Publications associées à Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Publications associées (29)

Multilayer diffusion-barrier composites based on microfibrillated cellulose from wood, bacterial and algae sources

This work is driven by the effort towards increased environmental sustainability and aims to develop a new food packaging material based on renewable materials, and more specifically cellulose as the most abundant biomass resource on Earth. Focus was on mi ...

EPFL2024

In-Situ FTIR and Laser Induced Fluorescence RONS Characterization of Atmospheric Pressure Nanosecond-Pulsed Surface DBD Plasma for Indirect Treatments of E. Coli

Ivo Furno, Fabio Avino, Rita Agus, Lorenzo Ibba

We study the bactericidal efficacy of surface dielectric barrier discharge low-temperature plasma treatments, powered by nanosecond high voltage pulses. We achieve similar to 4-log reduction in Escherichia coli population, after 10 min treatments, at a dis ...

Springer2024

Comparison of selected surface level ERA5 variables against in‐situ observations in the continental Arctic

Julia Schmale, Jakob Boyd Pernov

In this study, data from 17 ground-based, continental Arctic observatories areused to evaluate the performance of the European Centre for Medium-RangeWeather Forecasts Reanalysis version 5 (ERA5) reanalysis model. Three aspectsare evaluated: (i) the overal ...

2024

Implementation of the ISORROPIA-lite aerosol thermodynamics model into the EMAC chemistry climate model (based on MESSy v2.55): implications for aerosol composition and acidity

Athanasios Nenes

This study explores the differences in performance and results by various versions of the ISORROPIA thermodynamic module implemented within the ECHAM/MESSy Atmospheric Chemistry (EMAC) model. Three different versions of the module were used, ISORROPIA II v ...

Copernicus Gesellschaft Mbh2024

Dataset for '3D printing of customizable transient bioelectronics and sensors'

Danick Briand, Nicolas Francis Fumeaux

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “3D printing of customizable transient bioelectronics and sensors”. This work aims to study and demonstrate ...

Zenodo2024

Modular Multiplatform Compatible Air Measurement System (MoMuCAMS): a new modular platform for boundary layer aerosol and trace gas vertical measurements in extreme environments

Julia Schmale, Andrea Baccarini, Roman Pohorsky

The Modular Multiplatform Compatible Air Measurement System (MoMuCAMS) is a newly developed in situ aerosol and trace gas measurement platform for lower-atmospheric vertical profiling. MoMuCAMS has been primarily designed to be attached to a Helikite, a ru ...

2024

Squalene Depletion in Skin Following Human Exposure to Ozone under Controlled Chamber Conditions

Shen Yang

A major component of human skin oil is squalene, a highly unsaturated hydrocarbon that protects the skin from atmospheric oxidants. Skin oil, and thus squalene, is continuously replenished on the skin surface. Squalene is also quickly consumed through reac ...

Amer Chemical Soc2024

Temperature, humidity, and ionisation effect of iodine oxoacid nucleation

Andrea Baccarini, Lubna Dada

Iodine oxoacids are recognised for their significant contribution to the formation of new particles in marine and polar atmospheres. Nevertheless, to incorporate the iodine oxoacid nucleation mechanism into global simulations, it is essential to comprehend ...

Royal Soc Chemistry2024

Eco-Conscious Approach to Wireless Gas Monitoring With a Hybrid Printed Passive Sensor Tag

Sandro Carrara, Johanna Zikulnig

Addressing the environmental impact of electronic waste in biomedical sensing, an eco-conscious approach to the realization of a Chitosan-based Acetone sensor tag for wireless gas monitoring is presented. The fabrication involves inkjet printing of silver ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Characterization of low-temperature plasmas generated by dielectric barrier discharges for bacterial inactivation

Lorenzo Ibba

Low-temperature plasmas (LTPs) at atmospheric pressure hold great promise for disinfection and sterilization applications. When compared to traditional sterilization technologies like autoclaving, LTPs may offer several benefits, including reduced energy c ...

EPFL2024

Nanocluster aerosol formation via ozone chemistry on worn clothing: Influence of environmental parameters

Dusan Licina, Shen Yang

Nanocluster aerosols (NCA, particles

Pergamon-Elsevier Science Ltd2024

Co-Adsorption of Alcohols and Water in JUK-8 Studied Using Quasi-Equilibrated Thermodesorption

Pattaraphon Rodlamul

JUK-8 ([Zn(oba)(pip)]n, oba2- = 4,4 '-oxybis(benzenedicarboxylate), pip = 4-pyridyl-functionalized benzene-1,3-dicarbohydrazide) is a hydrolytically stable flexible metal-organic framework. Owing to its unusual adsorptive properties, JUK-8 can be considere ...

MDPI2024

Stability of influenza A virus in droplets and aerosols is heightened by the presence of commensal respiratory bacteria

Athanasios Nenes, Tamar Kohn, Kalliopi Violaki, Ghislain Gilles Jean-Michel Motos, Aline Laetitia Schaub, Shannon Christa David, Walter Hugentobler, Htet Kyi Wynn, Céline Terrettaz, Laura José Costa Henriques

Aerosol transmission remains a major challenge for control of respiratory viruses, particularly those causing recurrent epidemics, like influenza A virus (IAV). These viruses are rarely expelled alone, but instead are embedded in a consortium of microorgan ...

American Society for Microbiology2024

Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies

Leticia de Sousa, Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely

Worldwide, electronic waste represents the fastest-growing stream of waste. With an increasing number of connected devices, passive and eco-friendly environmental sensing solutions need to be developed. Wireless passive devices for RFID and sensing exist, ...

2023

A Sustainable Printed Chitosan-Based Sensor for Acetone Detection

Sandro Carrara, Johanna Zikulnig

Biomedical sensing applications, including breath analysis, contribute to increasing the amount of electronic waste, as the sensors are frequently disposed, due to hygienic considerations. Consequently, the development of sustainable sensor solutions is cr ...

IEEE2023

Organic electrochemical transistors printed from degradable materials as disposable biochemical sensors

Danick Briand, Nicolas Francis Fumeaux, Silvia Demuru, Claudio Pinto Almeida

Transient electronics hold promise in reducing electronic waste, especially in applications that require only a limited lifetime. While various degradable electronic and physical sensing devices have been proposed, there is growing interest in the developm ...

Nature Research2023

Uncertainty analysis of polymer-based capacitive relative humidity sensor at negative temperatures and low humidity levels

Sandro Carrara, Amar Kapic

Capacitive relative humidity sensors, widely used in industrial and environmental applications, should be interchangeable and ideally have parametrizable response to relative humidity changes. While the effects of temperatures in the range between 0 degree ...

ELSEVIER SCI LTD2023

Dataset for "Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies"

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Leticia de Sousa

This dataset contains the data collected during the SNSF BRIDGE GREENsPACK project (Grant no. 40B2-0_187223) in association with the recent publication entitled “Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequen ...

Zenodo2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

Temperature and relative humidity in 10 min time resolution measured in the interstitial inlet of the Swiss container during MOSAiC 2019/2020

Julia Schmale, Benjamin Jérémy Laurent Heutte

This dataset contains the temperature and relative humidity in a bypass to the interstitial inlet, measured during the MOSAiC expedition from October 2019 to September 2020. The measurements were performed in the bypass of the interstitial inlet of the Swi ...

Zenodo2023