Publications associées à Memristive-Biosensors: A New Detection Method by Using Nanofabricated Memristors

Publications associées (22)

High density lithium niobate photonic integrated circuits

Tobias Kippenberg, Rui Ning Wang, Johann Emmeram Riemensberger, Anat Siddharth, Mikhail Churaev, Nikolai Kuznetsov, Zihan Li, Junyin Zhang, Zelin Tan

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023

An equilibrated flux a posteriori error estimator for defeaturing problems

Annalisa Buffa, Rafael Vazquez Hernandez, Ondine Gabrielle Chanon

An a posteriori error estimator based on an equilibrated flux reconstruction is proposed for defeaturing problems in the context of finite element discretizations. Defeaturing consists in the simplification of a geometry by removing features that are consi ...

2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Unbiased Likelihood Estimation of Wright–Fisher Diffusion Processes

Fabio Nobile

In this paper we propose a Monte Carlo maximum likelihood estimation strategy for discretely observed Wright–Fisher diffusions. Our approach provides an unbiased estimator of the likelihood function and is based on exact simulation techniques that are of s ...

Springer Cham2024

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu, Mojtaba Chevalier

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein ...

Wiley-VCH Verlag GmbH2022

Template directed synthesis of antibody Fc conjugates with concomitant ligand release

Natalia Gasilova

Antibodies are an attractive therapeutic modality for cancer treatment as they allow the increase of the treatment response rate and avoid the severe side effects of chemotherapy. Notwithstanding the strong benefit of antibodies, the efficacy of anti-cance ...

ROYAL SOC CHEMISTRY2022

Filtered data and eigenfunction estimators for statistical inference of multiscale and interacting diffusion processes

Andrea Zanoni

We study the problem of learning unknown parameters of stochastic dynamical models from data. Often, these models are high dimensional and contain several scales and complex structures. One is then interested in obtaining a reduced, coarse-grained descript ...

EPFL2022

Representing location choice within activity-based models

Michel Bierlaire, Timothy Michael Hillel, Janody Pougala

Since the 70s, there has been a growing interest in activity-based modelling. This approach models the need to travel as a result of performing daily activities (Bowman and Ben-Akiva, 2001). Nevertheless, the activities need to be scheduled which involves ...

2022

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Smart Slit Assembly Employing Continuously Tunable MEMS Shutter

Niels Quack, Hamed Sattari, Gergely Huszka, Anton Lagosh

We present the concept and detailed design of a Smart Slit Assembly for next generation spectrometers, and we experimentally demonstrate operation of an individual 221 mu m x 111 mu m smart slit channel employing a MEMS actuated shutter to continuously mod ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...

EPFL2021

Optimized electrochemical breakdown etching using temporal voltage variation for formation of nanopores in a silicon membrane

Miao Zhang

Dielectric breakdown etching is a well-known method of making nanopores on thin (similar to 50 nm) dielectric membranes. However, voltage driven translocation of biomolecules through such nanopores becomes extremely fast. For improved detection, for instan ...

ELSEVIER SCIENCE SA2021

Dissemination of Mycobacterium tuberculosis is associated to a SIGLEC1 null variant that limits antigen exchange via trafficking extracellular vesicles

Jacques Fellay

The identification of individuals with null alleles enables studying how the loss of gene function affects infection. We previously described a non-functional variant in SIGLEC1, which encodes the myeloid-cell receptor Siglec-1/CD169 implicated in HIV-1 ce ...

2021

Systematic design of millisecond gasification reactor for the incorporation of gas-sieving nanopores in single-layer graphene

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Shiqi Huang, Shaoxian Li, Kuang-Jung Hsu

Etching an ensemble of vacancy defects (nanopores) in single-layer graphene (SLG) to obtain a high density of nanopores with an effective size that enables high-performance gas sieving is challenging. This is because nanopore nucleation and expansion are u ...

2021

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

Olivier Martin, Christian Santschi, Banafsheh Abasahl

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resis ...

IOP PUBLISHING LTD2021

Shining Diamond: from Micro- and Nano-Engineering to Quantum Photonics

Sichen Mi

The discovery of room-temperature single photon emission from color centers in diamond has in recent years boosted research interest in this renowned material in photonics and quantum community and beyond. Following understanding some basic principles of h ...

EPFL2021

The Michelangelo step: removing scalloping and tapering effects in high aspect ratio through silicon vias

Benoît Bruno Pasquier, Edoardo Charbon, Sandro Carrara, Simone Frasca, Rebecca Camilla Leghziel

We present here, for the first time, a fabrication technique that allows manufacturing scallop free, non-tapered, high aspect ratio in through-silicon vias (TSVs) on silicon wafers. TSVs are among major technology players in modern high-volume manufacturin ...

Nature Research2021

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021

Real- and Q-space travelling: multi-dimensional distribution maps of crystal-lattice strain (epsilon(044)) and tilt of suspended monolithic silicon nanowire structures

Yusuf Leblebici, Antonia Neels, Alex Dommann, Zuhal Tasdemir

Silicon nanowire-based sensors find many applications in micro- and nano-electromechanical systems, thanks to their unique characteristics of flexibility and strength that emerge at the nanoscale. This work is the first study of this class of micro- and na ...

INT UNION CRYSTALLOGRAPHY2020

3D metal freeform micromanufacturing

Andreas Mortensen, Yves Bellouard, Raphaël Charvet, Léa Deillon, Fatmah Ebrahim, Tao Yang, Luciano Borasi, Enrico Casamenti, Cyril Henri Dénéréaz, Sacha Jérémy Florentin Pollonghini

Despite remarkable progress made in recent years, producing freeform three-dimensional micro-components out of copper, silver or gold and their alloys remains an engineering challenge: current processes are either too slow to be economically viable, or pro ...

2021