Publications associées à Exploratory Topology Modelling of Form-Active Hybrid Structures

Publications associées (26)

Tension-tension fatigue behavior of basalt composite hybrid joints

The tension–tension fatigue behavior of pseudo-ductile hybrid bonded-bolted double lap basalt composite joints, composed of pseudo-ductile adhesives and adherends with multi-directional fiber architecture, was experimentally investigated. The fatigue damag ...

2024

Hybrid Simulator for Capturing Dynamics of Synthetic Populations

Michel Bierlaire, Marija Kukic

This paper presents a novel hybrid framework for generating and updating a synthetic population. We call it hybrid because it combines model-based and data-driven approaches. Existing generators produce a snapshot of synthetic data that becomes outdated ov ...

IEEE2024

Enhancing higher education through hybrid and flipped learning: Experiences from the GRE@T-PIONEeR project

Yi Zhang, Mathieu Hursin

GRE@T-PIONEeR is a Horizon 2020 project coordinated by Chalmers University of Technology, running over the period 2020-2024. 18 university teachers from 8 different universities located in 6 different countries gathered forces to develop and offer advanced ...

Elsevier Science Sa2024

Instabilities in Elastic and Magneto-Elastic Beams and Shells: from Shell Buckling to the Design of a Programmable Braille Reader

Arefeh Abbasi

In this thesis, we conduct a comprehensive investigation into structural instabilities of both elastic and magneto-elastic beams and shells, resulting in a creative proposal to design a programmable braille reader. Methodologically, we combine numerical si ...

EPFL2024

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Moahan Murugappan

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

EPFL2024

A hybrid microscopic model for multimodal traffic with empirical observations from aerial footage

Nikolaos Geroliminis, Georgios Anagnostopoulos

Microscopic traffic flow models can be distinguished in lane-based or lane-free depending on the degree of lane-discipline. This distinction holds true only if motorcycles are neglected in lane-based traffic. In cities, as opposed to highways, this is an o ...

2023

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

Xabier Sarasola Martin

The European Roadmap to Fusion Electricity (Federici et al., 2018) [1] details the path to complete within the next three decades the DEMOnstration power plant, DEMO, aiming to a net gain of Energy Q=40. The 2018 DEMO baseline considers a 2 GW tokamak devi ...

2023

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

2023

Dissipative Embedded Column Bases for Enhanced Seismic Performance of Steel Moment Resisting Frames

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Hiroyuki Inamasu

This paper presents an innovative design concept for embedded column base (ECB) connections. The developed ECB connection achieves a non-degrading hysteretic response. In the proposed ECB connections, the dissipative zone is shifted into the embedded porti ...

EEME2023

Playing Brains: The Ethical Challenges Posed by Silicon Sentience and Hybrid Intelligence in DishBrain

Georg Michael Joachim Starke

The convergence of human and artificial intelligence is currently receiving considerable scholarly attention. Much debate about the resulting Hybrid Minds focuses on the integration of artificial intelligence into the human brain through intelligent brain- ...

2023

Building structures made of reused cut reinforced concrete slabs and walls: A case study

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Nicole Widmer

Reuse of reinforced concrete (RC) components reduces construction’s environmental impacts and waste. Rather than crushing the concrete of an obsolete structure, its components are saw cut and later reassembled in a new structure. The theoretical feasibilit ...

CRC Press2023

Analytical modeling and experimental validation of rotationally actuated pinned–pinned and fixed–pinned buckled beam bistable mechanisms

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Hubert Pierre-Marie Benoît Schneegans, Loïc Benoît Tissot-Daguette

Buckled beams have become key building blocks in compliant mechanisms to achieve nonlinear behaviors, such as bistability, constant-force and stiffness tuning. However, designing and modeling such components is challenging due to their highly nonlinear cha ...

2022

Microresonator Dissipative Kerr Solitons Synchronized to an Optoelectronic Oscillator

Tobias Kippenberg, Wenle Weng, Jijun He

Using phase-modulation-induced potential gradient whose period is synchronized to a microwave opto-electronic oscillator, dissipative Kerr solitons generated in a crystalline optical microresonator are trapped by the soliton tweezing effect, exhibiting a s ...

American Physical Society (APS)2022

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Multiobjective Vector Modulation for Improved Control of NPC-Based Multi-Source Inverters in Hybrid Traction Systems

Andrea Cervone

The concept of a multi-source inverter (MSI) based on NPC topology was recently introduced for hybrid-electric powertrains to connect several dc sources to the traction load in a single conversion stage without magnetics. This work proposes a new modulatio ...

2022

Seismic stability of steel moment resisting frames with inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos

This paper summarizes preliminary findings of nonlinear simulations aiming to quantify the seismic demands of codecompliant steel MRFs with variable panel zone targeted shear distortions, 𝛾!. The probability of beam fractures is explicitly considered in th ...

Earthquake Engineering Research Institute2022

Welded moment connections with highly dissipative panel zones for enhanced seismic performance of steel moment frames

Andronikos Skiadopoulos

Research conducted after the 1994 Northridge earthquake in the U.S. and the 1995 Kobe earthquake in Japan led to the development of today's pre-qualified beam-to-column connections for capacity-designed steel moment resisting frames (MRFs). Welded moment c ...

EPFL2022

Pedestrian Stop and Go Forecasting with Hybrid Feature Fusion

Alexandre Massoud Alahi, Taylor Ferdinand Mordan

Forecasting pedestrians' future motions is essential for autonomous driving systems to safely navigate in urban areas. However, existing prediction algorithms often overly rely on past observed trajectories and tend to fail around abrupt dynamic changes, s ...

2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Nikolay Bykovskiy

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Nonlinear Frequency Conversion in the Hybrid Si3N4 - LiNbO3 Integrated Platform

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Mikhail Churaev, Viacheslav Snigirev, Terence Albert Emile Blésin

We demonstrate optical frequency comb generation in hybrid high-Q optical microresonators fabricated using direct wafer bonding of photonic Damascene silicon nitride wafer with thin-film lithium niobate-on-insulator (LNOI). The devices enable direct phase ...

IEEE2021