Publications associées à A Needle-Shaped Electrochemical Sensor in Platinum for Robust Monitoring of Anaesthetics

Publications associées (44)

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Zoé Mury, Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

A method and system for optimizing design, implantation, and stimulation protocols of electrodes stimulating the nervous system

Silvestro Micera, Simone Romeni

A method for optimizing at least one of a geometry, an implantation procedure, and/or stimulation protocol of one or more electrodes for an electrical stimulation of a target structure in a nervous system of a living being by a computer device, the method ...

2024

Design of Cryo-CMOS Analog Circuits using the Gm/ID Approach

Christian Enz, Hung-Chi Han

The Gm/ID approach has proven to be an efficient technique for the design of low-power analog circuits even in advanced technology nodes. It has already been shown that the normalized Gm/ID is actually a universal figure-of-merit (FoM) that is independent ...

IEEE2023

Additively Manufactured Degradable Piezoelectric Microsystems for Sensing and Actuating

Danick Briand, Luis Guillermo Villanueva Torrijo, Nicolas Francis Fumeaux, Morgan Mc Kay Monroe

The global overabundance of electronic waste and ever-increasing concerns regarding the energy-and material-intensive manufacturing processes associated with traditional electronics are driving the development of solution-processed, degradable electronics. ...

Wiley2023

Virtual reality validation of naturalistic modulation strategies to counteract fading in retinal stimulation

Diego Ghezzi, Naïg Aurelia Ludmilla Chenais, Sandrine Brikh

Objective. Temporal resolution is a key challenge in artificial vision. Several prosthetic approaches are limited by the perceptual fading of evoked phosphenes upon repeated stimulation from the same electrode. Therefore, implanted patients are forced to p ...

2022

High-Speed Volumetric Bioprinting Approach For Biofabrication Of Complex Living Tissue Structures

Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot

MARY ANN LIEBERT, INC2022

Dynamic Probabilistic Pruning: A General Framework for Hardware-Constrained Pruning at Different Granularities

Alexandre Schmid

Unstructured neural network pruning algorithms have achieved impressive compression ratios. However, the resulting-typically irregular-sparse matrices hamper efficient hardware implementations, leading to additional memory usage and complex control logic t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

80 K cryogenic stage for ice lithography

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim

We present a cryogenic system design and development for ice lithography. The cryo-stage is designed with embedded channels to allow direct liquid nitrogen flow, enabling fast cryogenic cooling, and low sample temperature. The stage cools down to 78.8 K in ...

ELSEVIER2022

New Insights for Parasitic Effects of Label-Free Biosensors Based on Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Yihe Zhao

Capacitive micromachined ultrasonic transducers (CMUTs) are regarded as an attractive candidate in bio-applications such as imaging and molecule monitoring. However, the previous researches on biochemical sensing are mostly air-coupled application based on ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Adsorption Behavior of the Coenzyme NADH at the Carbon/ Electrolyte Interface Determined by Neutron Reflectometry

Mary Hannah Wood

The adsorption behavior of beta-nicotinamide adenine dinucleotide (NADH) at the carbon/electrolyte interface has been studied using a combination of neutron reflectometry (NR) and solution depletion isotherms. Coupling the NR technique with an electrochemi ...

2022

Enhancing the beamwidth of low profile single-fed microstrip antennas using parasitic elements

Anja Skrivervik, Ismael Vico Triviño

In this paper we present a technique to broaden the beamwidth of conventional patch microstrip antennas by using parasitic elements. This technique allows to keep the main advantages of microstrip antennas while increasing their beamwidth. We provide guide ...

IEEE2022

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Karen Scrivener, Mohsen Ben Haha, François Henri Avet, Xuerun Li, Ruben Anton Snellings, Diana Londoño Zuluaga, Pawel Tadeusz Durdzinski, Alastair Thomas Matthew Marsh

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...

SPRINGER2022

Monitoring and understanding Cu catalyst dissolution during CO2 electroreduction

Jan Vávra

Electrochemical reduction of carbon dioxide is a promising approach to decrease the amount of anthropogenic CO2 being released into the atmosphere, provided that a surplus of renewable electrical energy is available. Copper based materials are at the cente ...

EPFL2022

Imaging the Heterogeneity of the Oxygen Evolution Reaction on Gold Electrodes Operando: Activity is Highly Local

Sylvie Roke, Arianna Marchioro, Igor Nahálka

Understanding the mechanism of the oxygen evolution reaction (OER), the oxidative half of electrolytic water splitting, has proven challenging. Perhaps the largest hurdle has been gaining experimental insight into the active site of the electrocatalyst use ...

2020

A Cation Concentration Gradient Approach to Tune the Selectivity and Activity of CO2 Electroreduction

Xile Hu, Wenhao Ren

The linear scaling relationship of the binding energies of different intermediates limits the catalyst performance in CO 2 electroreduction. Here we demonstrate a cation concentration gradient strategy to promote the activity and tune the selectivity of CO ...

Wiley-VCH Verlag GmbH2022

Frequency-scalable fabrication process flow for lithium niobate based Lamb wave resonators

Luis Guillermo Villanueva Torrijo, Muhammad Faizan

In this paper, we demonstrate the fabrication and characterization of lithium niobate (LN) based Lamb wave mode (S0 and SH0) resonators that address the stringent requirements of RF filtering for modern communication systems. The devices consist of a 400 n ...

IOP PUBLISHING LTD2020

Conductive silicone elastomers electrodes processable by screen printing

Frank Nüesch, Jose Enrico Quijano Quinsaat

Conductive inks consisting of graphene and carbon black conductive fillers into a polydimethylsiloxane (PDMS) matrix, which can be processed into thin films by screen printing are developed. The influence of filler composition and content on mechanical and ...

Nature Research2019

Extended-gate field-effect transistor with aptamer functionalisation layer for measuring hormone concentration in biofluids and corresponding fabrication method

Mihai Adrian Ionescu, Shokoofeh Sheibani

The present invention concerns a biosensor (1) for sensing stress hormone cortisol concentration in a biofluid (27). The biosensor (1) comprises: an electrical transistor transducer (3) comprising a transistor gate electrode (17); a sensing electrode eleme ...

2022

3D-Integration Of Printed Electrochemical Sensors In Pet Microfluidics For Biochemical Sensing

Danick Briand, Peter Van der Wal, Silvia Demuru

This paper presents a novel process for screen printed electrode fabrication, functionalization and integration in a polyethylene terephthalate (PET) fluidics system for electrochemical analysis. The innovative components utilized are: 1. 3D Through-Foil V ...

IEEE2019

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022