Publications associées à Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Jan Van Herle, Zoé Mury, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

New Polymers from Biomass-Derived Hydroxycinnamic Acid Derivatives

Ghezae Tekleab

Polymers play a central role in shaping our world across various fields, but their heavy reliance on petrochemicals poses climate change, environmental and health risks. To address and alleviate these issues, transitioning to sustainable polymers, sourced ...

EPFL2024

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Sandro Carrara

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Revealing the Formation Dynamics of Janus Polymer Particles: Insights from Experiments and Molecular Dynamics

Philip Robin Loche

Seeded emulsion polymerization is one of the best-known methods for preparing polymer particles with a controlled size, composition, and shape. It first requires the preparation of seed particles, which are then swollen with additional monomer (the same as ...

Amer Chemical Soc2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Opportunities, Challenges, and Pitfalls in Making, Characterizing, and Understanding Polymer Brushes

Harm-Anton Klok

Polymer brushes have been theoretically described, their behavior under diverse conditions has been modeled, and their preparation via surface-initiated polymerizations (SIPs) has been progressively refined. However, despite three decades of research endea ...

American Chemical Society2023

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023

Charging and Electric Field Effects on Hydrogen Molecules Physisorbed on Graphene

Klaus Kern, Shai Mangel, Alessio Scavuzzo, Tobias Wollandt

Molecular hydrogen adsorbed on graphene was investigated by analyzing rotational excitation spectra obtained with a gate-tunable scanning tunneling microscope (STM). Through the shift of the rotational excitation energy, the tunability of physisorbed H2 on ...

AMER CHEMICAL SOC2023

Tri-axial H-Field Sensor with Frequency-shaped Response in the band 400 MHz - 6 GHz

German Augusto Ramirez Arroyave

This contribution presents an isotropic field probe to assess human exposition to broadband magnetic fields in the 400 MHz to 6 GHz band according to the ICNIRP 2020 guidelines. This device complements the current practice in this band, based on the measur ...

IEEE2023

Engineering extracellular electron transfer for enhanced energy harvesting in microbial electrochemical devices

Mohammed Mouhib

Microorganisms known as exoelectrogens evolved the ability of transporting electrons across insulating biological membranes. In a physiological context, this enables respiration on extracellular electron acceptors and electron transfer to other organisms. ...

EPFL2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Data-driven design of organic electronic materials

Jacob Terence Blaskovits

Singlet fission (SF) is a multiexciton-generating process whereby an excited state singlet (S1) is converted into two lower-energy triplets (T1). The inclusion of a SF-capable material into a photovoltaic device offers the potential for the absorption of p ...

EPFL2023

Universal machine learning for the response of atomistic systems to external fields

Yaolong Zhang

Machine learned interatomic interaction potentials have enabled efficient and accurate molecular simulations of closed systems. However, external fields, which can greatly change the chemical structure and/or reactivity, have been seldom included in curren ...

Nature Portfolio2023