Publications associées à Realizing Uniform Defect Passivation via Self‐Polymerization of Benzenesulfonate Molecules in Perovskite Photovoltaics

Publications associées (28)

Localized Tunneling 1D Perovskitoid Passivated Contacts for Efficient and Stable Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Yong Ding, Kai Zhang

Interface engineering has proven to be an effective approach for passivating interfacial imperfections to mitigate non-radiative recombination, but the subpar interface quality between the perovskite and the charge transport layer has hindered advancements ...

2025

Solar photons beyond the band gap wavelengths: their effect on solution-processed solar cells

Michael Graetzel

A deep understanding of how solution-processed solar cells (SSCs) perform under varying temperatures and irradiance is crucial for their optimal design, synthesis, and use. However, current partial spectral characterization, primarily below the band gap wa ...

Royal Society of Chemistry2025

Optical assessment of lignin-containing nanocellulose films under extended sunlight exposure

Tiffany Abitbol

This study investigates the stability and UV-blocking properties of cellulose nanofibril (CNF) and TEMPO-oxidized cellulose nanofibril (TOCNF) films, with and without lignin, under 1000 h of artificial sunlight. The literature to date provides no quantitat ...

SPRINGER2025

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

Simon Baptiste Rieckhoff

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

WILEY2025

Triarylamine Trisamide Interfacial Modulation for Perovskite Photovoltaics

Runzhong Zhang, Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Ghewa Alsabeh

Hybrid perovskites stand out as one of the leading materials in the new generation of photovoltaics. Their stability under operating conditions, however, remains an ongoing challenge. In particular, aging at the interface with the charge transport material ...

Wiley2024

Influence of F-Containing Materials on Perovskite Solar Cells

Likai Zheng

Perovskite solar cells (PSCs) are usually modified and passivated to improve their performance and stability. The interface modification and bulk doping are the two basic strategies. Fluorine (F)-containing materials are highly favored because of their uni ...

2024

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells

Christophe Ballif, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techni ...

2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

Ion Transport at Polymer-Argyrodite Interfaces

Nicola Marzari, Sokseiha Muy

Solid-state electrolytes, particularly polymer/ceramic composite electrolytes, are emerging as promising candidates for lithium-ion batteries due to their high ionic conductivity and mechanical flexibility. The interfaces that arise between the inorganic a ...

2024

Supramolecular Modulation for Hybrid Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Hong Zhang, Jovana Milic, Ghewa Alsabeh, Masaud Hassan S Almalki

Hybrid perovskites are emerging as top contenders in the next generation of photovoltaics, yet their stability under operational conditions remains a significant challenge. Specifically, degradation occurs at the interface with charge transport layers in p ...

2024

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose conseque ...

Wiley-V C H Verlag Gmbh2023

Buried Interface Engineering Enables Efficient and 1,960-hour Isos-L-2i Stable Inverted Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Felix Thomas Eickemeyer, Xiong Li, Mathias Dankl, Mingyang Wei, Virginia Carnevali, Nikolaos Lempesis, Lorenzo Agosta

High-performance perovskite solar cells (PSCs) typically require interfacial passivation, yet this is challenging for the buried interface, owing to the dissolution of passivation agents during the deposition of perovskites. Here, we overcome this limitati ...

Zenodo2023

Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells

Christophe Ballif, Sylvain Nicolay, Quentin Thomas Jeangros, Antoine Descoeudres, Soo-Jin Moon, Andrea Ingenito, Philippe Wyss, Arnaud Walter

Silicon solar cells based on high temperature passivating contacts are becoming mainstream in the photovoltaic industry. Here, we developed a high-quality boron-doped poly-silicon hole contact. When combined with a co-processed phosphorus-doped poly-silico ...

Royal Soc Chemistry2023

Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

Hiroaki Jinno, Felix Thomas Eickemeyer, Lukas Pfeifer

Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing ...

Wiley-V C H Verlag Gmbh2023

22.8% full-area bifacial n-PERT solar cells with rear side sputtered poly-Si (n) passivating contact

Christophe Ballif, Sylvain Nicolay, Andrea Ingenito, Bertrand Yves Paul Paviet-Salomon, Sofia Libraro

High-temperature compatible passivating contacts based on phosphorus doped polysilicon (poly-Si(n)) on a thin silicon oxide, employed on the rear side of bifacial n-PERT like solar cells provide an efficiency increase while being compatible with current ph ...

ELSEVIER2023

Fully Aromatic Self-Assembled Hole-Selective Layer toward Efficient Inverted Wide-Bandgap Perovskite Solar Cells with Ultraviolet Resistance

Mohammad Khaja Nazeeruddin, Peng Gao

Ultraviolet-induced degradation has emerged as a critical stability concern impeding the widespread adoption of perovskite solar cells (PSCs), particularly in the context of phase-unstable wide-band gap perovskite films. This study introduces a novel appro ...

Wiley-VCH Verlag GmbH2023

Zn(II) and Cu(II) tetrakis(diarylamine)phthalocyanines as hole-transporting materials for perovskite solar cells

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Kasparas Rakstys, Jianxing Xia, Maria Cristina Momblona Rincón, Cansu Igci, Nadja Isabelle Desiree Klipfel

Finding new hole-transporting materials (HTMs) suitable for replacing the state-of-the-art spiro-OMe-TAD is still challenging. In this work, newly synthesized diarylamine-substituted metal phthalocyanines (MPcs, M 1/4 Zn(II) or Cu(II)) functionalized with ...

ELSEVIER SCI LTD2022

Perovskite Solar Cells with Carbon-Based Electrodes - Quantification of Losses and Strategies to Overcome Them

Ulf Anders Hagfeldt, Bowen Yang, Jiajia Suo

Carbon-based electrodes represent a promising approach to improve stability and up-scalability of perovskite photovoltaics. The temperature at which these contacts are processed defines the absorber grain size of the perovskite solar cell: in cells with lo ...

WILEY-V C H VERLAG GMBH2022

Strain effects on halide perovskite solar cells

Mohammad Khaja Nazeeruddin, Ulf Anders Hagfeldt, Bowen Yang, Hobeom Kim, Jiajia Suo

Halide perovskite solar cells (PSCs) have achieved power conversion efficiencies (PCEs) approaching 26%, however, the stability issue hinders their commercialization. Due to the soft ionic nature of perovskite materials, the strain effect on perovskite fil ...

Royal Society of Chemistry2022

Maltose as an Ecofriendly Modifier of the Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells

Hong Zhang

A new concept of modifying the buried interface with ecofriendly material to improve the photovoltaic performance of inverted perovskite solar cells (PSCs) is proposed. A low-cost and ecofriendly maltose with multihydroxyl groups is facilely chosen for the ...

WILEY-V C H VERLAG GMBH2022