Publications associées à Advanced foil activation techniques for the measurement of within-pin distributions of the 63Cu(n,)64Cu reaction rate in nuclear fuel

Atomic level insight into irradiation effects in nuclear fuel materials

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...

EPFL2024

Gamma-ray Spectroscopy in Low-Power Nuclear Research Reactors

Andreas Pautz, Oskari Ville Pakari, Vincent Pierre Lamirand

Gamma-ray spectroscopy is an effective technique for radioactive material characterization, routine inventory verification, nuclear safeguards, health physics, and source search scenarios. Gamma-ray spectrometers typically cannot be operated in the immedia ...

MDPI2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Intra-pin Reaction Rate Measurements in the CROCUS Experimental Reactor

Andreas Pautz, Oskari Ville Pakari, Vincent Pierre Lamirand, Mathieu Hursin, Thomas Jean-François Ligonnet, Tom Mager

In response to the need for validating high-fidelity deterministic neutronics solvers capable of providing pin-resolved neutron flux distributions, intra-pin reaction rates measurements were performed in the CROCUS experimental reactor. A specially designe ...

2024

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Oskari Ville Pakari, Vincent Pierre Lamirand

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Monte Carlo analysis of BWR geometries using a cycle check-up methodology

Abdelhamid Dokhane, Hakim Ferroukhi, Alexander Vasiliev, Mathieu Hursin, Dimitri Rochman

Recent fuel anomalies at a Swiss power plant have motivated the development at PSI of the "Cycle Check-Up" (CHUP) methodology which consists in performing Monte Carlo transport calculations using nuclide compositions and thermal-hydraulic boundary conditio ...

Pergamon-Elsevier Science Ltd2023

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Alessandro Scolaro, Carlo Fiorina, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...

ELSEVIER SCIENCE SA2023

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

Preliminary safety analysis of the TRANSMUTEX sub-critical reactor using the GeN-Foam multi-physics solver

Andreas Pautz, Carlo Fiorina, Thomas Arthur Louis Joseph Guilbaud

This work presents a preliminary safety analysis of the accelerator-driven system under development at TRANSMUTEX. It is a sub-critical lead-cooled fast reactor with a nominal power of 300 MWth having the following features: (1) an inert-matrix fuel; (2) a ...

Pergamon-Elsevier Science Ltd2023

Design of an Instrumented Fuel Rod for Intra-pin Neutron Flux Measurements in the CROCUS Experimental Reactor

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Thomas Jean-François Ligonnet, Won Dong Shin, Tom Mager

In response to the need for validating high-fidelity deterministic neutronics solvers capable of pin-resolved neutron flux distributions, an instrumented fuel rod was designed for the experimental reactor CROCUS, operated by EPFL’s Laboratory for Reactor P ...

2023

Data-Driven Predictive Models: Calculational Bias in Characterization of Spent Nuclear Fuel

Characteristics of the spent nuclear fuel (SNF) are typically calculated, requiring validation a priori. The validation process relies on the difference between calculations and measurements, namely the bias. Usually, predicting the bias based on benchmark ...

EPFL2022

Validation of spent nuclear fuel decay heat calculations using Polaris, ORIGEN and CASMO5

Stefano Caruso, Andreas Pautz, Dimitri Rochman

Decay heat calculations of spent nuclear fuel (SNF) using Polaris and ORIGEN codes in the SCALE code sys-tem, and CASMO5 code, are validated using measurements from the Clab and GE-Morris facilities. Multiple hypothesis testing, relying on permutations and ...

PERGAMON-ELSEVIER SCIENCE LTD2022

High accuracy measurement of the prompt neutron decay constant in CROCUS using Gamma Noise and bootstrapped uncertainties

Pavel Frajtag, Andreas Pautz, Oskari Ville Pakari, Vincent Pierre Lamirand, Tom Mager

We experimentally demonstrate the advantages of gamma detection for noise measurements to deter-mine the prompt neutron decay constant a of a nuclear reactor using the power spectral density (PSD) method, coupled to a new uncertainty estimation scheme base ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

A concept for the extraction of the most refractory elements at CERN-ISOLDE as carbonyl complex ions

João Pedro Fernandes Pinto Ramos

We introduce a novel thick-target concept tailored to the extraction of refractory 4d and 5d transition metal radionuclides of molybdenum, technetium, ruthenium and tungsten for radioactive ion beam production. Despite the more than 60-year old history of ...

2022

Development of a Novel Finite Volume Methodology for Multi-Dimensional Fuel Performance Applications

Alessandro Scolaro

Fuel performance codes are an essential tool for ensuring the safe and economic opera-tion of nuclear reactors. Traditionally, these codes have been developed following a simple 1.5-D modelling approach, where the fuel behavior is simplified by assuming ax ...

EPFL2021

Growth and viability of microorganisms in bentonite and their potential activity in deep geological repository environments

Niels Burzan

Radioactive waste is among the most dangerous anthropogenic waste and its safe disposal is a challenging multi-generational task. Many nations have sought for the peaceful application of nuclear fission for the reliable production of electric energy to pow ...

EPFL2021

Interface Tracking Investigation of the Sliding Bubbles Effects on Heat Transfer in the Laminar Regime

Konstantin Mikityuk, Lubomír Bures

Helium gases are utilized to remove fission products from the molten salt fast reactor (MSFR) core during operation. Helium gases and other volatile fission products may be introduced into the intermediate heat exchanger channels. The effect of these gases ...

2022

Structural performance and mechanical properties investigation of spent nuclear fuel rods under static and dynamic bending loads

Efstathios Vlassopoulos

Currently, most Spent Nuclear Fuel (SNF) is kept safely in storage either at on-site facilities or at centralized interim storage sites. Moreover, many countries face delays in implementing their waste management programmes for SNF and high-level waste dis ...

EPFL2021