

Pergamon-Elsevier Science Ltd2020

Young's modulus and creep of calcium-silicate-hydrate compacts measured by microindentation

Karen Scrivener, Pietro Lura, Zhangli Hu

In this paper, compacts of synthetic calcium silicate hydrate (C-S-H) with 0.8-1.5 calcium-to-silicon ratio (Ca/Si) and 30-80% porosity were prepared by one-direction cold pressing. The Young's modulus and the creep of C-S-H compacts were measured by micro ...

Pergamon-Elsevier Science Ltd2020

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Yosra Briki

Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...

EPFL2020

Unravelling chloride transport/microstructure relationships for blended-cement pastes with the mini-migration method

Karen Scrivener, Fabien Jacques Michel Georget, William Wilson

A chloride mini-migration method is proposed to estimate effective diffusion coefficients at the scale of the cement paste and to investigate mechanisms with complementary microstructure analyses on the same material. Blended-cement pastes with a wide rang ...

Pergamon-Elsevier Science Ltd2020

Effects of large macropores on soil evaporation in salt marshes

David Andrew Barry

The occurrence of macropores in salt marsh sediments is a natural and ubiquitous phenomenon. Although they are widely assumed to affect pore-water flow in salt marshes significantly, the mechanisms involved and their extent are not well understood. We cond ...

2020

Numerical Simulations of an Innovative Water Stirring Device for Fine Sediment Release: The Case Study of the Future Trift Reservoir

Pedro Filipe De Almeida Manso, Azin Amini, Anass Chraibi

Reservoir sedimentation and consequently lack of storage volume and perturbation of the operation of intakes and bottom outlet is a key challenge affecting both hydropower production as well as dam safety and flood management. In the framework of a peer-re ...

Springer2020

The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems

Karen Scrivener, François Henri Avet, Akindehinde Ayotunde Akindahunsi

This paper examines the possibility of the use of some clays calcined from Nigeria as partial substitutes for clinker in the production of Limestone Calcined Clay Cement (LC3). The clays were calcined in the oven at a temperature of 800 degrees C and for o ...

2020