Publications associées à New Reliability Assessment of MEMS Components under Accumulative Testing for Space Applications

In vivo X-ray microtomography locally affects stem radial growth with no immediate physiological impact

Pascal Turberg, Laura Mekarni, Charlotte Grossiord, Hervé Cochard

Microcomputed tomography (mu CT) is a nondestructive X-ray imaging method used in plant physiology to visualize in situ plant tissues that enables assessments of embolized xylem vessels. Whereas evidence for X-ray-induced cellular damage has been reported, ...

Oxford Univ Press Inc2024

ForMAX - a beamline for multiscale and multimodal structural characterization of hierarchical materials

Vitor Silva, Zhongwen Yao, Yi Zhang, Marianne Liebi, Yiming Li

The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. ...

Int Union Crystallography2024

A compact approach to higher-resolution resonant inelastic x-ray scattering detection using photoelectrons

Henrik Moodysson Rønnow, Markus Scholz

The detection of inelastically scattered soft x-rays with high energy resolution usually requires large grating spectrometers. Recently, photoelectron spectrometry for analysis of x-rays (PAX) has been rediscovered for modern spectroscopy experiments at sy ...

Iop Publishing Ltd2024

Direct observations of X-rays produced by upward positive lightning

Farhad Rachidi-Haeri, Marcos Rubinstein, Antonio Sunjerga, Thomas Chaumont

X-rays have been observed in natural downward cloud-to-ground lightning for over 20 years and in rocket-triggered lightning for slightly less. In both cases, this energetic radiation has been detected during the stepped and dart leader phases of downward n ...

Nature Publishing Group2024

X-ray chemical imaging for assessing redox microsites within soils and sediments

Vincent Noel, Meret Aeppli

Redox reactions underlie several biogeochemical processes and are typically spatiotemporally heterogeneous in soils and sediments. However, redox heterogeneity has yet to be incorporated into mainstream conceptualizations and modeling of soil biogeochemist ...

Frontiers Media Sa2024

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Modulation of the nanoscale motion rate of Candida albicans by X-rays

Sandor Kasas, María Inés Villalba

IntroductionPatients undergoing cancer treatment by radiation therapy commonly develop Candida albicans infections (candidiasis). Such infections are generally treated by antifungals that unfortunately also induce numerous secondary effects in the patient. ...

Frontiers Media SA2023

Catalyst Aggregate Size Effect on the Mass Transport Properties of Non-Noble Metal Catalyst Layers for PEMFC Cathodes

Yen-Chun Chen, Vasiliki Tileli, Robin Pierre Alain Girod, Michele Bozzetti, Secil Unsal

Non-noble metal catalysts (NNMCs) are regarded as a promising alternative to the costly Pt-based materials required to catalyze the oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC) cathodes. However, the large diversity of NNMC ...

ELECTROCHEMICAL SOC INC2023

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Cross verified independent measurements of correlated bubble property distributions as part of the scale-up of a catalytic bubbling fluidized bed reactor

Philipp Fedor Riechmann

Methanation can be applied as part of a Power-to-Gas (PtG) concept to store renewable electricity. Using a catalytic bubbling fluidized bed (BFB) methanation reactor allows a flexible and economic operation. Properties of bubbles rising through the fluidiz ...

EPFL2022

Beware of beam damage under reaction conditions: X-ray induced photochemical reduction of supported VOx catalysts during in situ XAS experiments

Oliver Kröcher, Davide Ferri, Anna Zabilska, Olga Safonova

In situ X-ray absorption spectroscopy (XAS) is a powerful technique for the investigation of heterogeneous catalysts and electrocatalysts. The obtained XAS spectra are usually interpreted from the point of view of the investigated chemical processes, there ...

ROYAL SOC CHEMISTRY2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Exploring the inner workings of the clove hitch knot

Paul Grandgeorge, Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Tomohiko Sano, Changyeob Baek

We perform a combined experimental and computational investigation of the clove hitch knot. We develop a physical model for the clove hitch by tying an elastic rod onto a rigid cylinder. In the experiments, we characterize the mechanical performance, geome ...

ELSEVIER2022

Bragg edge tomography characterization of additively manufactured 316L steel

Christian Leinenbach, Roland Logé, Nikola Kalentics, Efthymios Polatidis, Markus Strobl

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Insights into the interaction of a shale with CO2

Lyesse Laloui, Eleni Stavropoulou

Caprock formations, such as shales, play a key role in safe underground CO2 storage since they serve as a hydromechanical barrier that prevents migration of the injected CO2 to the surface. While their hydromechanical response is important to ensure their ...

2022

The shapes of physical trefoil knots

John Maddocks, Paul Grandgeorge, Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Tomohiko Sano, Changyeob Baek

We perform a compare-and-contrast investigation between the equilibrium shapes of physical and ideal trefoil knots, both in closed and open configurations. Ideal knots are purely geometric abstractions for the tightest configuration tied in a perfectly fle ...

2021

Photo- and thermally-induced electronic and structural dynamics in perovskites and transition metal oxides

Oliviero Cannelli

In this thesis, we exploited optical and X-ray pump-probe methods in a synergistic approach to study the interplay of the electronic, spin and structural degrees of freedom in two class of complex systems relevant for solar energy conversion applications: ...

EPFL2021

Relation between Inner Structural Dynamics and Ion Dynamics of Laser-Heated Nanoparticles

Christoph Bostedt

When a nanoparticle is irradiated by an intense laser pulse, it turns into a nanoplasma, a transition that is accompanied by many interesting nonequilibrium dynamics. So far, most experiments on nanoplasmas use ion measurements, reflecting the outside dyna ...

American Physical Society2021

Core-Valence Attosecond Transient Absorption Spectroscopy of Polyatomic Molecules

Jiri Vanicek, Nikolay Golubev

Tracing ultrafast processes induced by interaction of light with matter is often very challenging. In molecular systems, the initially created electronic coherence becomes damped by the slow nuclear rearrangement on a femtosecond timescale which makes real ...

2021

In-operando dynamic visualization of flow through porous preforms based on X-ray phase contrast imaging

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros

Direct visualization is often sought to elucidate flow patterns and validate models to predict the filling kinetics during processes whereby a liquid resin infiltrates a textile porous preform. Here, X-ray phase contrast interferometry is evaluated to imag ...

2021