Publications associées à Surface, Interface, and Bulk Electronic and Chemical Properties of Complete Perovskite Solar Cells: Tapered Cross-Section Photoelectron Spectroscopy, a Novel Solution

Publications associées (42)

Visualising ionic screening in perovskite solar cells: a bumpy ride along the J–V curve

The J–V bump and hysteresis in perovskite solar cells are studied combining measurement and simulation, linking them to spatial collection efficiency changes from ionic charge accumulation, as visualised in external quantum efficiency (EQE) spectra. ...

Royal Society of Chemistry (RSC)2025

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Mingyang Wei, Likai Zheng

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conduct ...

Wiley-VCH Verlag GmbH2025

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Christophe Ballif, Antonin Faes, Marion Solange Madeleine Dussouillez, Christian Michael Wolff

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

2025

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Nikolaos Lempesis, Mingyang Wei, Virginia Carnevali, Lorenzo Agosta, Vladislav Slama

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improveme ...

NATURE PORTFOLIO2025

Facile and Low-Cost Design Alternative of Spiro-OMeTAD as p-Type Semiconductor for Efficient Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

A simple diphenylamine-based hole transporting material V1553 was synthesized and incorporated into a perovskite solar cell, which showed remarkable power conversion efficiency close to 23%. The investigated HTM was synthesized via one-step catalyst-free c ...

WILEY-V C H VERLAG GMBH2025

Buried SnI2 Induces Gradient Heterojunctions in Sn–Pb Perovskite Solar Cells

Chenxu Zhao

Tin–lead (Sn–Pb) mixed perovskite solar cells (PSCs) offer the potential for higher power conversion efficiency (PCE) than their pure lead counterparts. However, the lack of a well-defined Sn/Pb compositional profile results in disordered internal electric ...

American Chemical Society (ACS)2025

Aryl-Acetylene Layered Hybrid Perovskites in Photovoltaics

Christophe Ballif, Aïcha Hessler-Wyser, Michael Graetzel, Ursula Röthlisberger, Mostafa Rabie Shlaly Bahr Othman, Masaud Hassan S Almalki, Fatemeh Ansari, Felix Thomas Eickemeyer, Ghewa Alsabeh, Lukas Pfeifer, Christian Michael Wolff, Nikolaos Lempesis, Virginia Carnevali, Vladislav Slama, Andrea Vezzosi

Metal halide perovskites have shown exceptional potential in converting solar energy to electric power in photovoltaics, yet their application is hampered by limited operational stability. This stimulated the development of hybrid layered (two-dimensional, ...

WILEY-V C H VERLAG GMBH2025

Spiro-Phenothiazine Hole-Transporting Materials: Unlocking Stability and Scalability in Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jaeki Jeong, Likai Zheng

Improving both the efficiency and long-term stability of perovskite solar cells (PSCs) is critical for their commercial deployment. Despite the widespread use of spiro-OMeTAD as a hole-transporting material (HTM), its inhomogeneous doping behavior and susc ...

2025

Machine-learning-empowered FDTD/FEM simulations for predictive solar energy absorption in plasmonic metamaterial nanocavity arrays

Amir Jafargholi

FDTD/FEM simulations, strengthened by machine learning, achieve 95.44% optical absorption efficiency in TiO 2 /TiN plasmonic nanocavities for solar energy harvesting. ...

Royal Society of Chemistry (RSC)2025

BattINFO Converter: An Automated Tool for Semantic Annotation of Battery Cell Metadata

Corsin Battaglia, Nukorn Plainpan

Driven by the global demand for batteries with improved performance, cost efficiency, and sustainability, battery research has expanded rapidly during recent years, generating a surge in data which offers the potential to accelerate the discovery of new ba ...

Wiley2025

Hybrid Ag-mesh/Ta-doped TiO2 thin film configuration as a visible and near-infrared transparent electrode

Andreas Schueler, Jérémy Jacques Antonin Fleury, Krishna Manwani

This study focuses on the fabrication of a hybrid Ag-mesh/Ta-doped TiO2 (TTO) electrode that has a low sheet resistance and high transparency in the visible and near-infrared region, thereby holding significant commercialization potential. Here, ∼82 nm thi ...

2025

Structural and magnetic properties of β-Li2IrO3 after grazing-angle focused ion beam thinning

Christian Rüegg

Manipulating the size and orientation of quantum materials is often used to tune emergent phenomena, but precise control of these parameters is also necessary from an experimental point of view. Various synthesis techniques already exist, such as epitaxial ...

2025

A Spatiotemporal analysis of photovoltaic electricity storage potential in electric vehicles

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

Decarbonizing mobility and integrating more renewable sources in electricity production are necessary levers to meet the climate targets. Coupling electric vehicle (EV) charging with photovoltaic (PV) electricity generation could help to provide clean elec ...

Aalborg University2025

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Utilization of small molecules as passivation materials for perovskite solar cells (PSCs) has gained significant attention recently, with hundreds of small molecules demonstrating passivation effects. In this study, a high-accuracy machine learning model i ...

Wiley-VCH Verlag Gmbh2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Christophe Ballif, Aïcha Hessler-Wyser, Antonin Faes, Jacques Levrat, Matthieu Despeisse, Gianluca Cattaneo, Fahradin Mujovi, Kléber Nicolet-dit-Félix, Umang Bhupatrai Desai

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Marion Solange Madeleine Dussouillez

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

EPFL2024

A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Olatz Arriaga Arruti

Silicon heterojunction (SHJ)-solar modules-when encapsulated with ethylene vinyl acetate (EVA)-are known to be extremely sensitive to water ingress. The reason for this is, however, not clear. Here, we explain the root causes of this degradation mechanism ...

Cell Press2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024