Publications associées à Ultra-high quality surface passivation of crystalline silicon wafers in large area parallel plate reactor at 40 MHz

Publications associées (49)

Solar photons beyond the band gap wavelengths: their effect on solution-processed solar cells

A deep understanding of how solution-processed solar cells (SSCs) perform under varying temperatures and irradiance is crucial for their optimal design, synthesis, and use. However, current partial spectral characterization, primarily below the band gap wa ...

Royal Society of Chemistry2025

Localized Tunneling 1D Perovskitoid Passivated Contacts for Efficient and Stable Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Yong Ding, Kai Zhang

Interface engineering has proven to be an effective approach for passivating interfacial imperfections to mitigate non-radiative recombination, but the subpar interface quality between the perovskite and the charge transport layer has hindered advancements ...

2025

Optical assessment of lignin-containing nanocellulose films under extended sunlight exposure

Tiffany Abitbol

This study investigates the stability and UV-blocking properties of cellulose nanofibril (CNF) and TEMPO-oxidized cellulose nanofibril (TOCNF) films, with and without lignin, under 1000 h of artificial sunlight. The literature to date provides no quantitat ...

SPRINGER2025

High-Efficiency Carbon Perovskite Solar Cells via Cathode Interface Engineering by using CuPc Hole-Transporting Layers

Mohammad Khaja Nazeeruddin

Carbon perovskite solar cells (C-PSCs) represent a promising photovoltaic (PV) technology that addresses the long-term operating stability needed to compete with commercial Si solar cells. However, the poor interface contacts between the carbon electrode a ...

2025

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

Simon Baptiste Rieckhoff

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

WILEY2025

Controls of Ecohydrological Grassland Dynamics in Agrivoltaic Systems

Sara Bonetti

Agrivoltaic systems are characterized by the co-existence of photovoltaic panels on agricultural land, allowing simultaneous solar energy and food production without need for further land. Agrivoltaic installations alter the local microclimatic conditions ...

AMER GEOPHYSICAL UNION2025

Optimization of hybrid sensible-latent seasonal heat storage systems

William Orlando Delgado Díaz, Sophia Haussener

This study presents a coupled techno-economic and environmental model of hybrid sensible-latent thermal energy storage (TES) systems, integrating phase change material (PCM) macro-capsules to enhance storage capacity and performance. The multi-scale model ...

2025

Valence and Site Engineering Enable Efficient Broadband Near‐Infrared Emission at 960 nm in Cr3+‐Activated Forsterite

Jean-Claude Bünzli

Near‐infrared (NIR) light sources hold great potential for applications in night vision illumination, bio‐imaging, and non‐destructive testing. However, radiationless de‐activation and low absorption restrict the development of high‐efficiency blue light e ...

Wiley2025

Advancing Multi-Dimensional Simulation of Nuclear Fuel Behavior: from LOCA Analysis to Fast Reactor Applications

Edoardo Luciano Brunetto

Current research on nuclear fuel focuses on two primary objectives. The first is to optimize the fuel used in the current generation of nuclear reactors in terms of safety, efficiency, and economics. This has driven efforts to increase discharge burnup and ...

EPFL2025

Gamma noise to non-invasively monitor nuclear research reactors

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari, Pavel Frajtag, Tom Mager

Autonomous nuclear reactor monitoring is a key aspect of the International Atomic Energy Agency’s strategy to ensure nonproliferation treaty compliance. From the rise of small modular reactor technology, decentralized nuclear reactor fleets may strain the ...

Nature Research2024

Strain relaxation and multidentate anchoring in n-type perovskite transistors and logic circuits

Mohammad Khaja Nazeeruddin, Olga Syzgantseva

The engineering of tin halide perovskites has led to the development of p-type transistors with field-effect mobilities of over 70 cm2 V-1 s-1. However, due to their background hole doping, these perovskites are not suitable for n-type transistors. Ambipol ...

Nature Portfolio2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Enhancing Efficiency of Industrially-Compatible Monolithic Perovskite/Silicon Tandem Solar Cells with Dually-Mixed Self-Assembled Monolayers

Mohammad Khaja Nazeeruddin, Peng Gao

The antisolvent-assisted spin-coating still lags behind the thermal evaporation method in fabricating perovskite films atop industrially textured silicon wafers in making monolithic perovskite/silicon solar cells (P/S-TSCs). The inhomogeneity of hole-selec ...

Wiley-V C H Verlag Gmbh2024

Cu(II) and Ni(II) Phthalocyanine-Based Hole-Transporting Materials for Stable Perovskite Solar Cells with Efficiencies Reaching 20.0%

Mohammad Khaja Nazeeruddin, Jianxing Xia

Herein, Cu(II)Pcs and Ni(II)Pcs peripherally tetra-functionalized with 5-hexylthiophene (HT), 5-hexyl-2,2 '-bithiophene (HBT), and tertbutyl groups (TB) are readily synthesized and employed as hole-transporting materials (HTMs) in mixed-ion perovskite ([FA ...

WILEY-V C H VERLAG GMBH2024

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Fateme Kiani Shahvandi

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Sylvain Dunand

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Triarylamine Trisamide Interfacial Modulation for Perovskite Photovoltaics

Runzhong Zhang, Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Ghewa Alsabeh

Hybrid perovskites stand out as one of the leading materials in the new generation of photovoltaics. Their stability under operating conditions, however, remains an ongoing challenge. In particular, aging at the interface with the charge transport material ...

Wiley2024

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Influence of F-Containing Materials on Perovskite Solar Cells

Likai Zheng

Perovskite solar cells (PSCs) are usually modified and passivated to improve their performance and stability. The interface modification and bulk doping are the two basic strategies. Fluorine (F)-containing materials are highly favored because of their uni ...

2024