Publications associées à Electroacoustic absorbers I: bridging a gap between active acoustic feedback control and shunt loudspeakers

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Impact of beam-coupling impedance on the Schottky spectrum of bunched beam

Tatiana Pieloni, Nicolas Frank Mounet, Christophe Emmanuel R. Lannoy

The Schottky monitors of the Large Hadron Collider (LHC) can be used for non-invasive beam diagnostics to estimate various bunch characteristics, such as tune, chromaticity, bunch profile or synchrotron frequency distribution. However, collective effects, ...

Iop Publishing Ltd2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

Robust tunable acoustic impedance control on electroacoustic resonators for aircraft noise reduction

Maxime Volery

Air traffic noise emissions are responsible for a significant part of the overall environmental noise, especially in the vicinity of airports. Exposure to environmental noise is known to negatively impact health and to be associated with cardiovascular dis ...

EPFL2023

Ultrabroadband sound control with deep-subwavelength plasmacoustic metalayers

Hervé Lissek, Romain Christophe Rémy Fleury, Stanislav Sergeev

Controlling audible sound requires inherently broadband and subwavelength acoustic solutions, which are to date, crucially missing. This includes current noise absorption methods, such as porous materials or acoustic resonators, which are typically ineffic ...

Nature Research2023

Smart acoustic lining for UHBR technologies engine: from the design of an electroacoustic metasurface to experimental characterization under flow

Hervé Lissek, Maxime Volery

The SALUTE project aims at evaluating performance of electroacoustic metasurface, employing a surface array of controlled electroacoustic actuators, for smart acoustic lining under grazing turbulent flow to be used in UHBR Technologies Engines. Theoretical ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2023

Acoustic Levitation apparatus (Robotics Practicals)

Lorenzo Francesco John Noseda, Mahmut Selman Sakar, Amit Yedidia Dolev, Bora Yalcin

The following data contain the information and files, which are required to recreate and build the experimental setup that is described in the Laboratory manual. Further details can be found in the associated publication “A graduate laboratory experiment t ...

Zenodo2023

WINC: A Wireless IoT Network for Multi-Noise Source Cancellation

Haitham Al Hassanieh, Junfeng Guan, Jiaming Wang

This paper introduces Wireless IoT-based Noise Cancellation (WINC) which defines a framework for leveraging a wireless network of IoT microphones to enhance active noise cancellation in noise-canceling headphones. The IoT microphones forward ambient noise ...

Assoc Computing Machinery2023

Observation of non-reciprocal harmonic conversion in real sounds

Hervé Lissek, Romain Christophe Rémy Fleury, Xinxin Guo

Reciprocity guarantees that in most media, sound transmission is symmetric between two points of space when the location of the source and receiver are interchanged. This fundamental law can be broken in non-linear media, often at the cost of detrimental i ...

2023

Robust Collaborative Learning with Linear Gradient Overhead

Rachid Guerraoui, Le Nguyen Hoang, John Stephan, Sadegh Farhadkhani, Nirupam Gupta, Rafaël Benjamin Pinot

Collaborative learning algorithms, such as distributed SGD (or D-SGD), are prone to faulty machines that may deviate from their prescribed algorithm because of software or hardware bugs, poisoned data or malicious behaviors. While many solutions have been ...

PLMR2023

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Samira Alexandra Frey

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

Resonant Transducers Consisting of Graphene Ribbons with Attached Proof Masses for NEMS Sensors

Luis Guillermo Villanueva Torrijo, Daniel Moreno Garcia

The unique mechanical and electrical properties of graphene make it an exciting material for nanoelectromechanical systems (NEMS). NEMS resonators with graphene springs facilitate studies of graphene's fundamental material characteristics and thus enable i ...

Amer Chemical Soc2023

A Front-End CMOS Interface Circuit With High Voltage Charge Pump and Oscillator for Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Zhengwen Jiang, Gian Luca Barbruni, Yihe Zhao

Label-free biosensors, combined with miniaturized micro-electromechanical sensory platforms, offer an attractive solution for real-time and facile monitoring of biomolecules due to their high sensitivity and selectivity without the need for specifically la ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Plasma-based Electroacoustic Actuator for Broadband Sound Absorption

Stanislav Sergeev

Environmental noise, mostly related to human activities, has an immense impact on public health. The development of noise reduction technologies is paramount in addressing this problem. Because of practical and economic reasons, a compact, broadband, light ...

EPFL2022

Corona discharge actuator as an active sound absorber under normal and oblique incidence

Thomas Humbert, Hervé Lissek, Stanislav Sergeev

In the majority of active sound absorbing systems, a conventional electrodynamic loudspeaker is used as a controlled source. However, particular situations may require an actuator that is more resistant to harsh environments, adjustable in shape, and light ...

2022

PID-like active impedance control for electroacoustic resonators to design tunable single-degree-of-freedom sound absorbers

Hervé Lissek, Maxime Volery, Xinxin Guo

Sound absorption at low frequencies still remains a challenge in both scientific research and engineering practice. Natural porous materials are ineffective in this frequency range, as well as acoustic resonators which present too narrow bandwidth of absor ...

2022

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

In flow acoustic characterisation of a 2D active liner with local and non local strategies

Hervé Lissek, Maxime Volery, Gaël Matten

The design and the grazing flow aeroacoustical characterization of a 2D active liner based on an array of electroacoustic absorbers are presented in this paper. The strategy stands on a pressure-based, current-driven digital architecture for impedance cont ...

2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Multiobjective Vector Modulation for Improved Control of NPC-Based Multi-Source Inverters in Hybrid Traction Systems

Andrea Cervone

The concept of a multi-source inverter (MSI) based on NPC topology was recently introduced for hybrid-electric powertrains to connect several dc sources to the traction load in a single conversion stage without magnetics. This work proposes a new modulatio ...

2022