Publications associées à Pressure drop of the ITER PFCI cable-in-conduit conductor

Publications associées (26)

Investigation of Hydrogen Behaviour in Irradiated Zirconium-Based Fuel Claddings by Neutron Imaging and Complementary Techniques

Zirconium-based cladding tubes, mainly used as fuel cladding materials in light water reactors, serve as the primary barrier insulating the radioactive fission products from the environment. During operation, the cladding interacts with the coolant water, ...

EPFL2024

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Systematic Sensitivity and Uncertainty Analysis of Sodium-Cooled Fast Reactor Systems

Friederike Bostelmann

Sodium-cooled fast reactor (SFR) technologies have the potential to guarantee energy supply and to reduce the burden of nuclear waste for future generations. For an adequate simulation of these reactor systems, well-established tools that have so far been ...

EPFL2020

Development of Advanced Methodologies for Monitoring and Modelling of Neutron Noise in Modern LWR Cores

Dionysios Chionis

Nuclear reactors are inherently stochastic systems, in which neutronic and thermal-hydraulic parameters fluctuate continuously even during steady-state conditions. In addition, structural components vibrate due to the coolant hydraulic forces. This stochas ...

EPFL2020

High-Temperature Water Effects on the Fracture Behaviour of Low-Alloy Reactor Pressure Vessel Steels

Zaiqing Que

The structural integrity of the reactor pressure vessel (RPV) of light water reactors (LWR) is of utmost importance regarding operation safety and lifetime. High-temperature water (HTW) and hydrogen absorbed from environment, in synergy with irradiation em ...

EPFL2019

Parametric sensitivity in the Sabatier reaction over Ru/Al2O3 - theoretical determination of the minimal requirements for reactor activation

Andreas Züttel, Noris André Gallandat, Emanuele Moioli

The methanation of carbon dioxide is an option for chemical storage of renewable energy together with greenhouse gas reutilization because it offers a product with a high energy density. The reaction CO2 + 4H(2) CH4 + 2H(2)O is performed on a Ru/Al2O3 cata ...

ROYAL SOC CHEMISTRY2019

Effect of dynamic strain ageing on environmental degradation of fracture resistance of low-alloy RPV steels in high-temperature water environments

Philippe Spätig, Hans-Peter Seifert, Zaiqing Que

Elastic plastic fracture mechanics tests on different low-alloy reactor pressure vessel (RPV) steels in air and various simulated light water reactor environments revealed a clear, but moderate reduction of the fracture initiation resistance of RPV steels ...

2019

A Kinetic Map of the Homomeric Voltage-Gated Potassium Channel (Kv) Family

Henry Markram, Rajnish Ranjan, Emmanuelle Logette, Enrico Scantamburlo, Michela Marani, Valérie Buchillier, Mirjia Herzog

The voltage-gated potassium (Kv) channels, encoded by 40 genes, repolarize all electrically excitable cells, including plant, cardiac, and neuronal cells. Although these genes were fully sequenced decades ago, a comprehensive kinetic characterization of al ...

2019

A versatile and membrane-less electrochemical reactor for the electrolysis of water and brine

Demetri Psaltis, Christophe Moser, Pooria Hadikhani, Enrico Chinello

Renewables challenge the management of energy supply and demand due to their intermittency. A promising solution is the direct conversion of the excess electrical energy into valuable chemicals in electrochemical reactors that are inexpensive, scalable, an ...

2019

Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel

Ignasi Villacampa Roses

The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...

EPFL2018

Bayesian Uncertainty Quantification of Physical Models in Thermal-Hydraulics System Codes

Damar Canggih Wicaksono

Nuclear thermal-hydraulics (TH) system codes use several parametrized physical or empirical models to describe complex two-phase flow phenomena. The reliability of their predictions is as such primarily affected by the uncertainty associated with the param ...

EPFL2018

Modelling of fuel fragmentation, relocation and dispersal during Loss-of-Coolant Accident in Light Water Reactor

Vladimir Vladimirov Brankov

Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...

EPFL2017

An experimental study on flow boiling pressure drop in multi-microchannel evaporators with different refrigerants

John Richard Thome, Houxue Huang

A key parameter in designing two-phase flow systems for the cooling of high heat flux electronics is the pressure drop in microchannel evaporators. As a result, an experimental study was performed to investigate the flow boiling pressure drop of refrigeran ...

Elsevier Science Inc2017

Innovative low-mass cooling systems for the ALICE ITS Upgrade detector at CERN

Manuel Gómez Marzoa

The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...

EPFL2016

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Pierluigi Bruzzone

A thermal-hydraulic model has been developed for the novel cable-in-conduit conductor (CICC) recently proposed by ENEA, which foresees the use of 2nd Generation REBCO-based Coated Conductor tapes stacked into twisted grooves slotted into an Al core. A cent ...

IEEE Institute of Electrical and Electronics Engineers2016

Heat Management for Process Intensification of Fast Exothermic Reactions in Microstructured Reactors

Julien Haber

Nowadays, the production in fine chemical and pharmaceutical industry is mostly carried out in large scale batch reactors having typically dimensions of a few meters to satisfy the demand of the market. Even though this technology has been widely used and ...

EPFL2013

Multi-injection microstructured reactor for intensification of fast exothermic reactions: proof of concept

Albert Renken, Lioubov Kiwi, Thomas Maeder, Bo Jiang, Julien Haber

Quasi-instantaneous exothermic reactions lead to the formation of unwanted hot spots even when carried out in conventional microstructured reactors (MSR) with tube diameter of 100 − 1000 μm. For this reason, alternative MSR designs are warranted to enable ...

Walter de Gruyter2013

Neutronics Experiments and Analysis Related to Strong Moderation Heterogeneity in LWRs

The Supercritical-Water-Cooled Reactor (SCWR) is the Generation IV reactor concept most closely related to current light water reactors (LWRs). The SCWR builds on the vast experience with today's LWRs and supercritical coal-fired power plants. Water at sup ...

EPFL2012

Analysis of Advanced Sodium-cooled Fast Reactor Core Designs with Improved Safety Characteristics

In order to meet the steadily increasing worldwide energy demand, nuclear power is expected to continue playing a key role in electricity production. Currently, the large majority of nuclear power plants are operated with thermal-neutron spectra and need r ...

EPFL2012

Experimental Comparisons of 3D Reconstructed Pin-Power Distributions in Full-Scale BWR Fuel Assemblies

Rakesh Chawla

In this paper, reconstructed local fission rates obtained with the two-group nodal diffusion program PRESTO-2, used at the Leibstadt Nuclear Power Plant (KKL) in Switzerland, are compared with experimental results and MCNPX calculations. The experimental f ...

2011