Publications associées à Tempering effects on three martensitic carbon steels studied by mechanical spectroscopy

Publications associées (36)

Additive Manufacturing of Metal Matrix Composites for Space Applications

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

EPFL2025

Thermomechanical constitutive modeling of the Kirigami-inspired shape memory alloy

Yves Perriard, Thomas Guillaume Martinez, Marjan Ghorbani, Xinxin Liao

Shape memory alloys (SMAs) are unique materials capable of recovering predefined shapes through reversible phase transformations between austenite and martensite phases. This behavior enables SMAs to exhibit the shape memory effect and pseudoelasticity, al ...

2025

Formation mechanism and microstructural characteristics of a body-centered cubic phase in 3D printed 316L–CuCrZr multi-material structures, combining laser powder bed fusion with foils

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Seyed Amirmohammad Jamili

Additive manufacturing of 316L/CuCrZr multi-material metallic structures has recently attracted significant attention, due to the ideal combination of structural and thermal/electrical properties. In this work, a unique multi-phase microstructure was produ ...

2025

Acoustic emission signature of martensitic transformation in laser powder bed fusion of Ti6Al4V-Fe, supported by operando X-ray diffraction

Roland Logé, Jamasp Jhabvala, Mathijs Pieter van der Meer, Milad Hamidi Nasab, Reza Esmaeilzadeh, Claire Navarre, Charlotte Léopoldine de Formanoir de la Cazerie, Lucas Maximilian Schlenger

This study focuses on investigating Acoustic Emission (AE) monitoring in the Laser Powder Bed Fusion (LPBF) process, using premixed Ti6Al4V-(x wt%) Fe, where x = 0, 3, and 6. By employing a structure-borne AE sensor, we analyze AE data statistically, uncov ...

2024

Implementing water recirculation in a novel portable plasma-activated water reactor enhances antimicrobial effect against Escherichia coli

Ivo Furno, Alan Howling, Fabio Avino, Rita Agus, Brayden Graham Myers, Lorenzo Ibba

The need for sustainable and reliable decontamination methods is driven by concerns regarding antibiotic resistance, as well as environmental and cost -efficiency challenges associated with traditional methods. Plasmaactivated water (PAW) holds significant ...

Elsevier Science Sa2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Stabilization versus competing de-metalation, trans-metalation and (cyclo)-dehydrogenation of Pd porphyrins at a copper surface

Francesco Armillotta

Metal-porphyrins are studied intensively due their potential applications, deriving from the variety of electronic and chemical properties, tunable by selecting metal centers and functional groups. Metalation, de- and trans-metalation processes are fundame ...

Royal Soc Chemistry2024

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Elyas Ghafoori, Christian Leinenbach, Irene Ferretto

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

Philippe Buffat

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

Ion Spectroscopy Reveals Structural Difference for Proteins Microhydrated by Retention and Condensation of Water

Oleg Boyarkine, Andrei Zviagin

Protein ubiquitin in its +7 charge state microhydrated by 5 and 10 water molecules has been interrogated in the gas phase by cold ion UV/IR spectroscopy. The complexes were formed either by condensing water onto the unfolded bare proteins in a temperature- ...

Amer Chemical Soc2024

A compact approach to higher-resolution resonant inelastic x-ray scattering detection using photoelectrons

Henrik Moodysson Rønnow

The detection of inelastically scattered soft x-rays with high energy resolution usually requires large grating spectrometers. Recently, photoelectron spectrometry for analysis of x-rays (PAX) has been rediscovered for modern spectroscopy experiments at sy ...

Iop Publishing Ltd2024

Solute-strengthening in metal alloys with short-range order

William Curtin, Shankha Nag

Recent surging interest in strengthening of High Entropy Alloys (HEAs) with possible chemical ordering motivates the development of new theory. Here, an existing theory for random alloys that accounts for solute-dislocation and solute–solute interactions i ...

2024

Characterization of low-temperature creep and stress relaxation of an iron-based shape memory alloy (Fe-SMA) using in-situ synchrotron diffraction

Christian Leinenbach, Meet Jaydeepkumar Oza

Iron-based shape memory alloys (Fe-SMAs) are e-merging materials with extensive application in civil structures owing to their unique properties, including the shape memory effect. However, it is crucial to understand the time dependent behavior of Fe-SMAs ...

ELSEVIER SCI LTD2024

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

This data package supports the publication 'Complexity of crack front geometry enhances toughness of brittle solids' by Xinyue Wei, Chenzhuo Li, Cían McCarthy, and John M. Kolinski Nature physics (2024) - https://doi.org/10.1038/s41567-024-02435-x DOI: 1 ...

Zenodo2024

Quantification of Native Lignin Structural Features with Gel-Phase 2D-HSQC0 Reveals Lignin Structural Changes During Extraction

Jeremy Luterbacher, Stefania Bertella, Claire Laura Marion Charline Bourmaud

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature H-1-C-13 Heteronuclear S ...

Wiley-VCH Verlag GmbH2024

Revealing the Structure of Tryptophan in Microhydrated Complexes by Cold Ion Spectroscopy

Oleg Boyarkine, Natalia Nagornova, Manuel Dömer, Andrei Zviagin, Ruslan Yamaletdinov

The geometry of biomolecules isolated in the gas phaseusuallydiffers substantially from their native structures in aqueous solution,which are the only ones truly relevant to life science. To connectthe high resolution of cold ion spectroscopy that can be a ...

2023

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

NMR Crystallography in the Big Data Era: New Methods and Applications Powered by Machine Learning

Manuel Cordova

Structure determination of materials is key to understanding their physical properties. While single-crystal X-ray diffraction is the gold standard for structures displaying long-range order, many materials of interest are polycrystalline and/or disordered ...

EPFL2023