Publications associées à Close and selective integration of carbon nanomaterials by cvd onto working microelectrodes of multi sensing electrochemical biosensors

Publications associées (42)

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Gas Separation Membranes with Atom-Thick Nanopores: The Potential of Nanoporous Single-Layer Graphene

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu, Deepu Joseph Babu, Cédric Karel J Van Goethem

Gas separation is one of the most important industrial processes and is poised to take a larger role in the transition to renewable energy, e.g., carbon capture and hydrogen purification. Conventional gas separation processes involving cryogenic distillati ...

AMER CHEMICAL SOC2022

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Lei Zhang, Kumar Varoon Agrawal, Kangning Zhao

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wiley-V C H Verlag Gmbh2024

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022

In Situ Monitoring of the Surface Evolution of a Silver Electrode from Polycrystalline to Well-Defined Structures

Yunchang Liang

Capturing the surface-structural dynamics of metal electrocatalysts under certain electrochemical environments is intriguingly desired for understanding the behavior of various metal-based electrocatalysts. However, in situ monitoring of the evolution of a ...

AMER CHEMICAL SOC2022

Atomic layer deposition of Ni and Ni80Fe20 for tubular spin-wave nanocavities

Maria Carmen Giordano

Magnetic thin films and magnetic nanostructures have become essential components of modern technological applications. Modern branches of magnetisms focus on spin-charge coupling (spintronics) and the collective excitation of spin waves in magnetically ord ...

EPFL2021

Rapid screening of nanopore candidates in nanoporous single-layer graphene for selective separations using molecular visualization and interatomic potentials

Luc Sébastien Bondaz

Nanoporous single-layer graphene is promising as an ideal membrane because of its extreme thinness, chemical resistance, and mechanical strength, provided that selective nanopores are successfully incorporated. However, screening and understanding the tran ...

AIP Publishing2021

Molecular simulation on two-dimensional nanoporous material for energy-efficient separation

Mohammad Tohidivahdat

The energy-consumption by the chemical and petrochemical industry in the European Union (EU) accounts for about quarter of its energy footprint. Approximately half of this energy goes toward chemical separation, currently dominated by thermally-driven pro ...

EPFL2023

Mechanistic study on the evolution of vacancies in graphene by oxidation by scanning tunneling microscopy

Shaoxian Li

Nanostructured graphitic materials, including graphene hosting Å to nanometer-sized pores, have attracted attention for various applications such as separations, sensors, and energy storage. Graphene with Å-scale pores is a promising next-generation materi ...

EPFL2023

Etching nanopores in single-layer graphene with a sub-angstrom resolution in molecular sieving

Shiqi Huang

Single-layer graphene (SLG) membranes, hosting molecular-sieving nanopores have been regarded as the ultimate gas separation membranes, attributing to the fact that they are the thinnest possible molecular barrier. However, the expected attractive performa ...

EPFL2021

Amperometric Measurements by a Novel Aerosol Jet Printed Flexible Sensor for Wearable Applications

Sandro Carrara, Sarah Tonello

the last years, increasing interest has been addressed on wearable devices for the continuous monitoring of biochemical profiles of patients and athletes. Among various markers, lactate represents one of the most interesting to deepen the knowledge on fati ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Electrochemical and morphological engineering of 2D materials for nanopore sensing

Martina Lihter

Nanopores are nanometer-sized holes that were initially proposed for DNA sequencing. Several years ago sequencing was made possible with biological nanopores. However, solid-state nanopores have plenty of advantages to offer compared to their biological co ...

EPFL2020

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Centimeter-scale gas-sieving nanoporous single-layer graphene membrane

Kumar Varoon Agrawal, Shiqi Huang, Mostapha Dakhchoune, Guangwei He, Luc Sébastien Bondaz, Wan-Chi Lee

High-permeance, molecular-sieving, nanoporous single-layer graphene (NSLG) membranes are highly promising for gas separation. However, the formation of cracks during the transfer of NSLG to a low-cost porous support is difficult to avoid. These cracks are ...

2020

In situ construction of graphdiyne based heterojunctions by a deprotection-free approach for photocatalytic hydrogen generation

Cong Wang, Jian Li

Graphdiyne (GDY) with a direct bandgap, high charge carrier mobility, and ordered pore structure, is considered an excellent matrix for the construction of heterojunction photocatalysts. However, the traditional fabrication methods for GDY-based heterojunc ...

Royal Society of Chemistry2023

Imaging the Heterogeneity of the Oxygen Evolution Reaction on Gold Electrodes Operando: Activity is Highly Local

Sylvie Roke, Arianna Marchioro, Igor Nahálka

Understanding the mechanism of the oxygen evolution reaction (OER), the oxidative half of electrolytic water splitting, has proven challenging. Perhaps the largest hurdle has been gaining experimental insight into the active site of the electrocatalyst use ...

2020

Inkjet-Printed Carbon Nanotube Electrodes Modified with Dimer-captosuccinic Acid-Capped Fe3O4 Nanoparticles on Reduced Graphene Oxide Nanosheets for Single-Drop Determination of Trifluoperazine

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

Here we report the design of a disposable single-drop voltammetric sensor for the quantitative determination of antipsy-chotic drug trifluoperazine (TFP). The sensor was build using inkjet-printed carbon nanotube (CNT) electrodes which were modified with d ...

2020