Publications associées à In-situ grown horizontal carbon nanotube membrane

Publications associées (30)

Semiconductor-based device architectures in multimaterial fibers

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Front-End Circuits for Radiation-Hard Monolithic CMOS Sensors targeting High-Energy Physics Applications

Francesco Piro

Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...

EPFL2023

Integrated silicon photonic MEMS

Niels Quack, Alain Yuji Takabayashi, Hamed Sattari

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Modeling and characterization of the nucleation and growth of carbon nanostructures in physical synthesis

Kevin Rossi

Carbon nanostructures formed through physical synthesis come in a variety of sizes and shapes. With the end goal of rationalizing synthetic pathways of carbon nanostructures as a function of tunable parameters in the synthesis, we investigate how the initi ...

ELSEVIER2023

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Carbon nanotube uptake in cyanobacteria for near-infrared imaging and enhanced bioelectricity generation in living photovoltaics

Ardemis Anoush Boghossian, Alice Judith Gillen, Vitalijs Zubkovs, Alessandra Antonucci, Benjamin Paul Johanès Gabriel Lambert, Nils Schürgers, Melania Reggente, Charlotte Elisabeth Marie Roullier, Mohammed Mouhib

Single-walled carbon nanotubes (SWCNTs) have unique optoelectronic properties that make them suitable for applications ranging from phototherapy to imaging and sensing, but their uptake has mainly been explored in eukaryotic cells. Here the authors explore ...

2022

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Controlled filamentation instability as a scalable fabrication approach to flexible metamaterials

Fabien Sorin, Louis Marie Philippe Martin-Monier, Pierre-Luc Eloi Piveteau, William Nicolas Duncan Esposito

Long and flexible arrays of nanowires find impactful applications in sensing, photonics, and energy harvesting. Conventional manufacturing relies largely on lithographic methods limited in wafer size, rigidity, and machine write time. Here, we report a sca ...

Nature Portfolio2022

Thermally-Drawn Multi-Electrode Fibers for Bipolar Electrochemistry and Magnified Electrochemical Imaging

Fabien Sorin

Imaging systems using closed bipolar electrode (cBPE) arrays and electrochemiluminescence (ECL) have attracted great attention in recent years as a 2D imaging platform with high spatiotemporal resolution. However, the fabrication techniques for cBPE arrays ...

Wiley2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

The Michelangelo step: removing scalloping and tapering effects in high aspect ratio through silicon vias

Benoît Bruno Pasquier, Edoardo Charbon, Sandro Carrara, Simone Frasca, Rebecca Camilla Leghziel

We present here, for the first time, a fabrication technique that allows manufacturing scallop free, non-tapered, high aspect ratio in through-silicon vias (TSVs) on silicon wafers. TSVs are among major technology players in modern high-volume manufacturin ...

Nature Research2021

Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites

Anastasios Vassilopoulos

This work investigates the quasi-static, low-cycle and fatigue behavior of hybrid glass/ultra-high modulus carbon (GC) and low modulus/ /high modulus carbon (CC) fiber composites. These pseudo-ductile unidirectional interlayer hybrids are a new type of com ...

2021

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Wafer-Level Vacuum Sealing for Packaging of Silicon Photonic MEMS

Niels Quack, Alain Yuji Takabayashi, Hamed Sattari

Silicon (Si) photonic micro-electro-mechanical systems (MEMS), with its low-power phase shifters and tunable couplers, is emerging as a promising technology for large-scale reconfigurable photonics with potential applications for example in photonic accele ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Wafer-Scale Fabrication of Nanopore Devices for Single-Molecule DNA Biosensing using MoS2

Aleksandra Radenovic, Andras Kis, Martina Lihter, Michal Daniel Macha, Michael Graf, Andrey Chernev, Mukesh Kumar Tripathi, Mukeshchand Thakur, Jochem Deen

Atomically thin (2D) nanoporous membranes are an excellent platform for a broad scope of academic research. Their thickness and intrinsic ion selectivity (demonstrated for example in molybdenum disulfide-MoS2) make them particularly attractive for single-m ...

2020

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Centimeter-scale gas-sieving nanoporous single-layer graphene membrane

Kumar Varoon Agrawal, Shiqi Huang, Mostapha Dakhchoune, Guangwei He, Luc Sébastien Bondaz, Wan-Chi Lee

High-permeance, molecular-sieving, nanoporous single-layer graphene (NSLG) membranes are highly promising for gas separation. However, the formation of cracks during the transfer of NSLG to a low-cost porous support is difficult to avoid. These cracks are ...

2020