Publications associées à Computational rule-based approach for corner correction of non-Manhattan geometries in mask aligner photolithography

Publications associées (25)

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Combining biophysical models and machine learning to optimize implant geometry and stimulation protocol for intraneural electrodes

Silvestro Micera, Simone Romeni

Objective. Peripheral nerve interfaces have the potential to restore sensory, motor, and visceral functions. In particular, intraneural interfaces allow targeting deep neural structures with high selectivity, even if their performance strongly depends upon ...

IOP Publishing Ltd2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Controlling motion at the nanoscale with light

Mintae Chung

Optical manipulation at the micro- nano-scale is a fascinating topic due to its inherent non-invasive properties and multifaceted applications in various fields such as biology, sensing, micro-fluidics, and micro- nano-robotics. This thesis involves intens ...

EPFL2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Edge-Contact MoS2 Transistors Fabricated Using Thermal Scanning Probe Lithography

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio

The science and engineering of two-dimensional materials (2DMs), in particular, of 2D semiconductors, is advancing at a thriving pace. It is well known that these delicate few-atoms thick materials can be damaged during the processing toward their integrat ...

2022

Femtosecond laser-based optomechanical processes for permanent and high-precision fine alignment of optical systems

Saood Ibni Nazir

Miniaturization has been at the forefront of scientific research in the past decade covering diverse areas such as electronics, mechanics, and optics. While 'small is beautiful' may be a vast generalization, the true benefits of miniaturization are especia ...

EPFL2021

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

Olivier Martin, Christian Santschi, Banafsheh Abasahl

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resis ...

IOP PUBLISHING LTD2021

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...

EPFL2021

FABRICATION AND ANALYSIS OF THIN FILM LITHUM NIOBATE RESONATORS FOR 5GHz FREQUENCY AND LARGE k(t)(2) APPLICATIONS

Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli, Seniz Esra Küçük

This work presents the fabrication and analysis of suspended thin film Lithium Niobate resonators. The yield of the new fabrication process presented below is >90% showing devices with high k(t)(2) of 28% resonators at 5GHz, making them suitable for high f ...

IEEE2021

Shining Diamond: from Micro- and Nano-Engineering to Quantum Photonics

Sichen Mi

The discovery of room-temperature single photon emission from color centers in diamond has in recent years boosted research interest in this renowned material in photonics and quantum community and beyond. Following understanding some basic principles of h ...

EPFL2021

Increasing Superstructure Optimization Capacity Through Self-Learning Surrogate Models

François Maréchal, Ivan Daniel Kantor, Julia Granacher

Simulation-based optimization models are widely applied to find optimal operating conditions of processes. Often, computational challenges arise from model complexity, making the generation of reliable design solutions difficult. We propose an algorithm fo ...

2021

Computational tool for stock-constrained design of structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Jonas Warmuth

Designing structures from reused elements is becoming an increasingly important design task for structural engineers as it has potential to significantly reduce adverse environmental impacts of building structures. To allow for a broad application of this ...

2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Systematic Method for the Energy-Saving Potential Calculation of Air Conditioning Systems via Data Mining. Part II: A Detailed Case Study

Shen Yang, Xianlin Wang

Increased data monitoring enables the energy-efficient operation of air-conditioning systems via data-mining. The latter is projected to have lesser consumption but more comprehensive diagnosis than traditional methods. Following the companion paper that p ...

2021

Data-Driven Convergence Prediction of Astrobots Swarms

Denis Gillet, Jean-Paul Richard Kneib, Matin Macktoobian

Astrobots are robotic artifacts whose swarms are used in astrophysical studies to generate the map of the observable universe. These swarms have to be coordinated with respect to various desired observations. Such coordination\footnote{\z{A coordination sa ...

2022

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021

Template-assisted electrodeposition of nickel and nickel copper 3D microcomponents

Patrik Schürch

New types of metamaterials and architectured material require metallic materials with precise structural design in the microscale. However, additivemanufacturing of metallic structures in themicroscale has proven difficult, as the demand for the material q ...

EPFL2020

Thermomechanical Nanocutting of 2D Materials

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Samuel Tobias Howell

Atomically thin materials, such as graphene and transition metal dichalcogenides, are promising candidates for future applications in micro/nanodevices and systems. For most applications, functional nanostructures have to be patterned by lithography. Devel ...

Wiley2020