Publications associées à Tribological and tribocorrosion behavior of nickel sliding against oxide ceramics

Publications associées (40)

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

A story of two transitions: From adhesive to abrasive wear and from ductile to brittle regime

Jean-François Molinari, Sacha Zenon Wattel

Atomistic simulations performed with a family of model potential with tunable hardness have proven to be a great tool for advancing the understanding of wear processes at the asperity level. They have been instrumental in finding a critical length scale, w ...

2024

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Cyclical Progress in Design and Technology

Giovanni De Micheli

Progress in engineering systems is the result of the combined improvements of technology and design methods. It is often a cyclic process, stimulated by success and failure. When the innovation loop stalls in producing effective progress, a change in parad ...

Institute of Electrical and Electronics Engineers Inc.2023

The influence of wood surface treatments with different biomolecules on dry and wet strength of linear friction welded joints

Yves Weinand

The moisture resistance of friction-welded wood joints can be improved by applying bio-based bonding additives. Several biomolecules including tannic acid, organosolv lignin from hardwood, kraft lignin from softwood, and derivates thereof, were investigate ...

TAYLOR & FRANCIS LTD2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Impact of chlorination and ozonation of dissolved organic matter on its photo-induced production of long-lived photooxidants and excited triplet states

Urs von Gunten, Stephanie Christa Remke, Joanna Maria Houska

Recent studies suggested that long-lived photooxidants (LLPO), which are reactive intermediates formed during irradiation of dissolved organic matter (DOM), may consist of phenoxyl radicals derived from phenolic moieties of the DOM. Besides the well-studie ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Breakdown of Reye’s theory in nanoscale wear

Jean-François Molinari, Tobias Brink, Antonio Joaquin Garcia Suarez

Building on an analogy to ductile fracture mechanics, we quantify the size of debris particles created during adhesive wear. Earlier work suggested a linear relation between tangential work and wear debris volume, assuming that the debris size is proportio ...

2023

Single monkey-saddle singularity of a Fermi surface and its instabilities

Christopher Marc Mudry

Fermi surfaces can undergo sharp transitions under smooth changes of parameters. Such transitions can have a topological character, as is the case when a higher-order singularity, one that requires cubic or higher-order terms to describe the electronic dis ...

2023

Resist-Free E-beam Lithography for Patterning Nanoscale Thick Films on Flexible Substrates

Caroline Hain

Resist-based lithographic tools, such as electron beam (e beam) and photolithography, drive today's state-of-the-art nanoscale fabrication. However, the multistep nature of these processes, expensive resists, and multiple other consumables limit their pote ...

2023

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Lei Zhang, Kangning Zhao

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Amer Chemical Soc2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Florent Alexandre Boudoire, Elias Sebastian Klauser

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

Photoconductive Switching Of A High-Voltage Actuator Array

Herbert Shea, Edouard Franck Vincent Gustave Leroy, Shai-Shmuel Shmulevich

We present a method to control individual high-voltage actuators in an array using microfabricated photoconductive switches and a light projection system, thus overcoming the challenges of on-chip control at high voltages. Such switching capabilities go be ...

IEEE2022

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

Integrated photonic circuits for terahertz applications

Ileana-Cristina Benea-Chelmus

This talk will discuss recent advances in the nascent field of integrated photonic circuits for terahertz applications. This field explores photonic circuit technology to create miniaturized terahertz emitters and detectors by non-linear optical processes ...

IEEE2022