Publications associées à Region Of Interest X-Ray Computed Tomography Via Corrected Back Projection

GANDALF: Graph-based transformer and Data Augmentation Active Learning Framework with interpretable features for multi-label chest Xray classification

Informative sample selection in an active learning (AL) setting helps a machine learning system attain optimum performance with minimum labeled samples, thus reducing annotation costs and boosting performance of computer-aided diagnosis systems in the pres ...

Elsevier2024

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Sylvain Dunand, Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Matthew James Large

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros

We seek to address how air entrapment mechanisms during infiltration are influenced by the wetting characteristics of the fluid and the pore network formed by the reinforcement. To this end, we evaluated the behavior of two model fluids with different surf ...

Elsevier Sci Ltd2023

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros, Guillaume Clément Broggi

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

2D Nanosystems: Applications of 2D Semiconductors for In-Memory Computing

Guilherme Migliato Marega

Machine learning and data processing algorithms have been thriving in finding ways of processing and classifying information by exploiting the hidden trends of large datasets. Although these emerging computational methods have become successful in today's ...

EPFL2023

Optimal digital filter selection for remote photoplethysmography (rPPG) signal conditioning

Ata Jedari Golparvar

Remote photoplethysmography (rPPG) using camera-based imaging has shown excellent potential recently in vital signs monitoring due to its contactless nature. However, the optimum filter selection for pre-processing rPPG data in signal conditioning is still ...

IOP Publishing Ltd2023

Class Specific Feature Disentanglement and Text Embeddings for Multi-label Generalized Zero Shot CXR Classification

Seyedbehzad Bozorgtabar

Robustness of medical image classification models is limited by its exposure to the candidate disease classes. Generalized zero shot learning (GZSL) aims at correctly predicting seen and unseen classes and most current GZSL approaches have focused on the s ...

Springer International Publishing Ag2023

HetCache: Synergising NVMe Storage and GPU acceleration for Memory-Efficient Analytics

Anastasia Ailamaki, Periklis Chrysogelos, Syed Mohammad Aunn Raza, Hamish Mcniece Hill Nicholson

Accessing input data is a critical operation in data analytics: i) slow data access significantly degrades performance, and ii) storing everything in the fastest medium, i.e., memory, incurs high operational and hardware costs. Further, while GPUs offer in ...

2023

Cross verified independent measurements of correlated bubble property distributions as part of the scale-up of a catalytic bubbling fluidized bed reactor

Philipp Fedor Riechmann

Methanation can be applied as part of a Power-to-Gas (PtG) concept to store renewable electricity. Using a catalytic bubbling fluidized bed (BFB) methanation reactor allows a flexible and economic operation. Properties of bubbles rising through the fluidiz ...

EPFL2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Learning to sample in Cartesian MRI

Thomas Sanchez

Magnetic Resonance Imaging (MRI) is a non-invasive, non-ionizing imaging modality with unmatched soft tissue contrast. However, compared to imaging methods like X-ray radiography, MRI suffers from long scanning times, due to its inherently sequential acqui ...

EPFL2022

AstriFlash: A Flash-Based System for Online Services

Babak Falsafi, Mark Johnathon Sutherland, Siddharth Gupta, Lei Yan, Yunho Oh

Modern datacenters host datasets in DRAM to offer large-scale online services with tight tail-latency requirements. Unfortunately, as DRAM is expensive and increasingly difficult to scale, datacenter operators are forced to consider denser storage technolo ...

2023

Insights into the interaction of a shale with CO2

Lyesse Laloui, Eleni Stavropoulou

Caprock formations, such as shales, play a key role in safe underground CO2 storage since they serve as a hydromechanical barrier that prevents migration of the injected CO2 to the surface. While their hydromechanical response is important to ensure their ...

2022

Bragg edge tomography characterization of additively manufactured 316L steel

Christian Leinenbach, Roland Logé, Nikola Kalentics, Efthymios Polatidis, Markus Strobl

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels

Ludger Weber, Giovanni Bianchi, Alberto Ortona, Manoj Kondibhau Naikade, Caroline Hain

In this work, the mechanisms leading to the pore closure in reactive melt infiltration (RMI) of carbon by pure silicon and a near eutectic Si-8 at-pct Zr alloy at 1500 and 1700 degrees C under vacuum were studied. Various geometrical configurations of micr ...

ELSEVIER SCI LTD2022

Tuning paradigm of external stimuli driven electronic, optical and magnetic properties in hybrid perovskites and metalorganic complexes br

Mohammad Khaja Nazeeruddin

We have witnessed a wide range of theoretical as well as experimental investigations to envisage external stimuli induced changes in electronic, optical and magnetic properties in the metal organiccomplexes, while hybrid perovskites have recently joined th ...

ELSEVIER SCI LTD2022

Ion temperature spectroscopic measurements in high rotation discharges by means of X-ray diagnostic at JET

Henri Weisen

Measurement of the X-ray spectra of the He-like Ni ions (Ni26+) and their dielectronic satellites (Ni25+, Ni24+, and Ni23+) plays a crucial role in determination of electronic and ion temperature of plasma in the JET device. Because n >= 3 satellites of Ni ...

2022

Exploring the inner workings of the clove hitch knot

Paul Grandgeorge, Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Tomohiko Sano, Changyeob Baek

We perform a combined experimental and computational investigation of the clove hitch knot. We develop a physical model for the clove hitch by tying an elastic rod onto a rigid cylinder. In the experiments, we characterize the mechanical performance, geome ...

ELSEVIER2022

Method for reading and writing unreliable memories and a corresponding memory controller device and memory

Andreas Peter Burg, Reza Ghanaatian Jahromi

A method of accessing a memory space of a memory device with a decoder, the memory space having faults, including the steps of performing a memory access operation by an electronic device to a access a logical memory space of the memory device, and randomi ...

2022