Publications associées à Chemo-mechanical behaviour of a low activity clay

Evolution of water content and suction of Opalinus Clay from recovery at the drilling site to handling in the laboratory

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

Advanced geotechnical engineering applications, such as shale gas extraction, CO2 geological sequestration, and geological radioactive waste storage, often involve various types of shales located at significant depths. Shales exhibit mechanical properties ...

Pergamon-Elsevier Science Ltd2024

Crystal, defect, and morphology engineering of porous two-dimensional materials for ionic separation

Heng-Yu Chi

Ordered two-dimensional (2D) materials hosting Å-scale pores are highly promising for enabling challenging separation, thanks to well-defined pore geometry resulting in tight confinement of ions when hosted inside the pore. In addition, the 2D nature of th ...

EPFL2024

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Corentin Jean-Marie Rémi Noël

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

The impact of different methods of increasing the intensity of compassion in engineering ethics cases

Roland John Tormey, Nihat Kotluk

Despite the growing interest in emotions in engineering education, empirical research on incorporating them into engineering ethics education is limited. Therefore, we designed this experimental study to assess how different methods for integrating compass ...

2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Modeling the mechanics and rheology of porous and granular media: an elastoplastic continuum approach

Lars Kristoffer Uhlen Blatny

The complex mechanics of porous and granular media play a significant role in various industrial processes and natural phenomena. As an example, understanding the mechanics of how failure occurs, localizes and propagates in porous brittle solids under vari ...

EPFL2023

Pore-pressure coefficients for unsaturated soils: generalized effective stress approach

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

Geotechnical problems with total stress changes occurring rapidly relative to the soil consolidation time can be conveniently addressed using an effective stress-based approach. For saturated states, analytical formulations of pore-pressure coefficients ad ...

CANADIAN SCIENCE PUBLISHING2023

Data-driven 1D wave propagation for site response analysis

Jean-François Molinari, Sacha Zenon Wattel, Antonio Joaquin Garcia Suarez

Prediction of ground motion triggered by earthquakes is a prime concern for both the seismology community and geotechnical earthquake engineering one. The subfield occupied with such a problem is termed site response analysis (SRA), its one-dimensional fla ...

WILEY2023

Drained Clay-Pipe Interface Resistance at Low Normal Stresses and Elevated Temperatures

Roba Houhou

Offshore pipelines that transport hydrocarbons under high pressure and high temperature are usually thermally insulated to maintain an elevated temperature and prevent any heat loss to the surroundings. However, the temperatures at the outer-wall of the pi ...

AMER SOC CIVIL ENGINEERS2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

A fully-coupled highly-parallelized geomechanical simulator for assessing induced seismicity

Jean-François Molinari, Guillaume Anciaux, Nicolas Richart, Brice Tanguy Alphonse Lecampion, Emil Gallyamov

Induced seismicity caused by anthropogenic modification of the subsurface effective stress state has been observed in a number of industrial applications -- from hydrocarbon extraction (e.g., Groningen [1]), drilling waste-water disposal (e.g., [2]) to the ...

2023

Self-sustained dynamics and forced resonant oscillations in flows: cross-junction jets and sloshing liquids

Alessandro Bongarzone

In engineering, oscillatory instabilities and resonances are often considered undesirable flow features and measures are taken to avoid them. This may include avoiding certain parametric regions or implementing control and mitigation strategies. However, t ...

EPFL2023

Splitting probabilities and mean first-passage times across multiple thresholds of jump-and-drift transition paths

Paolo Perona, Giulio Calvani

We apply the stochastic-trajectory analysis to derive exact expressions for the mean first passage times of jump-and-drift transition paths across two or more consecutive thresholds. We perform the analysis of the crossing statistics in terms of dimensionl ...

2023

Thermal Conditions in Indoor Environments: Exploring the Reasoning behind Standard-Based Recommendations

Dolaana Khovalyg

Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountabili ...

2023

How to Make Elastomers Piezoelectric?

Frank Nüesch, Francis Owusu

Piezoelectrics play a significant role in modern electronics and electric devices. Thermal or mechanical stress on such materials induces a change in polarization generating an electric response, which is the sole effect of why they are so interesting. How ...

Wiley2023

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

Size dependence of second-harmonic scattering from nanoparticles: Disentangling surface and electrostatic contributions

Arianna Marchioro, Sylvie Roke, Bingxin Chu

Polarimetric angle-resolved second-harmonic scattering (AR-SHS) is an all-optical tool enabling the study of unlabeled interfaces of nano-sized particles in an aqueous solution. As the second harmonic signal is modulated by interference between nonlinear c ...

AIP Publishing2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Experimental investigation of rotational behavior of pseudo-ductile adhesive angle joints exhibiting variable strain rate

Thomas Keller, Abdolvahid Movahedirad, Ghazaleh Eslami

Pseudo-ductile behavior in composite structural frames can be achieved by enabling their beam-column joints to exhibit nonlinear structural response due to progressive damage, by using pseudo-ductile adhesives. This study investigates the static behavior o ...

2023