Publications associées à Multilevel Micro-Structuring of Glassy Carbon Molds for Precision Glass Molding

Publications associées (33)

Biofilaments from recycled high-density polyethylene and rice husks for fused filament fabrication: Biofilamente aus recyceltem Polyethylen hoher Dichte und Reishülsen für die Herstellung von Schmelzfilamenten

The benefits of green technology have industrial use of composites reinforced with biofibers garner attention. They are replacing conventional plastics due to their capability to solve environmental issues. Despite this shift in material development, the s ...

2025

Temperature-invariant crystal–glass heat conduction: From meteorites to refractories

Nicola Marzari

The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show that the dominant conduction mechanisms of crystals (particle-like propagation) and glas ...

Proceedings of the National Academy of Sciences2025

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Frustrated magnets in the limit of infinite dimensions: Dynamics and disorder-free glass transition

Achille Mauri

We study the statistical mechanics and the equilibrium dynamics of a system of classical Heisenberg spins with frustrated interactions on a d -dimensional simple hypercubic lattice, in the limit of infinite dimensionality d -> infinity . In the analysis we ...

Amer Physical Soc2024

3D diffractive optics for linear interconnects and nonlinear processing

Niyazi Ulas Dinç

The optical domain presents potential avenues for enhancing both computing and communication due to its inherent properties of bandwidth, parallelism, and energy efficiency. This research focuses on harnessing 3-Dimensional (3D) diffractive optics for nove ...

EPFL2024

Local vs. cooperative: Unraveling glass transition mechanisms with SEER

Matthieu Wyart, Wencheng Ji

Which phenomenon slows down the dynamics in supercooled liquids and turns them into glasses is a long-standing question of condensed matter. Most popular theories posit that as the temperature decreases, many events must occur in a coordinated fashion on a ...

National Academy of Sciences2024

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Non-Destructive X-Ray Imaging of Patterned Delta-Layer Devices in Silicon

Gabriel Aeppli

The progress of miniaturization in integrated electronics has led to atomic and nanometer-sized dopant devices in silicon. Such structures can be fabricated routinely by hydrogen resist lithography, using various dopants such as P and As. However, the abil ...

WILEY2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Jacobus Gerardus Rudolph Staal

Liquid composite moulding methods are widely applied for manufacturing of fibre reinforced polymer (FRP) composites and consist of two main stages: impregnation of fibrous reinforcements by a liquid monomer resin and curing of this resin. This thesis work ...

EPFL2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Direct Observation of the Phase Transition in C60 Fullerene

Chengcheng Yan

In the third study, the order-disorder phase transition of single-crystal C60 is studied using time-resolved electron microscopy. Solid C60 undergoes a first-order phase transition upon heating to 260 K. This is a structural transition from the low-tempera ...

EPFL Infoscience2023

Electronic Coupling of Metal-to-Insulator Transitions in Nickelate-Based Heterostructures

Duncan Thomas Lindsay Alexander, Bernat Mundet

In rare earth nickelates, the metal-to-insulator transition observed as a function of temperature can be described using an electronic and a structural order parameter. The electronic one is linked to the electronic disproportionation observed below the tr ...

WILEY2023

Charge multipole correlations and order in Cs2TaCl6

Henrik Moodysson Rønnow, Ivica Zivkovic, Jian Rui Soh, Jana Pásztorová

We examine the role of charge, structural, and spin degrees of freedom in the previously poorly understood phase transition in the 5d1 transition-metal double perovskite Cs2TaCl6 using a combination of computational and experimental techniques. Our heat ca ...

AMER PHYSICAL SOC2023

Murunskite - a new class of functional material

Davor Tolj

The subject of the present work is discovery and in-depth characterization of a new class of functional materials. Tuning of the bond polarity and orbital occupation with a goal of establishing balance between localization and delocalization of electrons - ...

EPFL2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

High density lithium niobate photonic integrated circuits

Tobias Kippenberg, Rui Ning Wang, Johann Emmeram Riemensberger, Anat Siddharth, Mikhail Churaev, Nikolai Kuznetsov, Zihan Li, Junyin Zhang, Zelin Tan

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023