Publications associées à Results of thermal Strain and Conductor Elongation upon Heat Treatment for Nb3Sn Cable-in-Conduit Conductors

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Olivier Sauter, Hartmut Zohm, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

IOP Publishing Ltd2024

Impact of Hysteresis Losses in Hybrid (HTS-LTS) Coils for Fusion Applications

Davide Uglietti

Several conductor designs featuring High Temperature Superconducting (HTS) stacked tapes for fusion coils are being proposed. These conductors are planned to operate in time-varying magnetic field and current; thus, the estimation of AC losses is fundament ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Plasma turbulence simulations in a diverted tokamak with applied resonant magnetic perturbations

Joaquim Loizu Cisquella, Paolo Ricci, António João Caeiro Heitor Coelho, Théophile Boinnard

The first results of three-dimensional, flux-driven, electrostatic, global, two-fluid turbulence simulations of a diverted tokamak configuration with applied resonant magnetic perturbations generated by a set of saddle coils are presented. The simulations ...

IOP Publishing Ltd2023

Global 'zero particle flux-driven' gyrokinetic analysis of the density profile for a TCV plasma

Stephan Brunner, Olivier Sauter, Gabriele Merlo, Alberto Mariani

The tokamak `a configuration variable (TCV) is a small-sized tokamak, where finite size effects (often called 'rho-star' or 'global' effects) could significantly impact the heat and particle fluxes, leading to discrepancies between gyrokinetic flux-tube re ...

IOP Publishing Ltd2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Physics of runaway electrons with shattered pellet injection at JET

Javier García Hernández, Cristian Sommariva, Gergely Papp

Runaway electrons (REs) created during tokamak disruptions pose a threat to the reliable operation of future larger machines. Experiments using shattered pellet injection (SPI) have been carried out at the JET tokamak to investigate ways to prevent their g ...

2022

Runaway dynamics in tokamak disruptions with current relaxation

The safe operation of tokamak reactors requires a reliable modelling capability of disruptions, and in particular the spatio-temporal dynamics of associated runaway electron currents. In a disruption, instabilities can break up magnetic surfaces into chaot ...

Cambridge University Press2022

Turbulent transport regimes in the tokamak boundary and operational limits

Paolo Ricci, Maurizio Giacomin

Two-fluid, three-dimensional, flux-driven, global, electromagnetic turbulence simulations carried out by using the GBS (Global Braginskii Solver) code are used to identify the main parameters controlling turbulent transport in the tokamak boundary and to d ...

2022

A fast-moving Langmuir probe array for the divertor of the Tokamak à Configuration Variable

Hugo De Oliveira

In next step tokamaks such as ITER and future fusion power plants, wall materials will be subjected to considerably higher heat and particle fluxes than in present-day machines. Maintaining plasma facing components in good condition and simultaneously assu ...

EPFL2021

Towards understanding reactor relevant tokamak pedestals

Jonathan Graves, Ben McMillan, Daniele Brunetti

The physics of the tokamak pedestal is still not fully understood, for example there is no fully predictive model for the pedestal height and width. However, the pedestal is key in determining the fusion power for a given scenario. If we can improve our un ...

IOP Publishing Ltd2021

Quench analysis of the DEMO CS1 coil

Kamil Sedlák

The European DEMOnstration Fusion Power Plant (EU-DEMO) is being designed as an intermediary stage between the ITER experimental reactor and future commercial fusion power plants. The EU-DEMO is based on the tokamak concept with a fully superconducting mag ...

2020

Sawtooth control with modulated ICRH in JET-ILW H-mode plasmas

Jonathan Graves

Sawtooth pacing with modulated ion-cyclotron resonance heating (ICRH) has been demonstrated to be very efficient in JET-ILW L-mode plasmas (Lerche et al 2017 Nucl. Fusion 57 036027, Lennholm et al 2017 Fusion Eng. Des. 123 535-40), where the main heat sour ...

IOP Publishing Ltd2020

Global Flux-Driven Simulations of Ion Temperature-Gradient and Trapped-Electron Modes Driven Turbulence with an Improved Multithreaded Gyrokinetic PIC Code

Emmanuel Lanti

Performance of tokamak fusion plasmas is heavily linked to the radial heat and particle transport, which is known to be mainly produced by turbulence driven by micro-instabilities. Understanding such processes is thus of key importance for the design and o ...

EPFL2019

Conduction-based model of the Scrape-Off Layer power sharing between inner and outer divertor in diverted low-density tokamak plasmas

Basil Duval, Holger Reimerdes, Marco Wischmeier, Benoît Labit, Christian Gabriel Theiler, Hugo De Oliveira, Wouter Vijvers, Cedric Kar-Wai Tsui, Umar Sheikh, Kevin Henricus Annemarie Verhaegh, Nicola Vianello, Roberto Maurizio, Mirko Wensing

A simple analytic model for the repartition of the Scrape-Off Layer (SOL) exhaust power between the inner and outer divertors in a diverted low-density tokamak plasma is introduced. Electron heat conduction is assumed to dominate the heat transport, from t ...

Elsevier2019

Heat-transfer at the interface between a metal and a non-metal: influence of ultra-thin interlayers, interface chemistry and atomic order

Maïté Blank

The Thermal Boundary Conductance (TBC) at the interface between metals and dielectrics is of key importance for heat transport in structures heterogeneous on a scale from 100 µm downwards. In this thesis the TBC of a large number of metal/dielectric couple ...

EPFL2019

Thermal, electromagnetic and structural analysis of gas baffles for the TCV divertor upgrade

Dario Vaccaro

As part of an ongoing divertor upgrade of the TCV tokamak it is planned to add gas baffles to form a divertor chamber of variable closure. The baffles promise to increase the compression of neutral particles in the divertor and, thereby, extend the researc ...

2019

Thermal, electromagnetic and structural analysis of gas baffles for the TCV divertor upgrade

Basil Duval, Jean-Marc Moret, Holger Reimerdes, Christian Gabriel Theiler, Matthieu Toussaint, Dario Vaccaro

As part of an ongoing divertor upgrade of the TCV tokamak it is planned to add gas baffles to form a divertor chamber of variable closure. The baffles promise to increase the compression of neutral particles in the divertor and, thereby, extend the researc ...

2019

Overview of physics studies on ASDEX Upgrade

Basil Duval, Timothy Goodman, Richard Pitts, Olivier Sauter, Stefano Coda, Alberto Bottino, Marco Wischmeier, Andrea Scarabosio, Hartmut Zohm, Laurie Porte, Yann Camenen, Thomas Binderup Jensen, Benoît Labit, Emiliano Fable, Alessandro Bortolon, Federico Alberto Alfredo Felici, Fang Liu, Dávid Wágner, Antoine Pierre Emmanuel Alexis Merle, Emanuele Poli, Nicola Vianello, Giovanni Tardini, Cristian Sommariva, Alessandro Pau, Otto Asunta, Haomin Sun, Xiao Wang, Gergely Papp, Bernhard Sieglin

The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heat ...

IOP Publishing Ltd2019

Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activity

Holger Reimerdes

Power exhaust scenario and divertor design for a steady-state Japan (JA) DEMO and a pulse Europe (EU) DEMO1 have been investigated as one of the most important common issues in Broader Approach DEMO Design Activity. Radiative cooling is a common approach f ...

ELSEVIER SCIENCE SA2018