Publications associées à Uni-axial reinforced dielectric elastomer actuators with embedded 3D printed fibers

Publications associées (26)

Methodology for Calibrating Fatigue Load Models for Composite Road Bridges

Current fatigue load models (FLMs) for road bridges are typically calibrated based on steel and reinforced-concrete bridges. These models are not likely applicable to fiber–polymer composite bridges, primarily because the damage rate—defined as the slope o ...

2025

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Influence of fiber orientation on the high cycle tensile fatigue resistance of Ultra-High Performance Fiber Reinforced Cementitious

Eugen Brühwiler, Alain Nussbaumer, Jian Zhan

This paper quantitatively studies the influence of fiber orientation on the high cycle tensile fatigue resistance of ultra-high performance fiber reinforced cementitious composites (UHPFRC) within and beyond elastic domain. Eight tensile fatigue tests and ...

2024

LCM of thermoset-based fiber reinforced composites for large-scale applications: are process kinetics and structural properties antagonistic?

Véronique Michaud

This article reviews the main methods to manufacture large-scale composite parts, with a focus on Liquid Composite Molding techniques of thermoset-based fiber reinforced structural parts. As this process relies on the impregnation of a dry textile stack, t ...

IOP Publishing2023

Novel multi-crack damage approach for pultruded fiber-polymer web-flange junctions

Thomas Keller

This paper aims to propose a novel approach to assess the multi-crack behavior of layered fiber-polymer composites. The Compliance and R-curves generated from this novel approach were useful to understand the multiple delamination process, enabling to eval ...

Elsevier Sci Ltd2023

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview

Anastasios Vassilopoulos

The development of new adhesives has allowed to expand the application of bonding into the most diverse industrial fields. This review article presents the commonly used experimental methods for the investigation of mechanical performance of adhesively bon ...

TAYLOR & FRANCIS LTD2022

Experimental Study on the Static and Fatigue Behaviour of a New Mechanical Wedge-Barrel Anchor

Alain Nussbaumer

Post-tensioned steel strands have been traditionally used in different prestressed structures such as concrete girders, post-tensioned concrete slabs, cable-stayed bridges, post-tensioned walls, etc. for a long time. However, due to the vulnerability of st ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Combined Shear-Flexural Verification Of In Plane Loaded Reinforced And Unreinforced Masonry Walls

Lorenzo Benedetti

The safety verification of in-plane loaded masonry panels requires the evaluation of at least three different collapse conditions connected with overturning, shear sliding, and shear - compression failure at the panels' toe. In reinforced panels, the resis ...

INT CENTER NUMERICAL METHODS ENGINEERING2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020

TiO2- based ceramics, from basic science to applications

Lidia Rocoffort de Vinnière

Nanomaterials and nanoparticles are nowadays used in a wide range of applications; from sunscreens, paint and food industry to catalytic processes, lighting, TV's and displays, their presence is percolating in our daily life. New applications rise every da ...

EPFL2020

Next generation synthetic fibers UHPFRC for sustainable structural applications

Amir Hajiesmaeili

The ever-increasing demand for rehabilitation of existing structures and construction of new ones, along with environmental issues of the construction sites represent a heavy burden for society in terms of economy and environment. Meanwhile, Ultra-High Per ...

EPFL2019

Dynamically reconfigurable DEAs incorporating shape memory polymer fibers

Herbert Shea, Bekir Aksoy

We present variable stiffness dielectric elastomer actuators (DEAs), combining a single DEA actuator with embedded shape memory polymer (SMP) fibers, which can be electrically addressed to locally reduce the stiffness by a factor of 100. The device accommo ...

SPIE-INT SOC OPTICAL ENGINEERING2019

Numerical simulation of two-dimensional crack propagation

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

A numerical investigation was carried out to simulate the experimental results previously obtained concerning two-dimensional in-plane crack propagation in laminated glass fiber-reinforced polymer (GFRP) plates. The plates were designed with an embedded ci ...

2018

Studies on Traction Separation Relations in Fracture of Layered Composites : Experiments and Modeling

Georgios Pappas

Layered fiber reinforced composite materials are prone to fracture in planes parallel to the direction of fibers leading to extensive delamination or intralaminar fracture. This phenomenon of crack propagation is frequently accompanied by significant incre ...

EPFL2017

The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II - Modeling

Véronique Michaud, John Botsis, Georgios Pappas

This article reports modeling techniques and results based on experimental Mode I characterization of a layered woven GFRP material with tufting reinforcement. Standard tuft and loop-less geometries are investigated on three different areal patterns to eva ...

Elsevier2017

Curing kinetics and thermomechanical properties of latent epoxy/carbon fiber composites

Jan-Anders Edvin Maansson, Véronique Michaud, Pierre-Etienne Bourban, Sara Dalle Vacche

In this work, resins based on diglycidyl ether of bisphenol A (DGEBA) epoxy and a latent hardener, dicyandiamide (DICY), as well as carbon fiber (CF) composites based on them, were prepared with three commercial accelerators: a methylene bis (phenyl dimeth ...

Iop Publishing Ltd2016

Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens

John Botsis, Joël Cugnoni, Ebrahim Farmand Ashtiani

Fatigue delamination growth in composites is accompanied by large scale bridging (LSB) that yields important toughening effects. However, the extent of this mechanism depends on the laminate geometry rendering its modeling a challenging task. This work pre ...

Elsevier2016