Publications associées à Horizontal HALL devices: A lumped-circuit model for EDA simulators

Publications associées (32)

Strain relaxation and multidentate anchoring in n-type perovskite transistors and logic circuits

Mohammad Khaja Nazeeruddin, Olga Syzgantseva

The engineering of tin halide perovskites has led to the development of p-type transistors with field-effect mobilities of over 70 cm2 V-1 s-1. However, due to their background hole doping, these perovskites are not suitable for n-type transistors. Ambipol ...

Nature Portfolio2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Active Voltage Balancing with Seamless Integration into Dual Gate Driver for Series Connection of SiC MOSFETs

Drazen Dujic, Rui Wang

The versatility of half-bridge configuration of silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module contributes to its widespread adoption, highlighting the popularity and significance of its corresponding dual gat ...

2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

Neurostimulation and Wireless Data Transmission Circuits for Implantable High-Density Neural Interfaces

Cong Ding

Over the past years, implantable closed-loop neural interfaces have received increasing attention for their potential to enhance the understanding of the brain, treat neurological disorders, and provide unprecedented opportunities for individuals with para ...

EPFL2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Electrical spectroscopy of defect states and their hybridization in monolayer MoS2

Andras Kis, Oleg Yazyev, Ahmet Avsar, Zhenyu Wang, Yanfei Zhao, Mukesh Kumar Tripathi, Kristians Cernevics, Juan Francisco Gonzalez Marin, Cheol Yeon Cheon, Hyungoo Ji

Defects in solids are unavoidable and can create complex electronic states that can significantly influence the electrical and optical properties of semiconductors. With the rapid progress in the integration of 2D semiconductors in practical devices, it is ...

Nature Research2023

Unraveling the Electrochemical Electrode Coupling in Integrated Organic Electrochemical Transistors

Matteo Cucchi

Organic electrochemical transistors (OECTs) have gained enormous attention due to their potential for bioelectronics and neuromorphic computing. However, their implementation into real-world applications is still impeded by a lack of understanding of the c ...

WILEY-V C H VERLAG GMBH2023

Surfactant behavior and limited incorporation of indium during in situ doping of GeSn grown by molecular beam epitaxy

Thomas Hagger, Anna Fontcuberta i Morral, Andrea Giunto

GeSn is a promising group-IV semiconductor material for on-chip Si photonics devices and high-mobility transistors. These devices require the use of doped GeSn regions, achieved preferably in situ during epitaxy. From the electronic valence point of view, ...

AMER PHYSICAL SOC2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Single Chip Dynamic Nuclear Polarization Microsystems

Nergiz Sahin Solmaz

Nuclear magnetic resonance (NMR) methods are powerful tools employed in many fields, including physics, chemistry, material science, biology, and medicine. The use of NMR methodologies in an even wider range of applications is often hindered by the relativ ...

EPFL2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Modal engineering of electromagnetic circuits to achieve rapid settling times

Matthias Imboden

Inductive circuits and devices are ubiquitous and important design elements in many applications, such as magnetic drives, galvanometers, magnetic scanners, applying direct current (DC) magnetic fields to systems, radio frequency coils in nuclear magnetic ...

AIP Publishing2023

Electrical Spectroscopy of Defect States in Synthetic 2D Materials

Yanfei Zhao

Two-dimensional (2D) materials such as graphene and transition metal dichalcogenide (TMDC) are considered as one of the most promising material platforms for future electronic devices, due to their ultra-thin thickness and fascinating electrical and optica ...

EPFL2022

Energy Efficient Sensing using Steep Slope Devices

Teodor Rosca

Today, we are witnessing the Internet of Things (IoT) revolution, which facilitates and improves our lives in many aspects, but comes with several challenges related to the technology deployment at large scales. Handling ever growing amounts of information ...

EPFL2022

New Insights for Parasitic Effects of Label-Free Biosensors Based on Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Yihe Zhao

Capacitive micromachined ultrasonic transducers (CMUTs) are regarded as an attractive candidate in bio-applications such as imaging and molecule monitoring. However, the previous researches on biochemical sensing are mostly air-coupled application based on ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

LiNiO Junction Gate for High-performance Enhancement-mode GaN Power Transistor

Taifang Wang

GaN metal-oxide-semiconductor high electron mobility transistors (MOS)HEMTs) offer outstanding properties for next-generation power electronics devices. The high conductivity, high voltage blocking capability, high operation frequency, and device-level int ...

EPFL2022

High-Temperature HEMT Mode

Farzan Jazaeri

Taking into account the impact of self-heating and temperature rise effects, this work presents a physics-based analytical model for HEMTs, operating continuously from room temperature to high temperatures in linear and saturation regimes. Relying on the c ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

On the Modeling of Organic Electrochemical Transistors

Matteo Cucchi

Due to their synaptic functionality based on interacting electronic and ionic charge carriers, organic electrochemical transistors (OECTs) appeal as highly attractive candidates for a new generation of organic neuromorphic devices. Despite their acknowledg ...

SPIE-INT SOC OPTICAL ENGINEERING2022