Publications associées à A 2.4-GHz low complexity polar transmitter using dynamic biasing for IEEE 802.15.6

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Kai Huang, Chen Yang, Mikhail Churaev, Xinru Ji, Yang Chen, Zihan Li, Alisa Davydova, Xi Wang, Junyin Zhang

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Yimai Peng, Li Xu, Kyojin Choo

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Three-wave-mixing quantum-limited kinetic inductance parametric amplifier operating at 6 T near 1 K

Camille René Charles Roy, Simone Frasca, Guillaume Beaulieu, Pasquale Scarlino

Parametric amplifiers play a crucial role in modern quantum technology by enabling the enhancement of weak signals with minimal added noise. Traditionally, Josephson junctions have been the primary choice for constructing parametric amplifiers. Nevertheles ...

American Physical Society (APS)2024

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Ultra-Low Power Short-Range 60-GHz FMCW Radar Front-End

Sammy Cerida Rengifo

The millimeter wave (mmWave) frequency band is becoming very interesting over the past years because it provides the opportunity to operate using large bandwidths which are not available at lower frequencies. This enables new communication standards suppor ...

EPFL2023

Fab-to-fab and run-to-run variability in 130 nm and 65 nm CMOS technologies exposed to ultra-high TID

Jean-Michel Sallese, Adil Koukab, Stefano Michelis, Gennaro Termo

The discovery of a large fab-to-fab variability in the TID response of the CMOS technologies used in the design of ASICs for the particle detectors of the HL-LHC triggered a monitoring effort to verify the consistency of the CMOS production process over ti ...

IOP Publishing Ltd2023

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Samira Alexandra Frey

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Computational Imaging SPAD Cameras

Andrei Ardelean

Vision systems built around conventional image sensors have to read, encode and transmit large quantities of pixel information, a majority of which is redundant. As a result, new computational imaging sensor architectures were developed to preprocess the r ...

EPFL2023

A 0.21-ps FOM Capacitor-Less Analog LDO with Dual-Range Load Current for Biomedical Applications

Mahsa Shoaran, Yasemin Engür

This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfa ...

ArXiv2023

An All-Digital 1 Mbps, 57 pJ/bit Bluetooth Low Energy (BLE) Backscatter ASIC in 65 nm CMOS

James Daniel Rosenthal

We present an all-digital application specific integrated circuit (ASIC) that implements Bluetooth Low Energy (BLE)-compatible backscatter communication. The ASIC was fabricated in a 65 nm CMOS process and occupies an active area of 0.12 mm(2) while consum ...

IEEE2022

High-Performance CMOS SPAD-Based Sensors for Time-of-Flight PET Applications

Francesco Gramuglia

Detecting light, photon by photon, has been possible since the 1930s, with the invention of the photomultiplier tube (PMT). However, it is only since the 1970s, that solid-state single-photon detectors have emerged and only since 2003 that a new technology ...

EPFL2022

A Cryo-CMOS Wideband Quadrature Receiver With Frequency Synthesizer for Scalable Multiplexed Readout of Silicon Spin Qubits

Edoardo Charbon, Andrea Ruffino, Yatao Peng

In this article, a cryo-CMOS receiver integrated with a frequency synthesizer for scalable multiplexed readout of qubits is presented, focusing on radio frequency (RF) reflectometry readout of silicon-based semiconductor spin qubits/quantum dots. The propo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Nanoplasma-based Millimiter-wave Modulators on a Single Metal Layer

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

Fundamental constraints imposing power-frequency trade-offs in conventional electronics have stimulated research on alternative technologies for millimeter-wave and sub-millimeter-wave applications. In this work, we use the picosecond threshold firing of n ...

Institute of Electrical and Electronics Engineers2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Franco Maloberti, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

New Technologies to Enhance the Figures-of-Merit of GaN Power Devices

Luca Nela

Gallium Nitride (GaN) has enabled groundbreaking developments in the field of optoelectronics and radio frequency communication. More recently, GaN devices for power conversion applications have demonstrated excellent potential. Thanks to Gallium Nitride w ...

EPFL2022

Exploring negative capacitance and neuromorphic devices based on CMOS-compatible ferroelectric HfO2

Carlotta Gastaldi

Ferroelectric materials are explored for numerous applications thanks to their properties associated with electrically switchable spontaneous polarization. Perovskites are an established class of ferroelectrics used for sensors and actuators. However, they ...

EPFL2022

Theoretical Efficiency and Dosimetry of Buffered On-body Transmitter Antennas for Wireless Powering of In-body Devices

Anja Skrivervik, Denys Nikolayev

The viable and safe application of wireless power transfer for powering bioelectronic implants requires understanding the wave propagation in heterogeneous and dispersive media, the electromagnetic exposure assessment, and the optimum design of the system ...

IEEE2022